Abstract:The development of one-part geopolymer mortars has greater potential than the traditional two-part mortars, especially in repair applications, to convert waste into useful beneficial products while simultaneously eliminating the hazards associated with the alkaline solutions. Nevertheless, the inherent brittleness exhibited by the one-part geopolymers displays drawbacks like OPC when subjected to flexural loading. The fibers selection as well as their strengthening effects from literature is considerably scarce, especially for the repairing geopolymer system. This work aims to investigate the influences of fiber types and volume fractions on the workability, physical behavior, and cracking/fatigue resistance of ambient air-cured one-part geopolymer mortar. Reaction kinetics, mineralogical phases, and elemental components were explored by means of the TAM, quantitative XRD, and EDS mapping analysis. The FESEM and X-CT were employed to compare the microstructures and pore characteristics of the fibers-reinforced products. The results show that the copper-plated steel fiber produced the least change in workability, while the basalt fiber produced the lowest flow values. Setting time was the shortest for the basalt fiber reinforced, followed by polyvinyl-alcohol fiber. The steel fiber and carbon fiber would improve the mechanical properties of mortar significantly, especially in the early stage. The fatigue strength of 1 vol% carbon fiber reinforced mortar under 2 million cycles loading was the highest (3.72 MPa). The fibers addition a substantial decrease in sphericity and compactness of the pores (high anisotropy) as evidenced by X-CT data. Moreover, three hydration heat processes occurred after water was added to the one-part geopolymer mortar, which included dissolution of Na2SiO3 particles, network degradation, and a second pozzolanic reaction. More crystalline formation occurred over curing time to form gel networks with high stability and generated different bonding modes with various fibers.

The bond between geopolymer repair mortars and OPC concrete substrate: Strength and microscopic interactions

Metakaolin Based Geopolymer Mortar As Concrete Repairs: Bond Strength and Degradation when Subjected to Aggressive Environments

Interfacial Bond Behavior Between Normal OPC Concrete and Self-Compacting Geopolymer Concrete Enhanced by Nano-Sio2

Interfacial Behavior of Slag, Fly Ash, and Red Mud-Based Geopolymer Mortar with Concrete Substrate: Mechanical Properties and Microstructure

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Molecular Insights into Adhesion at Interface of Geopolymer Binder and Cement Mortar

Microstructure and Microhardness Property of the Interface Between a Metakaolin/ggbfs-Based Geopolymer Paste and Granite Aggregate

The Influence of Moisture and Epoxy Bonding Agents on Interfacial Behavior Between Normal Concrete Substrate and Ultrahigh Performance Concrete As a Repair Material: Experimental and Molecular Dynamics Study

The Effects of Phase Changes on the Bonding Property of Geopolymer to Hydrated Cement

Mechanical and Microstructure Characterizations of Geopolymer Mortars Using Industrial Waste Materials

Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface

Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete

Characterisation at the Bonding Zone between Fly Ash Based Geopolymer Repair Materials (GRM) and Ordinary Portland Cement Concrete (OPCC)

Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces

Mechanical properties and durability of fiber reinforced geopolymer composites: A review on recent progressd

Bond Behavior and Interfacial Micro-Characteristics of Magnesium Phosphate Cement Onto Old Concrete Substrate

Optimization Design of MK-GGBS Based Geopolymer Repairing Mortar Based on Response Surface Methodology

Effect of Different Fibers on Shrinkage Properties and Bonding Properties of Geopolymer Mortar Repair Materials and Analysis of the Mechanism

Study of Interfacial Transition Zones Between Magnesium Phosphate Cement and Portland Cement Concrete Pavement

Bonding Performance and Microstructural Mechanism Between Rapid Repair Materials and Old Concrete Pavement

Experimental Investigation on the Interfacial Shear Bond Performance of Non-Water Reacting Polymer and Concrete