Abstract:This paper introduces a robust system designed to effectively manage and enhance the electrical output of a Wind Energy Conversion System (WECS) using a Cascaded Doubly Fed Induction Generator (CDFIG) connected to a power grid. The solution that was investigated is the use of a CDFIG that is based on a variable-speed wind power conversion chain. It comprises the electrical and mechanical connection of two DFIGs through their rotors. The originality of this paper lies in the innovative application of a fuzzy logic controller (FLC) in combination with a CDFIG for a WECS. To demonstrate that this novel configuration enhances control precision and performance in WECSs, we conducted a comparison of three different controllers: a proportional–integral (PI) controller, a fractional PID (FPID) controller, and a fuzzy logic controller (FLC). The results highlight the potential of the proposed system in optimizing power generation and improving overall system stability. It turns out that, according to the first results, the FLC performed optimally in terms of tracking and rejecting disturbances. In terms of peak overshoot for power and torque, the findings indicate that the proposed FLC-based technique (3.8639% and 6.9401%) outperforms that of the FOPID (11.2458% and 10.9654%) and PI controllers (11.4219% and 11.0712%), respectively. These results demonstrate the superior performance of the FLC in reducing overshoot, providing better control stability for both power and torque. In terms of rise time, the findings show that all controllers perform similarly for both power and torque. However, the FLC demonstrates superior performance with a rise time of 0.0016 s for both power and torque, compared to the FOPID (1.9999 s and 1.9999 s) and PI (0.0250 s and 0.0247 s) controllers. This highlights the FLC's enhanced responsiveness in controlling power and torque. In terms of settling time, all three controllers have almost the same performance of 1.9999. An examination of total harmonic distortion (THD) was also employed to validate the superiority of the FLC. In terms of power quality, the findings prove that a WECS based on an FLC (0.93%) has a smaller total harmonic distortion (THD) compared to that of the FOPID (1.21%) and PI (1.51%) controllers. This system solves the problem by removing the requirement for sliding ring–brush contact. Through the utilization of the MATLAB/Simulink environment, the effectiveness of this control and energy management approach was evaluated, thereby demonstrating its capacity to fulfill the objectives that were set.

Jellyfish search algorithm-based optimum tuning of PI controller for a front-end converter in a DFIG-based wind energy conversion system

Optimized Control of DFIG-Based Wind Generation Using Sensitivity Analysis and Particle Swarm Optimization

Optimized design of resonant controller for stator current harmonic compensation in DFIG wind turbine systems

Small Signal Stability Analysis and Optimal Control of a Wind Turbine with Doubly Fed Induction Generator

Parameter Tuning of Doubly Fed Induction Generator Systems for Wind Turbines Based on Orthogonal Design and Particle Swarm Optimization

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Fuzzy Logic-Based Smart Control of Wind Energy Conversion System Using Cascaded Doubly Fed Induction Generator

Comparative application of the self-adaptive fuzzy-PI controller for a wind energy conversion system connected to the power grid and based on DFIG

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance

Design and implementation of energy reshaping based fuzzy logic control for optimal power extraction of PMSG wind energy converter

Design and Optimization of Proportional Resonant Controller for Rotor Current of a Wind Turbine Driven DFIG

Design of Multi-Objective-Based Artificial Intelligence Controller for Wind/Battery-Connected Shunt Active Power Filter

Salp swarm algorithm–based optimal vector control scheme for dynamic response enhancement of brushless double‐fed induction generator in a wind energy conversion system

Optimal Design of Fractional Order Vector Controller Using Hardware-in-Loop (HIL) and Opal RT for Wind Energy System

SABO optimization algorithm-based backstepping controller for DSIG within a wind turbine system

Control for Variable Speed Wind Turbine Driving a Doubly Fed Induction Generator using Fuzzy-PI Control

Development of constant switching frequency model predictive control for DFIG-based wind energy conversion system in standalone and grid connected operation

Jellyfish Search Optimized Gated Recurrent Unit Based FOPID/PID for Enhanced Automatic Voltage Regulator

Enhancing power quality with optimized PI controller in three-phase four-wire wind energy system