Abstract:Conductive elastomer composites (CECs) with high elasticity, flexibility and sealability of elastomers and the high electrical conductivity of conductive fillers have been widely used in electromagnetic interference shielding, microwave absorpting, stretchable electronics and sensors. To achieve high electrical conductivity, the commonly used fillers are metal powers, metal-coated inorganic particles and carbon black (CB). High filler content is usually required to effectively improve the conductivity, resulting in low elasticity, low flexibility, and poor processability, all of which limit the applications of CECs. Earlier works reported the synergistic effect of two kinds of fillers with different geometrical dimensions, among which CB and carbon nanotubes (CNTs) are two promising candidate that have been widely studied. However, CNTs are easily entangled and aggregated in elastomer matrix with low viscosity, resulting in unsatisfactory conductivity (mostly 104–105 Ω cm). Moreover, little attention has been paid on CECs with high elasticity, high electrical conductivity stability filled with low filler contents (low cost) for stretchable electronics and strain sensors. The relationship between conductive network and electrical conductivity as well as electrical conductivity stability is still not clear. In this study, we designed and prepared CB/CNTs/polymethylvinylsiloxane (PMVS) composites with good elasticity, high electrical conductivity and good electrical conductivity stability by tailoring the filler network structure of the composites with a low content of CB and CNTs in PMVS matrix. The composite with 1.8 vol% of CNTs and 1.2 vol% of CB showed high elasticity, low volume resistivity (271 Ω cm), and high electrical conductivity stability. CNTs used in this study were carbon nanotube arrays (CNTA) that were in situ synthesized on single-layered double hydroxide (LDH) nanosheets by chemical vapor deposition method. The negatively charged CNTs with a loose structure showed no physical entanglement, which can be well dissociated into many single CNTs and dispersed uniformly in PMVS matrix during mechanical shearing. The high aspect ratio of CNTs can help to obtain high conductivity at low filler content, whereas the isotropy of CB helps to rebuild up the new conductive network after tensile strain. On the other hand, these CNTs are curved in the elastomer matrix, become oriented during stretching, and can curve again after recovery, and thus act as nanosprings. The high elasticity of the CNTs nanosprings leads to high elasticity of the PMVS-CB-CNTs composites. We further studied the relationship between conductive network and electrical conductivity as well as electrical conductivity stability of PMVS-CB-CNTs composites. The results showed that CB and CNTs can form a strong dual conductive network at low filler contents, leading to a high conductivity. When stretching, CNTs act as bridges to connect CB and CB aggregations together, maintaining the strong conductive network and thus high electrical conductivity stability under tensile strain. After tensile recovery, CB and CNTs can reform a strong conductive network, leading to high electrical stability during tensile-release cycles.

Large cyclic deformability of microcellular TPU/MWCNT composite film with conductive stability, and electromagnetic interference shielding and self-cleaning performance

High Strain Tolerant EMI Shielding Using Carbon Nanotube Network Stabilized Rubber Composite

Facile thermoplastic polyurethane-based multi-walled carbon nanotube ink for fabrication of screen-printed fabric electrodes of wearable e-textiles with high adhesion and resistance stability under large deformation

Ultrathin and Flexible Carbon Nanotube/polymer Composite Films with Excellent Mechanical Strength and Electromagnetic Interference Shielding

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions

Design and Preparation of Carbon Black/carbon Nanotubes/silicone Elastomer Composites with High Elasticity and High Electrical Conductivity Stability

Tough, stretchable dual-network liquid metal-based hydrogel toward high-performance intelligent on-off electromagnetic interference shielding, human motion detection and self-powered application

Flexible microfibrillated cellulose/carbon nanotube multilayered composite films with electromagnetic interference shielding and thermal conductivity

Highly conductive and flexible polymer composites with improved mechanical and electromagnetic interference shielding performances.

Sandwich-Structured Carbon Nanotube Composite Films for Multifunctional Sensing and Electrothermal Application

Recyclable, healable, and stretchable thermoset shape memory polythiourethane/carbon nanotube composite with segregated conductive structure for strain sensing

Strong breathable membrane with excellent self‐cleaning, wave‐transparent, and heat dissipation performances

Flexible, Quickly Responsive, and Highly Efficient Carbon Nanotube/Thermoplastic Polyurethane Composite Yarn for Multifunctional Wearable Devices

Multilayer Ti3C2Tx MXene/graphene oxide/carbon fiber fabric/thermoplastic polyurethane composite for improved mechanical and electromagnetic interference shielding performance

Dual conductive network enabled superhydrophobic and high performance strain sensors with outstanding electro-thermal performance and extremely high gauge factors

Achieving Excellent Thermally Conductive and Electromagnetic Shielding Performance by Nondestructive Functionalization and Oriented Arrangement of Carbon Nanotubes in Composite Films

Flexible bilayer Ti 3 C 2 T x MXene/cellulose nanocrystals/waterborne polyurethane composite film with excellent mechanical properties for electromagnetic interference shielding

Strain‐sensing behavior of flexible polypropylene/poly(ethylene‐co‐octene)/multiwalled carbon nanotube nanocomposites under cyclic tensile deformation

An Asymmetric Layer Structure Enables Robust Multifunctional Wearable Bacterial Cellulose Composite Film with Excellent Electrothermal/Photothermal and EMI Shielding Performance

Facile Design of Flexible, Strong, and Highly Conductive MXene‐Based Composite Films for Multifunctional Applications

Flexible PVDF/CNTs/Ni@CNTs Composite Films Possessing Excellent Electromagnetic Interference Shielding and Mechanical Properties under Heat Treatment