Abstract:Lithium oxygen(Li-O 2 ) batteries have been recognized as one of the next-generation power sources, capable of supplying power for a long time even in an independent extreme environment. In spite of the theoretical advantage, Li-O 2 batteries face technical and economical challenges that must be addressed to promote them as commercially variable techcologies for future energy system. Above all, battery performance largely depends on the activities of the cathode during discharge and charge, respectively. The undesirable overpotential caused by sluggish reaction kinetics assiciated with the ORR and OER greatly limit the current performance of Li-O 2 batteries, which must be improved by efficient catalyzing the reactions. Among the numerous catalysts, perovskite oxides have attention for candidate electrocatalyst for Li-O 2 batteries due to their high electronic/ionic conductivity, high electrochemical stability, and catalytic activity. Especially, La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) is considered as a typical catalyst for Li-O 2 batteries, which and provide high oxygen surface exchange coefficient for fast kinetics at the gas/electrode interface. The surface area is significantly related on the ORR and OER performance, which influences on the active area for reactions. In this study, we have tried to utilize a simple high energy ball milling process to investigate the electrochemical properties of LSCF catalyst. Through the BET analysis, it was confirmed that the specific area significantly was increased after ball milling due to the reduced particle size, obtaining the optimized milling time with the higher ORR performance. The electrochemical activities have been measured with rotating disk electrode(RRDE) method. Well-ball milled LSCF catalyst has resulted in the enlargement of specific surface area and increased defective sites, which improve the catalytic activity. To investigate the influence of LSCF oxides on the ORR process, the performance of composite electrode with LSCF catalyst in LITFSI in either solvents has been compared with a carbon based cathode(carbon nano tube(CM130)). From the discharge results, the composite electrode showed the superior performance as well as higher specific capacitance (more than 1.6 times) than carbon based electrode dye to the altered transport and reaction kinetics due to LSCF. In this study, we have proposed the processes of obtaining a catalyst with optimal electrochemical properties through a relatively simple process and applied it to electrode for lithium oxygen batteries.

Solid-State Ball-Milling of Co3O4 Nano/Microspheres and Carbon Black Endorsed LaMnO3 Perovskite Catalyst for Bifunctional Oxygen Electrocatalysis

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Perovskite Sr0.9Y0.1CoO3-delta Nanorods Modified with CoO Nanoparticles as a Bifunctional Catalyst for Rechargeable Li-O-2 Batteries

In-situ fabrication of cobalt sulfide decorated N, S co-doped mesoporous carbon and its application as electrocatalyst for efficient oxygen reduction reaction

Graphene Nanosheet-Wrapped Mesoporous La0.8Ce0.2Fe0.5Mn0.5O3 Perovskite Oxide Composite for Improved Oxygen Reaction Electro-Kinetics and Li-O2 Battery Application

La0.8Sr0.2Mn0.8Co0.2O3-δ perovskite as an efficient functional electrocatalyst for oxygen reduction reactions

Direct pyrolysis and ultrasound assisted preparation of N, S co-doped graphene/Fe3C nanocomposite as an efficient electrocatalyst for oxygen reduction and oxygen evolution reactions

Excellent Bifunctional Oxygen Evolution and Reduction Electrocatalysts (5A1/5)Co2O4 and Their Tunability

Regulating the Interfacial Electron Density of La 0.8 Sr 0.2 Mn 0.5 Co 0.5 O 3 /RuO x for Efficient and Low-Cost Bifunctional Oxygen Electrocatalysts and Rechargeable Zn-Air Batteries

Designed preparation of CoS/Co/MoC nanoparticles incorporated in N and S dual-doped porous carbon nanofibers for high-performance Zn-air batteries

Cobalt-Doped Perovskite-Type Oxide LaMnO3 as Bifunctional Oxygen Catalysts for Hybrid Lithium-Oxygen Batteries

N-doped porous carbon nanofibers inlaid with hollow Co3O4 nanoparticles as an efficient bifunctional catalyst for rechargeable Li-O2 batteries

Hierarchical Mesoporous NiO/MnO 2 @PANI Core-Shell Microspheres, Highly Efficient and Stable Bifunctional Electrocatalysts for Oxygen Evolution and Reduction Reactions.

Single-atomic Mn sites coupled with Fe 3 C nanoparticles encapsulated in carbon matrixes derived from bimetallic Mn/Fe polyphthalocyanine conjugated polymer networks for accelerating electrocatalytic oxygen reduction

Interfacial Electronic Structure Modulation of Hierarchical Co(OH)F/CuCo2S4 Nanocatalyst for Enhanced Electrocatalysis and Zn-Air Batteries Performances

Effect of varying percentages of Co3O4 Nanoparticles on the Behavior of (ORR/OER) Bifunctional Co3O4/α-MnO2 Electrocatalyst

Superior bifunctional oxygen electrocatalysts based on Co 2 MnO 4 with mixed site occupancy, Mn-rich surfaces and twin defects

MOF-Derived Three-Dimensional Porous Dodecahedral Structured Bimetallic Mn/Co-C-N Composite for High-Performance Durable Oxygen Reduction Reaction Electrocatalysts

Study on the Effect of Surface Area on the ORR Performance of Perovskite Catalyst for High Performance Lithium-Oxygen Batteries

Sm0.5Sr0.5Co1−xNixO3−δ—A Novel Bifunctional Electrocatalyst for Oxygen Reduction/Evolution Reactions

Enhanced Lanthanum-Stabilized Low Crystallinity Metal Oxide Electrocatalysts with Superior Activity for Oxygen Reactions