Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

Enhanced performance of hybrid piezo/triboelectric using BaTiO3/polymer composite film modified with rGO

rGO-Embedded Polymer Nanocomposite Layer for Improved Performance of Triboelectric Nanogenerator

Enhanced Power Generation by Piezoelectric P(VDF-TrFE)/rGO Nanocomposite Thin Film

Morphotropic phase boundary-based BaTi0.89Sn0.11O3 filler induced polarization tuned P(VDF-TrFE) composites as efficient piezo-tribo hybrid nanogenerators

Synthesis of a nitrogen doped reduced graphene oxide based ceramic polymer composite nanofiber film for wearable device applications

In-situ amino-functionalized and reduced graphene oxide/polyimide composite films for high-performance triboelectric nanogenerator

Tuning the space charge polarization of PVDF based ternary composite for piezo-tribo hybrid energy harvesting

Coupling Enhanced Performance of Triboelectric–Piezoelectric Hybrid Nanogenerator Based on Nanoporous Film of Poly(vinylidene fluoride)/BaTiO 3 Composite Electrospun Fibers

Synergetic Effects of Amino‐Functionalized Reduced Graphene Oxide And Barium Strontium Titanate Pillars on Enhancing Triboelectric Performance (Adv. Sustainable Syst. 1/2024)

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Scalable piezoelectric energy harvesting from PVDF-HFP/BZT-BCT/GO hybrid composite film

Remarkably enhanced hybrid piezo/triboelectric nanogenerator via rational modulation of piezoelectric and dielectric properties for self-powered electronics

Wearable piezoelectric nanogenerators based on reduced graphene oxide and in situ polarization-enhanced PVDF-TrFE films

Electromechanical Performance and Figure of Merit Optimization for Flexible Lead-Free PDMS- BaTiO 3 Piezocomposites

High-performance flexible lead-free piezo-antiferroelectric based on NaNbO3/PDMS composites for energy harvesting application

Coupling Enhanced Performance of Triboelectric–Piezoelectric Hybrid Nanogenerator Based on Nanoporous Film of Poly(vinylidene Fluoride)/batio3 Composite Electrospun Fibers

Enhanced piezoelectric performance of multi-layered flexible polyvinylidene fluoride–BaTiO3–rGO films for monitoring human body motions

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

Enhancement of piezoelectric energy-harvesting capacity of electrospun β-PVDF nanogenerators by adding GO and rGO

The construction of BaTiO 3 -based core-shell composites for high-performance and flexible piezoelectric nanogenerators