Abstract:The maglev linear motor has three degrees of motion freedom, which are respectively realized by the thrust force in the x-axis, the levitation force in the z-axis and the torque around the y-axis. Both the thrust force and levitation force can be seen as the sum of the forces on the three windings. The resultant thrust force and resultant levitation force are independently controlled by d-axis current and q-axis current respectively. Thus, the commonly used dq transformation control strategy is suitable for realizing the control of the resultant force, either thrust force and levitation force. However, the forces on the three windings also generate additional torque because they do not pass the mover mass center. To realize the maglev system high-precision control, a maglev linear motor with a new structure is proposed in this paper to decrease this torque. First, the electromagnetic model of the motor can be deduced through the Lorenz force formula. Second, the analytic method and finite element method are used to explore the reason of this additional torque and what factors affect its change trend. Furthermore, a maglev linear motor with a new structure is proposed, with two sets of 90 degrees shifted winding designed on the mover. Under such a structure, the mover position dependent periodic part of the additional torque can be offset. Finally, the theoretical analysis is validated by the simulation result that the additionally generated rotating torque can be offset with little fluctuation in the proposed new-structure maglev linear motor. Moreover, the control system is built in MATLAB/Simulink, which shows that it has small thrust ripple and high-precision performance.

A 6-DOF Extended Unified Wrench Model for Maglev Planar Motor

Modeling of a Six-Degree-of-freedom Magnetic Levitation Platform Actuated by Noncontact Lorentz Forces

Extended Unified Wrench Model Suitable for the End Effect of the Ironless Permanent Magnet Planar Motor

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Unified wrench model of an ironless permanent magnet planar motor with 2D periodic magnetic field

A Real-Time Computation Model of the Electromagnetic Force and Torque for a Maglev Planar Motor with the Concentric Winding

Model and Simulation of Magnetic Levitation Planar Motor

Performance Evaluation of the Wrench Models of Ironless Permanent Magnet Planar Motor with Different Simplifications

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Design of A Control System for A Maglev Planar Motor Based on Two-Dimension Linear Interpolation

An accurate real-time model of maglev planar motor based on compound Simpson numerical integration

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Force and Torque Model of Magnetically Levitated System with 2D Halbach Array and Printed Circuit Board Coils

A Novel Two-Degree-of-freedom Spherical Ultrasonic Motor Using Three Travelling-Wave Type Annular Stators

Generation Mechanism and Decoupling Strategy of Coupling Effect in Maglev Planar Motor

Improved ADRC for a Maglev Planar Motor with a Concentric Winding Structure

Integrated Optimization of 3D Structural Topology and 2D Halbach Parameters for Maglev Planar Motor

Analysis and Design of a Magnetically Levitated Planar Motor with Novel Multilayer Windings

Analysis And Design Of A Maglev Permanent Magnet Synchronous Linear Motor To Reduce Additional Torque In Dq Current Control

A Three-Degree-Of-Freedom Short-Stroke Lorentz-Force-Driven Planar Motor Using A Halbach Permanent-Magnet Array With Unequal Thickness

Modeling and Analysis of a Magnetically Levitated Synchronous Permanent Magnet Planar Motor with Concentric Structure Winding