Abstract:IntroductionMRI has been increasingly used in radiation therapy to facilitate tumor and organ delineation and assess treatment response. Diffusion MRI can provide cellularity information and may enable functional‐based treatment planning and adaptation. However, strong distortion associated with the conventional diffusion‐weighted single‐shot echo‐planar imaging (DW‐ssEPI) sequence is problematic for accurate target delineation. The goal of this work is to propose a 3D diffusion sequence with minimal distortion for radiation therapy applications.MethodsA 3D diffusion‐prepared magnitude‐stabilized balanced steady‐state free precession sequence (DP‐MS‐bSSFP) was developed. A 2D navigator was acquired during the linear catalyzation stage of the bSSFP readout to estimate the phase, which was then used in a plane‐by‐plane low‐rank constrained reconstruction to correct the shot‐to‐shot k‐space inconsistency. A diffusion phantom was scanned to evaluate and compare the geometric reliability and apparent diffusion coefficient (ADC) accuracy with the conventional DW‐ssEPI. Eight landmarks were selected on each slice of the images to calculate the target registration error (TRE), which was used as a surrogate for geometric fidelity. The phantom was scanned under both 0℃ and room temperature. Brain scans were performed on five healthy volunteers. In the first volunteer, protocols of 1, 2, and 4 shots per Kz plane were compared. In vivo geometric fidelity and ADC accuracy were evaluated on the remaining four volunteers using the protocol of four shots per Kz plane. In the geometric fidelity study, 8–10 landmarks were picked on each slice to calculate the TRE. Regions of interest were placed on the white matter, the cerebellum, and the cerebrospinal fluid region to evaluate the ADC agreement between DW‐ssEPI and DP‐MS using the Bland‐Altman plot. All scans were performed at 1.5 mm isotropic resolution to meet the high‐resolution requirement of many radiotherapy applications.ResultsThe DP‐MS had drastically improved geometric accuracy compared with DW‐ssEPI on the phantom. The mean TRE decreased from 2.09 mm to 0.70 mm. The percentage difference of the ADC values between the two diffusion sequences were less than 5.5% and 7% for the 0℃ and room temperature study, respectively. The DW‐ssEPI had strong distortion and susceptibility‐related artifacts at tissue air boundary, whereas distortion was minimal in DP‐MS images. Overall, the mean/max TRE was over 2 mm/7 mm in the volunteers for DW‐ssEPI, whereas less than 0.8 mm/2 mm for DP‐MS. Good ADC agreement was observed for the white matter, the cerebellum, and the CSF based on the Bland‐Altman plots.ConclusionA 3D diffusion sequence was developed and validated. It provided high‐resolution diffusion imaging with mean distortion less than 1 mm at 1.5 T, and is a promising imaging technique for treatment planning and adaptive radiotherapy.

Single breath‐hold volumetric lung imaging at 0.55T using stack‐of‐spiral (SoS) out‐in balanced SSFP

Reduced Field of View Single‐shot Spiral Perfusion Imaging

Rotated spiral RARE for high spatial and temporal resolution volumetric arterial spin labeling acquisition

Reduced Field-of-view Stack-of-spirals Enables High Spatiotemporal Resolution 3D Perfusion Imaging

Optimizing Clinical Cardiac MRI Workflow Through Single Breath-Hold Compressed Sensing Cine: an Evaluation of Feasibility and Efficiency

Cardiac Balanced Steady-State Free Precession MRI at 0.35 T: a Comparison Study with 1.5 T.

3D Isotropic Resolution Diffusion-Prepared Magnitude-Stabilized Bssfp Imaging with High Geometric Fidelity at 1.5 Tesla

Volumetric abdominal perfusion measurement using a pseudo-randomly sampled 3D fast-spin-echo (FSE) arterial spin labeling (ASL) sequence and compressed sensing reconstruction.

Submillimeter lung MRI at 0.55 T using balanced steady-state free precession with half-radial dual-echo readout (bSTAR)

Free-breathing liver fat quantification using a multiecho 3D stack-of-radial technique.

Improved abdominal T1 weighted imaging at 0.55T

Submillimeter balanced SSFP BOLD–functional MRI accelerated with 3D stack‐of‐spirals at 9.4 T

Free-breathing half-radial dual-echo balanced steady-state free precession thoracic imaging with wobbling Archimedean spiral pole trajectories

Increasing the scan‐efficiency of pulmonary imaging at 0.55 T using iterative concomitant field and motion‐corrected reconstruction

Balanced steady-state free precession thoracic imaging with half-radial dual-echo readout on smoothly interleaved archimedean spirals

Single Breath‐hold Three‐dimensional Whole‐heart T2 Mapping with Low‐rank Plus Sparse Reconstruction

Free‐breathing 3D whole‐heart joint T1/T2 mapping and water/fat imaging at 0.55 T

Real-time assessment of right and left ventricular volumes and function in children using high spatiotemporal resolution spiral bSSFP with compressed sensing

Breath-hold imaging of the coronary arteries using Quiescent-Interval Slice-Selective (QISS) magnetic resonance angiography: pilot study at 1.5 Tesla and 3 Tesla

Analytical corrections for B1‐inhomogeneity and signal decay in multi‐slice 2D spiral hyperpolarized 129Xe MRI using keyhole reconstruction

Feasibility of dynamic T2 *-based oxygen-enhanced lung MRI at 3T