Abstract:Over the last decade, organic–inorganic lead halide perovskite solar cells (PSCs) have experienced a rapid development, with the power conversion efficiency (PCE) increasing from 3.8% to 25.2%. In part, the progress has been due to the efforts in perfecting perovskite materials, including achieving a suitable bandgap, high absorption coefficient, proper morphology, and stability. In parallel efforts, the optimization of device structure and processing technology, together with perfecting the interfacial materials, strongly impacted the progress. In particular, improvements in the electron transfer layer (ETL), which enables efficient electron transfer and hole blocking, have played a vital role in device improvements. At present, TiO2 is widely adopted as an ETL, mainly due to its favorable band structure and mature fabrication process. However, its high-temperature sintering process (>450 C) hinders any low-cost and large-scale applications, and is unsuitable for the fabrication of flexible PSCs based on plastic substrates. Therefore, low-temperature-processed metal oxide materials, such as ZnO, SnO2, and ZrO2, have been studied as a replacement. Liu and Kelly were the first to use low-temperature-processed ZnO to fabricate a planar PSC, which achieved an efficiency of 15.7%. However, ZnO was found to corrode perovskite above 100 C. Shin et al. fabricated PSCs with an ETL made by using the tedious-toprocess ternary Zn2SnO4, but with a low processing temperature of 100 C, achieving a PCE of 15.3%. Even though SnO2 is considered the best low-temperature-processed ETL material at the moment, the annealing temperature ( 150 C) is still too

Achieving High‐Performance Perovskite Photovoltaic by Morphology Engineering of Low‐Temperature Processed Zn‐Doped TiO 2 Electron Transport Layer

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Low‐Temperature‐Processed WO X As Electron Transfer Layer for Planar Perovskite Solar Cells Exceeding 20% Efficiency

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Low-temperature Processed Tantalum/niobium Co-Doped TiO2 Electron Transport Layer for High-Performance Planar Perovskite Solar Cells

Low temperature ZnO/TiOx electron-transport layer processed from aqueous solution for highly efficient and stable planar perovskite solar cells

Low-temperature processed tantalum/niobium co-doped TiO 2 electron transport layer for high-performance planar perovskite solar cells

Ionic liquid modified SnO2 nanocrystals as a robust electron transporting layer for efficient planar perovskite solar cells

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Novel Low-Temperature Process for Perovskite Solar Cells with a Mesoporous TiO2 Scaffold

Thin Film of TiO2–ZnO Binary Mixed Nanoparticles As Electron Transport Layers in Low-Temperature Processed Perovskite Solar Cells

A low-temperature TiO2/SnO2 electron transport layer for high-performance planar perovskite solar cells

TiO2 Electron Transport Layer with P–n Homojunctions for Efficient and Stable Perovskite Solar Cells

Low Temperature Combustion Synthesized Indium Oxide Electron Transport Layer for High Performance and Stable Perovskite Solar Cells

Low-temperature preparation of titanium dioxide thin layer for highly efficient CsPbI 3 perovskite solar cells

Low-temperature Processed In2S3 Electron Transport Layer for Efficient Hybrid Perovskite Solar Cells

Low-temperature Preparation of Titanium Dioxide Thin Layer for Highly Efficient CsPbI3 Perovskite Solar Cells

High-Performance Electron Transport Layer via Ultrasonic Spray Deposition for Commercialized Perovskite Solar Cells

Green Low-Temperature-solution-processed in Situ HI Modified TiO2/SnO2 Bilayer for Efficient and Stable Planar Perovskite Solar Cells Build at Ambient Air Conditions

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells