Abstract:The fundamental aspects of temperature- and composition-dependent site preference of alloying elements on sublattice of Co3Al-based γ′ phase with L12 structure have not been well understood, which hinders the design of advanced Co-based high-temperature alloys. In this work, the temperature- and composition-dependent site preferences of the binary, ternary, and quaternary Co3Al-based γ′ phase alloyed with Mi were studied using a two-sublattice thermodynamic involving site occupying fractions (SOFs). The SOFs were calculated using a thermodynamic software package based on a thermodynamic database established in this work, where the temperature-dependent thermodynamic data were obtained using first-principles calculations based on density-functional theory (DFT) and density-functional perturbation theory (DFPT). The additional alloying elements Mi added represent the transitional metals Cr, Cu, Fe, Mn, Mo, Ni, Re, Ta, Ti, V, or W (arranged in alphabetical order). The results show that there is an obvious order-disorder transition for the stoichiometric and non-stoichiometric binary Co3Al as well as in ternary and quaternary Co3Al-based systems alloyed by adding additional transition metals around the solvus temperature. For the stoichiometric Co3Al γ′ phase, the critical temperature is about 1073 K, accompanied with the site configuration changes from (Al)1a(Co)3c at room temperature to (Al0.2590Co0.7409)1a (Al0.2469Co0.7530)3c at 1273 K, while this order-disorder transition was not found in the Ni3Al-based γ′ phase, a counterpart of Co3Al-based γ′ phase. When x Co/x Al is over 3:1, for example, the non-stoichiometric Co3Al–based binary γ′ phases 78Co-22Al show continuously order-disorder transition characteristics with a broadened transition temperature range. For the γ′ phase with the composition 78Co-26Al-4 Mi which is normalized as 72.22Co-24.08Al-3.7 Mi (at%), where we kept x Co/x Al = 3:1 to study the ordering behaviors of the additional alloying transition metals Mi conveniently. It is revealed that Cu, Fe, Mn, and Ni atoms always prefer the 3c sublattice (Co site), and Mo, Ta, Ti, and W atoms always prefer the 1a sublattice (Al site) in the whole temperature range, while the site preferences of Cr, Re, and V atoms are affected by the heat treatment temperature. For example, when the heat treatment temperature is lower than 700 K, Cr and V atoms randomly occupy 1a and 3c sublattice, and Re atoms prefer to 3c sublattice, while when the heat treatment temperature is higher than 1273 K, Cr atoms prefer 3c sublattice, V atoms prefer to 1a sublattice, and all Re atoms occupy 3c sublattice exclusively. The site preference of the quaternary system with a selective composition 78Co-26Al-2 M1-2 M2, which is normalized as 72.22Co-24.08Al-1.85 M1-1.85 M2 (at%) has been also investigated. The additional alloying transition metals Mi added modulate the order-disorder transition characteristics of Co3Al-based γ′-precipitate with different amplitudes. The order-disorder transition temperatures for some selected alloys were verified experimentally using DSC. Based on the causal relationship of structure and mechanical properties, according to the modulating amplitude of the order-disorder transition behavior, we recommend that the additional alloying elements added such as Cu, Mn, and Mo atoms make the mechanical properties degrade gradually, and thus the structural components avoid sudden damage, which is beneficial for the safety of the engine component at high operating temperature.

Element-configuration dependent first-principles machine learning studies of multiple alloying effects on the structure stability of Co 3 (Al, W)

Machine learning aided first-principles studies of structure stability of Co3(Al, X) doped with transition metal elements

Compositional Undulation Induced Strain Hardening and Delocalization in Multi-Principal Element Alloys

Facilitated the discovery of new γ/γ′ Co-based superalloys by combining first-principles and machine learning

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Co-based alloys design based on first-principles calculations: Influence of transition metal and rare-earth alloying element on stacking fault energy

Elemental preference and atomic scale site recognition in a Co-Al-W-base superalloy

Machine learning assisted design of γ′-strengthened Co-base superalloys with multi-performance optimization

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

The ordering behavior of Co3Al-based γ′ phase with L12 structure predicted by the thermodynamic model with support of first-principles calculations

Site preference and effect on shear deformation of co-alloying elements addition to γ′-Ni3Al phase in Ni-based single crystal superalloys

Atomic site occupancy of alloying elements and Laves phase stability in γ-γ′ Co-base superalloys

Predictions on the Phase Constitution of SmCo7−XMx Alloys by Data Mining

Composition optimization of cobalt-free Fe-Cr-Ni-Al/Ti multi-principal element alloys for strength-ductility trade-off based on machine learning

Machine Learning Assisted Design of High Entropy Alloys with Desired Property

Accelerating design of novel Cobalt‐based superalloys based on first-principles calculations

Alloy design and properties optimization of multi-component alloy based on solidification characteristics

First-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

Investigation of the Elemental Partitioning Behaviour and Site Preference in Ternary Model Nickel-Based Superalloys by Atom Probe Tomography and First-Principles Calculations