Abstract:Magnesium sulphoaluminate (MSA) cement has good bonding properties and is suitable as an inorganic adhesive for repairing materials in civil engineering. However, there are still some problems with its use, such as its insufficient 1 day (d) strength and poor volumetric stability. This paper aims to investigate the influences of metakaolin (MK) on the physical and mechanical properties of magnesium sulphoaluminate (MSA) cement. The hydration products and microstructures of typical MSA cement samples were also analysed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that the addition of metakaolin reduces the fluidity and shortens the setting time of the MSA cement. The initial setting time and final setting time shortened maximally by 15-27 min and 25-48 min, respectively, with the addition of 10-30% metakaolin. Moreover, the compressive strength and flexural strength of the MSA cement improved significantly with the addition of 10-30% metakaolin at a curing age of 1 d. Compared with the compressive and flexural strengths of the control sample at 1 d, the compressive strengths of the modified samples showed obvious increases of 98%, 101%, and 109%, and the flexural strengths increased by 39%, 31%, and 26%, respectively, although they decreased slightly when the curing ages were 7 d, 14 d, and 28 d. The addition of 10% metakaolin improved the water resistance of the MSA cement immersed in water for 7 d and resulted in even higher water resistance at 28 d. The addition of 10-30% metakaolin improved the volumetric stability of the MSA cement with increasing dosages before 28 d of ageing. XRD and SEM-EDS analyses showed that the metakaolin accelerated the early hydration reaction and optimised the phase composition of the MSA cement. The results indicate that the addition of 10-20% metakaolin improved the strength after 1 d of ageing, water resistance, and volumetric stability of the MSA cement, providing theoretical support for the application of MAS cement as an inorganic bonding agent for repairing materials.

Microstructure Evolution Mechanism of Quaternary Phase Paste Containing Metakaolin and Silica Fume

Influence of metakaolin on the conversion and compressive strength of quaternary phase paste

Mechanical property and microstructure of quaternary phase paste blended with metakaolin

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Rheological Behavior and Microstructure Characteristics of SCC Incorporating Metakaolin and Silica Fume

Rheological and mechanical properties of aluminosilicious cementitious materials as refractory castable binders

Influence of metakaolin on the hydration and microstructure evolution of cement paste during the early stage

Microstructural evolution and degradation mechanisms of tricalcium silicate and tricalcium aluminate composite pastes under sulfate exposure

A study on the hydration of calcium aluminate cement pastes containing silica fume using non-contact electrical resistivity measurement

Strength and Pore Structure Development of High-Plasticity Clay Treated with MK-Blended Cement

Rheological behaviour, setting time, compressive strength and microstructure of mortar incorporating supplementary cementitious materials and nano-silica

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Hydration properties of magnesium phosphate cement paste mixed with metakaolin and silica fume

Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment

The Effects of Metakaolin on the Properties of Magnesium Sulphoaluminate Cement

Study on the Influence of Silica Fume (SF) on the Rheology, Fluidity, Stability, Time-Varying Characteristics, and Mechanism of Cement Paste

Effects of Retarding Admixture, Superplasticizer and Supplementary Cementitious Material on the Rheology and Mechanical Properties of High Strength Calcium Sulfoaluminate Cement Paste

Influence of Nano-Activated CaCO3-Metakaolin on Early Strength and Microstructure of Cement

Evaluating Durability: A Comparative Study on the Influence of Fly Ash and Silica Fume in Potassium Magnesium Phosphate Cement Mortar

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

MICROSTRUCTURE AND PERFORMANCE OF CEMENTING MATERIAL BASED ON ALUMINOSILICATE AND PHOSPHATE