Optimizing the GHG emissions and energy consumption of power plants in the industry of vacuum drying using a controlled atmosphere method (case study: apple pulp)
Marjan Abdollahzadeh Delazi,Reza Amiri Chayjan,Mohammad Kaveh
DOI: https://doi.org/10.1007/s10098-024-02778-2
IF: 4.3
2024-03-03
Clean Technologies and Environmental Policy
Abstract:In agriculture, the transformation and drying industries have the most share of energy consumption. The present study aims to optimize the drying process of apple pulp sheets. This process includes checking the energy consumption values and emission of greenhouse gases by the vacuum system in the normal atmosphere (Natm) and controlled atmosphere (Catm) methods. Experiments were conducted at five drying chamber temperatures (i.e., 45, 55, 65, 75, and 85 °C) and five vacuum pressures (i.e., 40, 50, 60, 70 and 80 kPa). Optimizations were performed using the response surface methodology and the central composite design. The optimum point of apple pulp sheets drying for a gas turbine-oil gas power plant was obtained at a drying temperature of 84.9 °C and vacuum pressure of 60.6 kPa. The desirability index was 0.9936 under these conditions. Besides, the optimal value of the response variables, including drying time, total energy consumption ( EC), specific energy consumption (SEC), NO X emission, and CO 2 emission, were 205 min, 7.65 kWh, 339.02 kWh/kg water , 1962.94 g/kg water , and 210,872.40 g/kg water , respectively. The results showed that in the Catm method, the EC, SEC, NO X , and CO 2 from the oil gas turbine power plant were about 19.22%, 37.19%, 37.19%, and 62.72% less than the Natm method, respectively. Therefore, using a vacuum dryer and applying the Catm method in the gas turbine oil of a gas power plant is more economical regarding environmental pollution than the vacuum dryer using the Natm method.
environmental sciences,green & sustainable science & technology,engineering, environmental