Abstract:Design of photocatalyst materials for hydrogen production is of great interest due to a lack of cost-effective candidates. Titanium dioxide (TiO 2 ) is a well-known photocatalyst with good stability, reasonable photoactivity, and low cost. To improve the efficiency and selectivity, we apply a surface modification approaches using nanostructured Cerium dioxide (CeO 2 ) deposited onto TiO 2 by atomic layer deposition (ALD). The deposition of CeO 2 onto TiO 2 uses the precursor Tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)cerium (IV) (Ce(TMHD) 4 ) and co-reactant ozone. The atomic layer deposition (ALD) of CeO 2 on TiO 2 was carried out by experiments with an atmospheric pressure fluidized bed ALD reactor. The TiO 2 substrate was pre-treated using a combination of ozone and humidified nitrogen flow pulses to investigate the effect of the increase of surface functional groups on CeO 2 deposition. The physicochemical properties of the obtained CeO 2 /TiO 2 photocatalysts were characterized using different methods and their photocatalytic activity was evaluated during photocatalytic hydrogen evolution reaction. We have also performed density functional theory (DFT) calculations to investigate the reaction mechanism of metal precursors Ce(TMHD) 4 and tris(methylcyclopentadienyl)cerium (III) (Ce(MeCp) 3 ) on hydroxylated rutile and anatase TiO 2 surfaces. The hydroxyl saturation coverage on different TiO 2 facets was first addressed. These facets include anatase a-TiO 2 (001) and a-TiO 2 (101) and rutile r-TiO 2 (100) and r-TiO 2 (110). Hydroxyl groups OH and H are initially binding to surface Ti and O atoms, respectively. On a-TiO 2 (001) hydroxyl recombination to form water results in a final coverage of 0.81ML, due to the shortest neighboring HO-H distance on all surfaces. The Gibbs energy is then calculated to elucidate the effect of pressure and temperature on the hydroxylated termination of TiO 2 surfaces. The final hydroxyl coverage is as follows: 0.81ML on a-TiO 2 (001) surface, 1ML on a-TiO 2 (101) and r-TiO 2 (100) surfaces, and 0.75ML on r-TiO 2 (110) surface. Two precursors (Ce(TMHD) 4 and Ce(MeCp) 3 ) are adsorbed on hydroxylated TiO 2 surfaces. After precursor adsorption and relaxation, the surface hydroxyl coverage changes with water formation. After Ce(THMD) 4 adsorbed on r-TiO 2 (100) surface, the hydroxyl coverage is decreased from 1ML to 0.25ML with 12 H 2 O molecules formation. After Ce(MeCp) 3 adsorbed on a-TiO 2 (101) surface, although the hydroxyl coverage is not changed, the hydroxyl orientation is modified, breaking the symmetry. For Ce(TMHD) 4 , direct ligand dissociation is applied to study the mechanism of eliminating the ligands. For Ce(MeCp) 3 , the ligand can be eliminated by hydrogen transfer. The barrier for hydrogen transfer is calculated using climbing image nudged elastic band (CI-NEB) method. The results show that for Ce(MeCp) 3 , the reaction is endothermic on a-TiO 2 (101) surface, but it is overall exothermic on the other three surfaces. The facets play an important role in the eliminating the ligand. We present DFT results on the activity of ceria-modified rutile TiO 2 towards water dissociation and CO 2 activation showing that this heterostructured catalyst can promote both reactions. This work will be important to reveal the mechanism and feasibility of atomic layer deposition of ceria on different TiO 2 surface facets.

Cerium dioxide as a photocatalyst for water decomposition to O2 in the presence of Ceaq4+ and Feaq3+ species

Insights into the Synergistic Effect of Fe and Ce in Fenton-like Reactions Catalyzed by Chitosan/feooh/ceo2 Microspheres

Γ-Al2o3 Doped with Cerium to Enhance Electron Transfer in Catalytic Ozonation of Phenol

Enhanced photocatalytic performance by regulating the Ce3+/Ce4+ ratio in cerium dioxide

Synthesis of novel CoOx decorated CeO2 hollow structures with an enhanced photocatalytic water oxidation performance under visible light irradiation

Surface Modification of Hematite Photoanodes with CeOx Cocatalyst for Improved Photoelectrochemical Water Oxidation Kinetics

Synergistic Effects of Cu2O-decorated CeO2 on Photocatalytic CO2 Reduction: Surface Lewis Acid/base and Oxygen Defect

The Role of Ceria in a Hybrid Catalyst Toward Alkaline Water Oxidation.

Sacrificial Reagent Free Photocatalytic Oxygen Evolution over CeF 3 /α‐FeOOH Nanohybrid

Co2 Photoreduction with H2o Vapor on Highly Dispersed Ceo2/Tio2 Catalysts: Surface Species and Their Reactivity

CeO2‐Accelerated Surface Reconstruction of CoSe2 Nanoneedle Forms Active CeO2@CoOOH Interface to Boost Oxygen Evolution Reaction for Water Splitting

DFT Study on Atomic Layer Deposition of Cerium Dioxide on Hydroxylated Titanium Dioxide As Efficient Photocatalyst

Enhanced Catalytic Degradation of AO7 in the CeO2–H2O2 System with Fe3+ Doping

Remediation of recalcitrant pollutants in water solution using visible light responsive cerium-doped tungsten trioxide nanoparticles

Multi-hollow Spherical CeO_2 Activates Persulfate for Heterogeneous Degradation of Organics

Cerium Dioxide As an Electron Buffer to Stabilize Iridium for Efficient Water Electrolysis

Visible light photocatalytic decomposition of organic dye and biodegradation-resistant antibiotic pollutants using cerium-doped tungsten trioxide nanoparticles

Preparation of High-Purityand White CeO_2 by Complex-Precipitation Method and Its Photocatalytic Activit

Role of Oxygen Vacancies in Photocatalytic Water Oxidation on Ceria Oxide: Experiment and DFT Studies

Innovatively-synthesized CeO2/ZnO photocatalysts by sono-photochemical deposition: catalyst characterization and effect of operational parameters on high efficient dye removal

A review on cerium-containing electrocatalysts for oxygen evolution reaction