Abstract:Abstract With the rapid development of unmanned aerial vehicle (UAV) technology, there are more and more fields of UAV application. This research mainly discusses the UAV patrol path planning based on machine vision and multi-sensor fusion. This article studies how to apply ultrasonic, a classic ranging sensor, to obstacle avoidance of UAVs. The designed ultrasonic obstacle avoidance system is a complete set of hardware and software systems. The hardware part consists of a forward ultrasonic module and a central signal processing module. Among them, a single-axis stabilization gimbal is designed for the forward ultrasonic module, which decouples the attitude angle of the UAV and the pitch detection angle of the ultrasonic sensor. In the central signal processing module, Kalman filtering is performed on the ultrasonic data in the four directions of front, rear, left, right, and left, and the obstacle avoidance control signal is sent to the flight controller according to the filtered sensor data. At the same time, a human–computer interaction interface is also designed to set various parameters of the obstacle avoidance system. For the route planning method of the tower, the routine steps are used to inspect the tower with a single-circuit line, and the specific targets are the insulator string, the ground wire, and the conductor. In this study, the average statistical result of the straight-line distance of the UAV patrolling 100 m is 99.80 m, and the error is only 0.2%. The fusion obstacle avoidance control method based on machine vision is suitable for the engineering application of UAV perception obstacle avoidance. The obstacle avoidance method adopted in this article can be extended to most flight control platforms, and it is a control method with broad application prospects.

Research on the Intelligent Obstacle Avoidance and Path Planning Strategy of UAV based on Multi-Sensor Fusion

Onboard Distributed Trajectory Planning Through Intelligent Search for Multi-UAV Cooperative Flight

A Study on Path Planning Algorithms of UAV Collision Avoidance

UAV patrol path planning based on machine vision and multi-sensor fusion

Path Planning for Fixed-Wing UAVs Based on Expert Knowledge and Improved VFH in Cluttered Environments

Autonomous aerial obstacle avoidance using LiDAR sensor fusion

Autonomous Obstacle Avoidance for UAV Based on Fusion of Radar and Monocular Camera

Multi-source Information Fusion for Sense and Avoidance of UAV

Cooperative Sensing Enhanced UAV Path-Following and Obstacle Avoidance with Variable Formation

Multi-obstacle Path Planning of UAV Based on Improved Ant Colony System Algorithm

Semantic Information Based Path Planning for Cooperative UAV Systems

Research on Obstacle Avoidance Algorithm for Unmanned Ground Vehicle Based on Multi-Sensor Information Fusion.

Design and Implementation of UAV Obstacle Avoidance System

EF-TTOA: Development of a UAV Path Planner and Obstacle Avoidance Control Framework for Static and Moving Obstacles

Research on UAV Dynamic Target Tracking with Multi-sensor Position Feedback.

Obstacle Detection And Tracking Based On Multi-Sensor Fusion

An Integrated UWB-IMU-Vision Framework for Autonomous Approaching and Landing of UAVs

A Safer Vision-based Autonomous Planning System for Quadrotor UAVs with Dynamic Obstacle Trajectory Prediction and Its Application with LLMs

Intelligent Path Planning and Following for UAVs in Forest Surveillance and Fire Fighting Missions

UAV Low-Altitude Obstacle Detection Based on the Fusion of LiDAR and Camera

Formation Flight Control and Cooperative Obstacle Avoidance of Multiple UAVs