Abstract:A new method for the preparation of large 2D Ti3C2Tx MXene nanosheets is reported. The method is based on conventional etching followed by repetitive precipitation and vortex shaking process, which efficiently transfer the mechanical energy for exfoliation. Consequently, large defect‐free sheets that show an excellent electromagnetic shielding performance are produced with high yields. Evaluating the delamination process in the synthesis of MXenes (2D transition metal carbides and nitrides) is critical for their development and applications. However, the preparation of large defect‐free MXene flakes with high yields is challenging. Here, a power‐focused delamination (PFD) strategy is demonstrated that can enhance both the delamination efficiency and yield of large Ti3C2Tx MXene nanosheets through repetitive precipitation and vortex shaking processes. Following this protocol, a colloidal concentration of 20.4 mg mL–1 of the Ti3C2Tx MXene can be achieved after five PFD cycles, and the yield of the basal‐plane‐defect‐free Ti3C2Tx nanosheets reaches 61.2%, which is 6.4‐fold higher than that obtained using the sonication–exfoliation method. Both nanometer‐thin devices and self‐supporting films exhibit excellent electrical conductivities (≈25 000 and 8260 S cm‐1 for a 1.8 nm thick monolayer and 11 μm thick film, respectively). Hydrodynamic simulations reveal that the PFD method can efficiently concentrate the shear stress on the surface of the unexfoliated material, leading to the exfoliation of the nanosheets. The PFD‐synthesized large MXene nanosheets exhibit superior electrical conductivities and electromagnetic shielding (shielding effectiveness per unit volume: 35 419 dB cm2 g–1). Therefore, the PFD strategy provides an efficient route for the preparation of high‐performance single‐layer MXene nanosheets with large areas and high yields.

Reversible Stacking and Delamination‐Regulation of MXene via Controlled Freezing

Controlling three‐dimensional ice template via two‐dimensional surface wetting

Controllable Patterning of Porous MXene (ti3c2) by Metal‐Assisted Electro‐Gelation Method

Reversible Constrained Dissociation and Reassembly of MXene Films

A Facile, High‐Yield, and Freeze‐and‐Thaw‐Assisted Approach to Fabricate MXene with Plentiful Wrinkles and Its Application in On‐Chip Micro‐Supercapacitors

N/P co-doped MXene hollow microcapsules by surfactants assisted hydrothermal-freeze drying for adjustable permeability

High‐Yield Exfoliation of Large MXene with Flake Sizes over 10 μm Using Edge‐Anchored Carbon Nanotubes

Scalable, High‐Yield Monolayer MXene Preparation from Multilayer MXene for Many Applications

Unlocking interfacial dynamics of biocompatible MXene/polyurethane-based nanocomposites for photothermal de-icing and thermal safety

Synchronously Enhanced Storage Stability and Adsorption Ability of MXene Achieved by Grafting Polyethylenimineâ€

Synthesis of Large‐Area MXenes with High Yields through Power‐Focused Delamination Utilizing Vortex Kinetic Energy

L‐Cysteine‐Encapsulated MXene Nanosheet Possessing Ultra‐Antioxidation in Aqueous Suspension for Electrophoretic Deposition Assisted Carbon‐Fiber‐Surface Modification

Atomic Repartition in MXenes by Electron Probes

Manipulating the Interlayer Spacing of 3D MXenes with Improved Stability and Zinc‐Ion Storage Capability

Drawing Highly Ordered MXene Fibers from Dynamically Aggregated Hydrogels

Ultrarapid Gelation of Porous Ti3C2Tx MXene Monoliths Induced by Ionic Liquids

Metal Ion‐Induced Assembly of MXene Aerogels via Biomimetic Microtextures for Electromagnetic Interference Shielding, Capacitive Deionization, and Microsupercapacitors

One-Pot Green Process to Synthesize MXene with Controllable Surface Terminations using Molten Salts

Ultralong Stability of Ti3C2Tx-MXene Dispersion Through Synergistic Regulation of Storage Environment and Defect Capping with Tris-HCl Buffering

Hierarchical Utilization of Raw Ti3C2Tx MXene for Fast Preparation of Various Ti3C2Tx MXene Derivatives

Bioinspired Macroporous Materials of MXene Nanosheets: Ice‐Templated Assembly and Multifunctional Applications