Abstract:Recently, the large-scale deployment of electric vehicles (EVs) and stationary battery systems has put forward urgent requests for rechargeable batteries with higher energy/power density and longer lifespans. As such, next-generation Li-ion batteries (LiBs) are expected to meet these requirements. The possibility of using Ni-rich high-capacity cathode materials (NMC) can help to achieve that goal, however, they still suffer from significant capacity fade via several chemical and mechanical degradation modes. One is crack formation within secondary particles which leads to parasitic reactions that evolve oxygen and potentially initiate the formation of inactive crystal structures. LiBs mechanical and chemical degradation mechanisms can be extended by applying protective coatings to the cathode’s surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing flexible hybrid coatings that can accommodate potential volume changes of the electrode during the battery cycling. This study reports the deposition of novel organic-inorganic films via the ALD-MLD method. Characterization analysis such as FTIR, XPS, SEM-EDS, and TEM confirmed the film deposition on the surface of the NMC electrode. Besides, the electrochemical results showed the enhancement of the coated electrode, as evidenced by providing a longer life with a 93% capacity retention after 150 cycles (3.0-4.4 V vs. Li/Li+), while the uncoated one retained only 83% of its initial capacity. Moreover, in situ dilatometry showed irreversible volume change for uncoated NMC while it was mostly reversible for coated ones during the cycling. It revealed the dilation behavior of the electrode, resulting in crack formation, which is significantly suppressed for the coated samples. Stable cycling of Ni-rich cathode materials in crucial conditions such as high voltage windows and elevated temperatures is still extremely challenging. To evaluate this, in situ dilatometry was performed at elevated temperatures (40 °C and 55 °C) and higher voltage ranges (3.0-4.6 V). The results confirmed that in both conditions, the dilation behavior of the coated sample is still under control while the capacity is comparable to the uncoated sample. This revealed that the coatings present good lithium-ion kinetics and reduce electrolyte decomposition. Overall, this work showed the liability of the ALD-MLD films deposited on NMC electrodes to mitigate the degradation mechanisms and provides insight into a method that seems promising as a protective and elastic coating for future high-energy lithium-ion battery cathodes. Figure 1

Wet-Chemical Synthesis of a Protective Coating on NCM111 Cathode: The Quantified Effects of Washing, Sintering and Coating

Surface Coating of NCM-811 Cathode Materials with G-C3n4 for Enhanced Electrochemical Performance.

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Optimized atomic layer deposition of homogeneous, conductive Al2O3 coatings for high-nickel NCM containing ready-to-use electrodes

The cycle performance of high nickel cathode materials significantly enhanced by the LiAlO2@Al2O3 dual-modified coating

Improving the Performance of LiNi0.9Co0.05Mn0.05O2 via Atomic Layer Deposition of ZnxOy Coating

Boosting cyclability performance of the LiNi0.8Co0.15Al0.05O2 cathode by a polyacrylonitrile-induced conductive carbon surface coating

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Surface Modification of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries.

Stabilized Positive Electrode Material to Enable High Energy/Power Density Lithium-Ion Batteries

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

New insights into dry-coating-processed surface engineering enabling structurally and thermally stable high-performance Ni-rich cathode materials for lithium ion batteries

Enhanced electrochemical performance of LiNi1/3Co1/3Mn1/3O2 cathode material by Al2O3 surface coating derived via NH2-MIL-53(Al) MOF

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Surface Coating of NCM523 Cathode Electrodes by the Difunctional Block Copolymer/Lithium Salt Composites

Reduction of Surface Residual Lithium Compounds for Single-Crystal LiNi0.6Mn0.2Co0.2O2 Via Al2O3 Atomic Layer Deposition and Post-Annealing

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Improved Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Materials Induced by a Facile Polymer Coating for Lithium-Ion Batteries