Abstract:Carbon fibers have promising applications in the efficient transmission of electric power with less resource consumption. Laser graphitization of the mesophase pitch-based carbon fiber (MPCF) was proposed to improve the electrical conductivity of the carbon fiber. The obtained MPCF showed a high conductivity of 7.04 × 105 S/m. The graphitization degree of carbon fiber increased and the interlayer spacing of its graphite crystal decreased on increasing the laser intensity. With a laser power of 360 W and an irradiation period of 25 s, corresponding to a temperature of 3001 °C, a high graphitization degree (R = 0.02) was obtained and the interlayer spacing was as small as 0.338 nm, close to that of pure graphitic carbon (0.335 nm). The enhanced electrical conductivity is attributed to the improved homogeneity of graphitization along the axial and radial directions, the ordered structural evolution, ordered stacking of the graphitic layer, and the promoted connectivity between the graphitic crystals in the carbon fiber. The energy consumption of the proposed method is estimated to be only 0.46% of that with the conventional Joule heating approach. This work suggests that laser-induced graphitization is a good alternative to prepare carbon fibers with high electrical conductivity and reduced energy consumption.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02454?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02454</a>.Diameter of carbon fiber samples; diameter distribution of the carbon fiber sample; and the interlayer spacing (d10) of carbon fiber samples (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02454/suppl_file/sc0c02454_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The paper attempts to address the issue of improving the electrical conductivity of carbon fibers to achieve efficient and low-resource-consuming power transmission. Specifically, the researchers used laser irradiation to graphitize mesophase pitch-based carbon fibers (MPCF) to enhance their electrical conductivity. The paper explores the effect of laser irradiation intensity on the degree of graphitization and electrical conductivity of carbon fibers and analyzes the changes in the microstructure of carbon fibers during the graphitization process. ### Main Issues: 1. **Improving the electrical conductivity of carbon fibers**: The current electrical conductivity of carbon fibers is much lower than that of metallic materials, limiting their application in power transmission. The paper aims to enhance the electrical conductivity of carbon fibers through laser irradiation, making it comparable to or even surpassing the level of existing high-conductivity carbon fibers. 2. **Reducing energy consumption**: Traditional graphitization methods require extremely high temperatures (around 3000°C), which not only consume a lot of energy but also cause environmental pollution. The paper proposes a more energy-efficient and environmentally friendly laser irradiation method, significantly reducing the energy consumption of graphitization. 3. **Optimizing microstructure**: By using laser irradiation, the microstructure of carbon fibers is improved, increasing the degree of graphitization and thereby enhancing electrical conductivity. The paper provides a detailed analysis of the impact of laser irradiation on the microstructure of carbon fibers, including the orderly arrangement of graphite layers and the reduction of defects. ### Solutions: - **Laser Irradiation**: By using laser irradiation with different power levels, carbon fibers can reach high temperatures in a short time, achieving efficient graphitization. - **Experimental Verification**: Techniques such as Raman spectroscopy, X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM) were used to systematically analyze the impact of laser irradiation on the electrical conductivity and microstructure of carbon fibers. - **Performance Evaluation**: The paper compares the performance of laser-irradiated carbon fibers with those prepared by traditional methods in terms of electrical conductivity, thermal conductivity, density, and other properties, validating the effectiveness and superiority of the new method. ### Conclusion: Through the laser irradiation method, the electrical conductivity of carbon fibers is significantly improved, reaching 7.04 × 10^5 S/m, which is close to the level of pure graphite. At the same time, the energy consumption of the laser irradiation method is only 0.46% of that of the traditional Joule heating method, showing great energy-saving potential. This research provides new insights for the efficient and low-energy production of carbon fibers.

Carbon Fibers with High Electrical Conductivity: Laser Irradiation of Mesophase Pitch Filaments Obtains High Graphitization Degree

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Microstructure of high thermal conductivity mesophase pitch-based carbon fibers

Carbon Welding by Ultrafast Joule Heating.

Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.

High thermal-conductivity mesophase pitch-based graphite fiber with circular cross-section through a spinneret with a Y-shaped spinning hole

In Situ Growth of Graphene on Carbon Fibers to Enhance the Mechanical and Thermal Conductivity of Epoxy Composites

Wet-Spinning of Continuous Montmorillonite-Graphene Fibers for Fire-Resistant Lightweight Conductors

Highly Strong and Conductive Carbon Fibers Originated from Bioinspired Lignin/Nanocellulose Precursors Obtained by Flow-Assisted Alignment and In Situ Interfacial Complexation

Graphitisation of Waste Carbon Powder with Femtosecond Laser Annealing.

In-Situ Doping B4C Nanoparticles in Mesophase Pitch for Preparing Carbon Fibers with High Thermal Conductivity by Boron Catalytic Graphitization

2D-Topology-seeded Graphitization for Highly Thermally Conductive Carbon Fibers

Improving the mechanical properties and thermal conductivity of mesophase-pitch-based carbon fibers by controlling the temperature in industrial spinning equipment

Influence of carbon fibers on interfacial bonding properties of copper-coated carbon fibers

Highly conductive and porous lignin-derived carbon fibers

Preparation and Characterization of Large Diameter Pitchbased Carbon Fiber/abs Resin Composites with High Thermal Conductivities

Fabrication and Study on Thermal Conductivity, Electrical Properties, and Mechanical Properties of the Lightweight Carbon/Carbon Fiber Composite

Two‐dimensional Topology‐Seeded Graphitization for Highly Thermally Conductive Carbon Fibers

A carbon-nanofiber glass composite with high electrical conductivity

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration