Abstract:With the advantages of high specific energy and high theoretical capacity, lithium‐sulfur batteries are gaining attention in the field of energy storage. However, there are still many difficulties in the practical application. Such as poor electrical conductivity of sulfur, large volume expansion of sulfur, shuttle effect of polysulfide, resulting in rapid capacity decay and poor cycling stability. To solve these problems, in this paper, nitrogen-doped carbon nanotube and layer less montmorillonite composites (NMMT/CNT/S) were prepared by a simple hydrothermal method and used as sulfur carriers for lithium‐sulfur batteries. Due to the high conductivity of carbon nanotubes, the high specific surface area and large number of adsorption sites in montmorillonite, and the ability of nitrogen to increase electrochemical reactivity, the obtained NMMT/CNT/S has excellent electrochemical performance: Initial discharge capacity up to 1122 mAh/g at a current density of 0.5C, initial specific capacity of 1017 mAh/g at a current density of 1C, capacity remaining after 100 cycles 815 mAh/g, the capacity retention rate is 80.1 %. The prepared NMMT/CNT/S cathode material has good magnification performance, at current densities of 0.2, 0.5, 1, 2 and 4C, the average specific capacity was 1085.9, 902.2, 820.4, 681.2 and 526.4 mAh/g, respectively. The initial specific capacity of NMMT/CNT/S at a current density of 2C is 698 mAh/g, capacity remaining 542 mAh/g after 500 cycles of stabilization, with a capacity retention rate of 77.7 %. These results show that the prepared NMMT/CNT/S is a breakthrough development in the application of lithium‐sulfur batteries.

Nitrogen doped multistage porous carbon for enhancing the adsorption-catalytic conversion of polysulfides in Li–S batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Coupling highly dispersed Sb2S3 nanodots with nitrogen/sulfur dual-doped porous carbon nanosheets for efficient immobilization and catalysis of polysulfides conversion

Reduced porous carbon/N-doped graphene nanocomposites for accelerated conversion and effective immobilization of lithium polysulfides in lithium-sulfur batteries

Highly active CoP-Co2N confined in nanocarbon enabling efficient electrocatalytic immobilizing-conversion of polysulfide targeting high-rate lithium-sulfur batteries

Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

High-Entropy Metal Nitride Embedded in Concave Porous Carbon Enabling Polysulfide Conversion in Lithium-Sulfur Batteries

MnO Modified Porous Carbon with Improved Adsorption Capability and Promoted Redox Kinetics in Lithium‐Sulfur Batteries

Activating redox kinetics of polysulfides within edge-rich nitrogen doped porous interconnected carbon nanosphere

g-C3N4/Macroporous Carbon Composite with High Polysulfide Adsorption Capability and Its Application in Lithium-Sulfur Battery

Catalytic Mo2C decorated N-doped honeycomb-like carbon network for high stable lithium-sulfur batteries

Construct a porous carbon structure 3D-NOPC doped with N and O as the sulfur main body for durable lithium-sulfur batteries

Nitrogen-doped nanotubes and few-layer montmorillonite composites as an effective polysulfides adsorbent for lithium–sulfur batteries

Nitrogen doped hollow carbon nanospheres as efficient polysulfide restricted layer on commercial separators for high-performance lithium-sulfur batteries