Abstract:Background: Ion beam therapy allows for a substantial sparing of normal tissues and higher biological efficacy. Synthetic single crystal diamond is a very good material to produce high-spatial-resolution and highly radiation hard detectors for both dosimetry and microdosimetry in ion beam therapy. Purpose: The aim of this work is the design, fabrication and test of an integrated waterproof detector based on synthetic single crystal diamond able to simultaneously perform dosimetric and microdosimetric characterization of clinical ion beams. Methods: The active elements of the integrated diamond device, that is, dosimeter and microdosimeter, were both realized in a Schottky diode configuration featured by different area, thickness, and shape by means of photolithography technologies for the selective growth of intrinsic and boron-doped CVD diamond. The cross-section of the sensitive volume of the dosimetric element is 4 mm2 and 1 μm-thick, while the microdosimetric one has an active cross-sectional area of 100 × 100 μm2 and a thickness of about 6.2 μm. The dosimetric and microdosimetric performance of the developed device was assessed at different depths in a water phantom at the MedAustron ion beam therapy facility using a monoenergetic uniformly scanned carbon ion beam of 284.7 MeV/u and proton beam of 148.7 MeV. The particle flux in the region of the microdosimeter was 6·107 cm2 /s for both irradiation fields. At each depth, dose and dose distributions in lineal energy were measured simultaneously and the dose mean lineal energy values were then calculated. Monte Carlo simulations were also carried out by using the GATE-Geant4 code to evaluate the relative dose, dose averaged linear energy transfer (LETd ), and microdosimetric spectra at various depths in water for the radiation fields used, by considering the contribution from the secondary particles generated in the ion interaction processes as well. Results: Dosimetric and microdosimetric quantities were measured by the developed prototype with relatively low noise (∼2 keV/μm). A good agreement between the measured and simulated dose profiles was found, with discrepancies in the peak to plateau ratio of about 3% and 4% for proton and carbon ion beams respectively, showing a negligible LET dependence of the dosimetric element of the device. The microdosimetric spectra were validated with Monte Carlo simulations and a good agreement between the spectra shapes and positions was found. Dose mean lineal energy values were found to be in close agreement with those reported in the literature for clinical ion beams, showing a sharp increase along the Bragg curve, being also consistent with the calculated LETd for all depths within the experimental error of 10%. Conclusions: The experimental indicate that the proposed device can allow enhanced dosimetry in particle therapy centers, where the absorbed dose measurement is implemented by the microdosimetric characterization of the radiation field, thus providing complementary results. In addition, the proposed device allows for the reduction of the experimental uncertainties associated with detector positioning and could facilitate the partial overcoming of some drawbacks related to the low sensitivity of diamond microdosimeters to low LET radiation.

Diamond energy-dispersive dosimeter for measuring linear energy deposition distributions in clinical carbon beam therapy

Diamond based integrated detection system for dosimetric and microdosimetric characterization of radiotherapy ion beams

A Highly Versatile X-ray and Electron Beam Diamond Dosimeter for Radiation Therapy and Protection

A Millimeter-scale Single Charged Particle Dosimeter for Cancer Radiotherapy

Recent progress in diamond radiation detectors

A Diamond-Based Dose-per-Pulse X-ray Detector for Radiation Therapy

A review of diamond dosimeters in advanced radiotherapy techniques

Properties of a commercial PTW-60019 synthetic diamond detector for the dosimetry of small radiotherapy beams

Nanodosimetric investigation of the track structure of therapeutic carbon ion radiation. Part 1: Measurement of ionization cluster size distributions

Monocrystalline diamond detector for online monitoring during synchrotron microbeam radiotherapy

Measurements of Linear Energy Transfer (LET) Distributions by CR-39 for a Therapeutic Carbon Ion Beam with a New 2D Ripple Filter

An Active Dose Measurement Device for Ultra-short, Ultra-intense Laser Facilities

Response of diamond detectors in ultra-high dose-per-pulse electron beams for dosimetry at FLASH radiotherapy

Evaluation of a therapeutic carbon beam using a G2000 glass scintillator

Design, realization, and characterization of a novel diamond detector prototype for FLASH radiotherapy dosimetry

Three‐dimensional radiation dosimetry of carbon ion beams using surfactant hydrogels: Fundamental investigation

Calibration of diamond detectors for dosimetry in beam-loss monitoring

Silicon substrate diamond film detector for gamma dose rate measurement in a high radiation environment

A readout system for highly sensitive diamond detectors for FLASH dosimetry

State-of-the-art silicon carbide diode dosimeters for ultra-high dose-per-pulse radiation at FLASH radiotherapy

Dosimetry of microbeam radiotherapy by flexible hydrogenated amorphous silicon detectors