Abstract:This study investigates the inhibitory potential of a hydroalcoholic extract from tea waste, using the Soxhlet method, against C38 corrosion in hydrochloric acid. Electrochemical tests, including EIS and PDP, evaluated the impact of extract concentration and immersion time on corrosion inhibition. SEM/EDS analysis was performed to examine the adsorption process. The results show that inhibitor concentration significantly affects corrosion inhibition, with inhibitory efficiency (IE) values up to 97.98% according to IE and Tafel curves. Increasing extract concentration enhances corrosion inhibition via surface adsorption, following the Langmuir model, resulting in a gradual increase in charge transfer resistance over time. Maximum inhibitory efficiency is reached after 6 hours, demonstrating time-dependent corrosion inhibition. SEM analysis confirms the adsorption mechanism. In summary, this study highlights the inhibitory potential of green tea waste extracts against C38 steel corrosion in hydrochloric acid, suggesting sustainable corrosion protection methods. Theoretical methods, including DFT and MC approaches, were used to analyse the interactions between hydrochloric acid, water, and the iron surface, as well as the adsorption of catechin on Fe (110) and Fe2O3 (110) surfaces. DFT results align well with MC simulations and experimental measurements, revealing a significant correlation between molecular structure and inhibitory efficacy. Cette étude examine le potentiel inhibiteur d'un extrait hydroalcoolique de déchets de thé, utilisant la méthode Soxhlet, contre la corrosion du C38 dans un milieu acide chlorhydrique. Des tests électrochimiques, y compris les méthodes SIE et PDP, ont évalué l'impact de la concentration de l'extrait et du temps d'immersion sur l'inhibition de la corrosion. Une analyse MEC/EDS a été réalisée pour examiner le processus d'adsorption. Les résultats montrent que la concentration d'inhibiteur affecte significativement l'inhibition de la corrosion, avec des valeurs d'efficacité inhibitrice (EI) atteignant jusqu'à 97,98% selon les courbes de la SIE et de Tafel. L'augmentation de la concentration de l'extrait améliore l'inhibition de la corrosion par adsorption en surface, suivant le modèle de Langmuir, entraînant une augmentation progressive de la résistance au transfert de charge au fil du temps. L'efficacité inhibitrice maximale est atteinte après 6 heures, démontrant une inhibition de la corrosion dépendante du temps. L'analyse MEB confirme le mécanisme d'adsorption. En résumé, cette étude souligne le potentiel inhibiteur des extraits de déchets de thé vert contre la corrosion de l'acier C38 dans un environnement acide chlorhydrique, suggérant des méthodes de protection contre la corrosion durables. Des méthodes théoriques, incluant les approches DFT et MC, ont été utilisées pour analyser les interactions entre l'acide chlorhydrique, l'eau et la surface du fer, ainsi que l'adsorption de la catéchine sur les surfaces Fe (110) et Fe2O3 (110). Les résultats DFT sont en accord avec les simulations MC et les mesures expérimentales, révélant une corrélation significative entre la structure moléculaire et l'efficacité inhibitrice.

Effect of the extraction solvent on the anticorrosion of mild steel in an acid medium by two green inhibitors

Green Corrosion Inhibition of Mild Steel in 1.0 M HCl Using Myrtus Communis Essential Oil: Experimental and Theoretical Investigations

Corrosion Inhibition of A9 Steel In 1M Hydrochloric Acid by the Antioxidant Compounds of Methanolique Extracts for two Varieties of Olive Leaves: Chemlal and Rougette

Experimental and computational aspects of green corrosion inhibition for low carbon steel in HCl environment using extract of Chamaerops humilis fruit waste

Essential oil of Dysphania ambrosioides as a green corrosion inhibitor for mild steel in HCl solution

Green approach to corrosion inhibition of mild steel in hydrochloric acid and sulphuric acid solutions by the extract of Murraya koenigii leaves

Electrochemical and DFT studies of Terminalia bellerica fruit extract as an eco-friendly inhibitor for the corrosion of steel

Experimental and theoretical studies of Inula viscosa extract as a novel eco-friendly corrosion inhibitor for carbon steel in 1 M HCl

Application of Green Active Bio-Molecules from the Aquatic Extract of Mint Leaves for Steel Corrosion Control in Hydrochloric Acid (1M) Solution: Surface, Electrochemical, and Theoretical Explorations

Extraction, Characterization and Anticorrosion Potential of an Essential Oil from Orange Zest as Eco-friendly Inhibitor for Mild Steel in Acidic Solution

Anticorrosion Effect of Ethoxylate Sulfanilamide Compounds on Carbon Steel in 1 M Hydrochloric Acid: Electrochemical and Theoretical Studies

Green Ostrich fat waste extracts as a novel potential inhibitor to sustainable corrosion of steel in acidic environments: Electrochemical and DFT evaluation

Corrosion Inhibition Of Carbon Steel In Hcl Solution By Some Plant Extracts

The effect of the Oğuzlar walnut extract as a green corrosion inhibitor on AISI 1010 mild steel

Eco-conscious corrosion inhibitor synthesis via Soxhlet extraction: experimental study in HCl 1M and theoretical analysis using DFT and MC simulations

Experimental and Theoretical Investigation of the Inhibitor Efficiency of Eucalyptus globulus Leaf Essential Oil (EuEO) on Mild Steel Corrosion in a Molar Hydrochloric Acid Medium

Optimization of the inhibition corrosion of carbon steel in an acidic medium by a novel eco-friendly inhibitor Asphodelus ramosus using response surface methodology

Assessment of Warionia saharea Essential Oil as a Green Corrosion Inhibitor for Mild Steel in HCl: Experimental and Computational Studies

Preparation of corrosion inhibitor from natural plant for mild stil immersed in an acidic environmental: experimental and theoretical study

Optimization of mild steel corrosion inhibition by water hyacinth and common reed extracts in acid media using factorial experimental design

Analysis of natural okra extracts as corrosion inhibitors for mild steel in acidic medium