Abstract:To effectively eliminate optical end loss for small-scale linear solar concentrators, a fixed linear-focus Fresnel lens solar system (FLFS) with triangle cavity receiver is described and the principle is provided. The effects of the receiver parameters including receiver position f, solar declination angle <math>δ</math>, solar hour angle <math>ω</math>, internal surface absorptivity <math>αab</math> and end plane reflectivity <math>ρr</math> on the end loss ratio (<math>μoel</math>) and relative optical efficiency (<math>ηre−opt</math>) of the proposed system have been studied by the control variable method and Monte Carlo ray tracing (MCRT) method which is implemented by software TracePro®. Significance tests of critical factors are conducted to assess the effect of receiver parameters. These results revealed that the FLFS could effectively solve the problem of optical end loss of linear solar concentrators. When <math>f=650</math> mm and <math>δ</math><math>=</math> 0°, 8°, 16°, and 23°27<math>′</math>, the corresponding average <math>ηre−opt</math> at <math>ω</math> from 0° to 60° are 0.9459, 0.9422, 0.9145, and 0.8144, respectively. As <math>δ</math> increases, reducing f can ensure the system operates at a high-efficiency state. The <math>ηre−opt</math> shows a positive relationship with <math>αab</math> and no relationship with <math>ρr</math>. <math>δ</math> occupies the greatest significant influence on <math>ηre−opt</math>, which is followed by <math>ω</math>, <math>αab</math> and f.

Experimental analysis of the optical loss of a dusty Fresnel lens with a novel solar flux test system

Effects of Sinusoidal Mid-Spatial Frequency Surface Errors on Optical Transfer Function

Impacts of seasonal dust accumulation on a point-focused Fresnel high-concentration photovoltaic/thermal system

Heat-collecting performance of linear Fresnel reflector concentrator measuring and forecasting after dust accumulation

Image Enhancement for Flat and Rough Film Plasmon Superlenses by Adding Loss

Development of a Fresnel lens based high-flux solar simulator

Estimation of the influence of Fresnel lens temperature on energy generation of a concentrator photovoltaic system

Analysis on an optimal transmittance of Fresnel lens as solar concentrator

Elliptical-Shaped Fresnel Lens Design through Gaussian Source Distribution

Effects of receiver parameters on the optical efficiency of a fixed linear-focus Fresnel lens solar system with sliding adjustment

Design and Optimization of Fresnel Lens for High Concentration Photovoltaic System

Sunlight Concentration Effect Analysis of Lenses on Single-Slope Solar Still

Design and experimental verification of phase-reversal Fresnel lens for contact stress characterization

Analysis of Light Concentration Error and Compensation Algorithm of Linear Fresnel Collector

Characterization of a Test Site for the Measuring of the Focal Point of Reflective Optical Elements for Concentrator Photovoltaic

Tailoring High-Performance Illumination Lenses for Extended Non-Lambertian Sources.

An Analytical Flux Density Distribution Model with a Closed-Form Expression for a Flat Heliostat

Freeform Led Lens For Uniform Illumination

Economic fabrication of a novel hybrid planar Grating/Fresnel lens for miniature spectrometers

Improving the Quality of Fresnel VR Lenses by Creating Extra Room for Trapped Air and Evaluating Slope Angle

Design and experimental study of a Fresnel lens-based concentrated photovoltaic thermal system integrated with nanofluid spectral splitter