Abstract:Background: Total ankle arthroplasty (TAA) is becoming a more prevalent treatment for end-stage ankle arthritis. However, the effects of malalignment on TAA remain poorly understood. Questions/purposes: The purpose of this study was to quantify the mechanical effects of coronal plane malalignment of the tibial insert in TAA using cadaveric gait simulation. Specifically, we asked, is there a change in (1) ankle joint congruency, (2) kinematic joint position, (3) kinematic ROM, (4) peak plantar pressure, and (5) center of pressure with varus and valgus malalignment? Methods: A modified TAA was implanted into seven cadaveric foot specimens. Wedges were used to simulate coronal plane malalignment of the tibial insert. The degree of malalignment (tibial insert angle [TIA] and talar component angle [TCA]) was quantified radiographically for neutral and 5°, 10°, and 15° varus and valgus wedges. Dynamic walking at 1/6 of physiological speed was simulated using a robotic gait simulator. A motion capture system was used to measure foot kinematics, and a pressure mat was used to measure plantar pressure. Joint congruency was quantified as the difference between TIA and TCA. Continuous joint position, joint ROM, peak plantar pressure, and center of pressure for varus and valgus malalignment compared with neutral alignment were estimated using linear mixed effects regression. Pairwise comparisons between malalignment conditions and neutral were considered significant if both the omnibus test for the overall association between outcome and malalignment and the individual pairwise comparison (adjusted for multiple comparisons within a given outcome) had p ≤ 0.05. Results: Descriptively, the TIA and TCA were both less pronounced than the wedge angle and component incongruence was seen (R = 0.65; p < 0.001). Varus malalignment of the tibial insert shifted the tibiotalar joint into varus and internally rotated the joint. The tibiotalar joint's ROM slightly increased as the TIA shifted into varus (1.3 ± 0.7° [mean ± SD] [95% confidence interval -0.7 to 3.4]; p = 0.03), and the first metatarsophalangeal joint's ROM decreased as the TIA shifted into varus (-1.9 ± 0.9° [95% CI -5.6 to 1.7]; p = 0.007). In the sagittal plane, the naviculocuneiform joint's ROM slightly decreased as the TIA shifted into varus (-0.9 ± 0.4° [95% CI -2.1 to 0.3]; p = 0.017). Hallux pressure increased as the TIA became more valgus (59 ± 50 kPa [95% CI -88 to 207]; p = 0.006). The peak plantar pressure slightly decreased in the third and fourth metatarsals as the TIA shifted into valgus (-15 ± 17° [95% CI -65 to 37]; p = 0.03 and -8 ± 4° [95% CI -17 to 1]; p = 0.048, respectively). The fifth metatarsal's pressure slightly decreased as the TIA shifted into valgus (-18 ± 12 kPa [95% CI -51 to 15]) or varus (-7 ± 18 kPa [95% CI -58 to 45]; p = 0.002). All comparisons were made to the neutral condition. Conclusions: In this cadaver study, coronal plane malalignment in TAA altered foot kinematics and plantar pressure. In general, varus TAA malalignment led to varus shift and internal rotation of the tibiotalar joint, a slight increase in the tibiotalar ROM, and a slight decrease in the first metatarsophalangeal ROM, while a valgus TAA malalignment was manifested primarily through increased hallux pressure with a slight off-loading of the third and fourth metatarsals. Clinical relevance: This study may increase our understanding of the biomechanical processes that underlie the unfavorable clinical outcomes (such as, poor patient-reported outcomes or implant loosening) that have been associated with coronal plane malalignment of the tibial component in TAA.

Intraarticular contact stresses with simulated ankle malunions

Effect of Various Reduction Degrees of Posterior Malleolus Fracture on Tibiotalar Joint Contact

Establishment of a finite element model of supination-external rotation ankle joint injury and its mechanical analysis

The Influence of Talar Displacement on Articular Contact Mechanics: A 3D Finite Element Analysis Study Using Weightbearing Computed Tomography

Biomechanical Effects of Hindfoot Alignment in Supination External Rotation Malleolar Fractures: A Human Cadaveric Model

Ankle Joint Pressure Change in Varus Malalignment of the Tibia

Normative contact mechanics of the ankle Joint: Quantitative assessment utilizing bilateral weightbearing CT

Ankle Joint Pressure Change in Varus Malalignment of Tibia

Biomechanical analysis of the calcaneocuboid joint pressure after sequential lengthening of the lateral column.

Experimental Study of Effect of Subtalar Joint Arthrodesis on Middle and Hind Foot Motion

Biomechanical evaluation of total ankle arthroplasty. Part II: Influence of loading and fixation design on tibial bone-implant interaction

Impact of talar component rotation on contact pressure after total ankle arthroplasty: a cadaveric study.

Effect of the Posterior Malleolar Fracture on the Loading Area of the Ankle

Establishment of a Finite Element Model and Stress Analysis of Intra-Articular Impacted Fragments in Posterior Malleolar Fractures

Biomechanical evaluation of total ankle arthroplasty. Part I: Joint loads during simulated level walking

Morphological Analysis of Posterior Malleolar Fractures with Intra-Articular Impacted Fragment in Computed Tomography Scans

Comparison of Stress Distribution Between Normal and Malunion Calcaneus

Morphological Analysis of Pilon Variant Posterior Malleolar Fracture and Three-Dimensional Finite Element Analysis of Injury Mechanism

Does Coronal Plane Malalignment of the Tibial Insert in Total Ankle Arthroplasty Alter Distal Foot Bone Mechanics? A Cadaveric Gait Study

Congruent Weber-B ankle fractures do not alter tibiotalar contact mechanics

Analysis of stress response distribution in patients with lateral ankle ligament injuries: a study of neural control strategies utilizing predictive computing models