Abstract:The development of structural energy-storage materials is critical for the lightweighting and space utilization of electric vehicles and aircrafts. However, a structural electrolyte suitable for structural energy devices is rarely exploited. Here, a structural lithium battery composed of a fiber-reinforced structural electrolyte and a structural cathode is demonstrated. Benefitting from poly(ethylene oxide)–lithium bis(trifluoromethane)sulfonimide (PEO-LiTFSI) as the polymer electrolyte matrix and lithium aluminum titanium phosphate (LATP) and glass fiber (GF) as reinforcement fillers, the LATP-GF/PEO-LiTFSI composite electrolyte developed offers a high tensile strength of 33.1 MPa, large Li+ transfer number of 0.37, moderate ionic conductivity of 6.3 × 10–5 S cm–1 (at 25 °C), wide electrochemical window of 4.4 V, and high effectiveness in suppression of lithium dendrite growth. Finally, a structural lithium battery is demonstrated with acidified carbon fibers (ACFs) as the cathode, Li as the anode, and LATP-GF/PEO-LiTFSI as the electrolyte, which shows an ultrahigh tensile strength of 124.2 MPa and a moderate capacity of 1.45 mAh cm–2. Importantly, the ACF|LATP-GF/PEO-LiTFSI|Li cell can properly function under a high compressive stress of 11.26 MPa. It is believed that the design strategy with a fiber-reinforced polymer as the structural electrolyte and a carbon fiber woven fabric as the structural electrode is feasible to obtain high-performance structural energy-storage components.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00402?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00402</a>.XRD patterns of LATP powders and LATP-GF/PEO-LiTFSI composite, SEM image of the cross section of LATP-GF/PEO-LiTFSI, EDAX pattern of LATP particles embedded in LATP-GF/PEO-LiTFSI, S 2p and N 1s core level XPS spectra for desized CF and ACF, XPS spectra of CF and ACF, EIS of SS symmetric cells with electrolytes at different temperatures, ionic conductivities of electrolytes at various temperatures from 25 to 80 °C, LSV curves and current–time curves of GF/PEO-LiTFSI and LATP/PEO-LiTFSI, tLi+ and ionic conductivities of different electrolytes at 25 °C, compression test of the ACF|LATP-GF/PEO-LiTFSI|Li cell encapsulated with a glass fiber-reinforced epoxy, ID/IG values and average atomic percentages of C, N, O, and S on the surfaces of CF and ACF, relative surface concentrations (%) of C, N, O, and S species obtained by fitting the C 1s, N 1s, O 1s, and S 2p core levels, respectively, in XPS spectra, and comparison of ionic conductivity and tensile strength of solid electrolytes reported in the literature and this work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00402/suppl_file/ae1c00402_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

LiDFOB-based multifunctional electrolyte-enabled high cycling stability and rate capability of solid-state batteries for composite structural batteries

Quasi‐Solid Composite Polymer Electrolyte‐Based Structural Batteries with High Ionic Conductivity and Excellent Mechanical Properties

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

High-Strength Poly(ethylene oxide) Composite Electrolyte Reinforced with Glass Fiber and Ceramic Electrolyte Simultaneously for Structural Energy Storage

Designing a Refined Multi‐Structural Polymer Electrolyte Framework for Highly Stable Lithium‐Metal Batteries

Flexible Composite Electrolyte Membranes with Fast Ion Transport Channels for Solid-State Lithium Batteries

Hexagonal Rodlike Cu-MOF-74-Derived Filler-Reinforced Composite Polymer Electrolyte for High-Performance Solid-State Lithium Batteries

Structural Positive Electrodes Engineered for Multifunctionality

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Lithium iron phosphate cathode supported solid lithium batteries with dual composite solid electrolytes enabling high energy density and stable cyclability

Metal Organic Frameworks Enabled Multifunctional Poly(ethylene oxide)-Based Solid Polymer Electrolytes with High Lithium-Ion Conductivity and Excellent Stability

A Carbon Fiber Lamina Electrode Based on Macroporous Epoxy with Vertical Ion Channels for Structural Battery Composites

Flexible solid-state electrolyte based on comb-like PEG-functionalized covalent organic frameworks for lithium metal batteries

Multiple Dynamic Bonds‐Driven Integrated Cathode/Polymer Electrolyte for Stable All‐Solid‐State Lithium Metal Batteries

Asymmetric organic-inorganic bi-functional composite solid-state electrolyte for long stable cycling of high-voltage lithium battery

Metal-organic Framework (Mof)-Incorporated Polymeric Electrolyte Realizing Fast Lithium-Ion Transportation with High Li+ Transference Number for Solid-State Batteries

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

Toward robust solid-state lithium metal batteries by stabilizing a polyethylene oxide-based solid electrolyte interface with a biomass polymer filler

Highly crystalline vinylene-linked covalent organic frameworks enhanced solid polycarbonate electrolyte for dendrite-free solid lithium metal batteries

Short carbon fiber reinforced epoxy-ionic liquid electrolyte enabled structural battery via vacuum bagging process

Porous structural battery composite for coordinated integration of mechanical and electrical functionalities