Abstract:Voltage step-down converters are very popular in distributed power systems, voltage regular modules, electric vehicles, etc. However, a high step-down voltage ratio is required in many applications to prevent the traditional buck converter from operating at extreme duty cycles. In this paper, a series capacitor interleaved buck converter with a soft switching technique is proposed. The DC voltage ratio of the proposed converter is half that of the traditional buck converter and the voltage stress across the one main switch and the diodes is reduced. Moreover, by paralleling the series connected auxiliary switch and the auxiliary inductor with the main inductor, zero voltage transition (ZVT) of the main switches can be obtained without increasing the voltage or current stress of the main power switches. In addition, zero current turned-on and zero current switching (ZCS) of the auxiliary switches can be achieved. Furthermore, owing to the presence of the auxiliary inductor, the turned-off rate of the output diodes can be limited and the reverse-recovery switching losses of the diodes can be reduced. Thus, the efficiency of the proposed converter can be improved. The DC voltage gain ratio, soft switching conditions and a design guideline for the critical parameters are given in this paper. A loss analysis of the proposed converter is shown to demonstrate its advantages over traditional converter topologies. Finally, experimental results obtained from a 100V/10V prototype are presented to verify the analysis of the proposed converter.

Capacitive Power Transfer With Series-Parallel Compensation for Step-Up Voltage Output

Improved High Step-Up Dc-Dc Converter Based on Active Clamp Coupled Inductor with Voltage Double Cells

A Capacitive Power Transfer System Designed for Stable Outputs with Load Variations

A Nonmonotonic Parameter Design Approach for Compact Capacitive Power Transfer

Applying Diode-Capacitor Voltage Multiplier to Coupled-Inductor Boost Converter for Novel DC-DC Converter with High Voltage Gain and Low Voltage Stress

High Step-Up/Down Switched-Capacitor Based Bidirectional DC-DC Converter

A High-Efficiency 12/1-V Dual-Path Series-Capacitor Converter with Low $v\cdot A$ Metric and Full Duty Range

A 36-55 V Input 0.6-2.5 V Output Bypass-Assist Series-Capacitor Power Converter with 93.1% Peak Efficiency and 1.5 Ma-5 A Load Range.

Flying-Capacitor Based Hybrid LLC Converters with Input Voltage Auto-Balance Ability for High Voltage Applications

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

A High Step-Up DC-DC Converter with Intermediate Capacitor and Coupled Inductors

A Step-up Series-parallel Resonant Switched-capacitor Converter with Extended Line Regulation Range

3.5-kW 94.2% DC–DC Efficiency Capacitive Power Transfer With Zero Reactive Power Circulating

High Step-Up DC-DC Converter Based on Multi-Cell Diode-Capacitor Network and Coupling Inductor

A Single-Switch High Step-Up DC–DC Converter Based on Three-Winding Coupled Inductor and Pump Capacitor Unit

ZVT Series Capacitor Interleaved Buck Converter with High Step-Down Conversion Ratio

High Step-up DC/DC Converter Based on Switched Inductor and Switched Capacitor Unit

Synchronous Dual-Switch Ultrahigh Step-up DC-DC Converter Based on Coupled Inductor and Voltage Multiplier for Photovoltaic Systems

Design of CPT System With Multiple Constant Output Voltage Pickups Using Inverse Hybrid Parameters of Capacitive Coupler

A Circuit Design Method for Constant Voltage Output With Zero Phase Angle and Minimum Coupler Voltages in Capacitive Power Transfer

Soft Switching High Step-Down Series-Capacitor Based Converter with Coupled-Inductor Technique