Abstract:Carbon emissions have become a prominent global concern, with the utilization of fossil fuels serving as the primary contributor. Ammonia, being a hydrogen carrier without carbon, has the potential to be utilized through combustion, resulting in the production of water and nitrogen as ideal byproducts, which are environmentally benign. However, individual ammonia is difficult to combust due to its unfavorable combustion characteristics. Hence, ammonia needs to be blended with other fuels that possess superior combustion characteristics. Additionally, NH 3 inherently contains a significant amount of nitrogen, a fuel element that can contribute to the increased release of NO x emissions. In this work, a simulation was conducted using CHEMKIN to investigate the nitrogen transformation characteristics during ammonia/coal co-firing under deeply air-staged combustion. Experimental studies primarily focus on macroscopic factors, such as temperature and pressure, while often neglecting the analysis of reaction mechanisms. The utilization of the chemical reaction kinetics simulation method can provide valuable insights into the reactions and substances that exert the most significant impact on the formation of NO x , as well as elucidate the pathway of fuel-nitrogen conversion during combustion. Simulation results demonstrate that as the NH 3 co-firing ratio (CR-NH 3 ) increases, the volume content of NO x initially rises, reaching its peak at approximately 10% CR-NH 3 , and subsequently declines. The conversion rate of NO x increases as the combustion temperature in the primary combustion area rises. The primary reactions have a greater influence on the formation of NO at low-temperature conditions. However, it is important to note that low temperature also decreases the combustion efficiency. The incorporation of overfire air (OFA) in advance has the potential to mitigate nitrogen reduction in the primary combustion area, while simultaneously improving NO x emissions. With the oxygen concentration of primary air increased, the conversion rate of NO x gradually decreases. It undergoes a sharp change before reaching 21% oxygen concentration, after which it levels off. In addition, high oxygen concentration increases the pathway of NO consumption. When the excess air coefficient of OFA falls within the range of 0.35–0.45, the NO x conversion rate can be minimized. The present study aims to offer technical assistance and guidance for effectively controlling NO x emissions in ammonia/coal co-firing boilers.

Thermodynamic analysis of novel ammonia addition to raw iron making followed by neural network development prediction

Iron Oxide Direct Reduction and Iron Nitride Formation Using Ammonia: Review and Thermodynamic Analysis

Direct Synthesis of Ammonia from N 2 and H 2 O on Different Iron Species Supported on Carbon Nanotubes Using a Gas‐Phase Electrocatalytic Flow Reactor

Thermal Kinetics and Nitriding Effect of Ammonia-Based Direct Reduction of Iron Oxides

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Artificial Neural Network Model for Temperature Prediction and Regulation during Molten Steel Transportation Process

Reducing Iron Oxide with Ammonia: A Sustainable Path to Green Steel

Machine Learning Assisted Analysis of an Ammonia Engine Performance

Efficient Chemical Equilibria Calculation by Artificial Neural Networks for Ammonia Cracking and Synthesis

Analysis of ammonia combustion for decarbonization followed by selective non-catalytic reduction of nitrogen oxides

Simulation study on nitrogen transformation characteristics of NH 3 /Coal Co-firing under deeply air-staged condition

Simulation Study on Nitrogen Transformation Characteristics of NH3/Coal Co-firing under Deeply Air-Staged Condition

Influence Factor Analysis and Prediction Model of End-Point Carbon Content Based on Artificial Neural Network in Electric Arc Furnace Steelmaking Process

Predicting endpoint parameters of electric arc furnace–based steelmaking using artificial neural network

Effect of Ammonia Injection on the Iron Ore Sintering Process: Reducing Fossil Fuel Consumption and Carbon Emissions

An Experimental and Kinetic Modelling Study on the Oxidation of NH3, NH3/H2, NH3/CH4 in a Variable Pressure Laminar Flow Reactor at Engine-Relevant Conditions

Artificial Neural Network Model for the Prediction of Methane Bi-Reforming Products Using CO2 and Steam

Prediction of NOx emission from two-stage combustion of NH 3 –H 2 mixtures under various conditions using artificial neural networks