Abstract:Supercapacitors have the characteristics of high power density, long cycle life, and fast charge and discharge rates, making them promising alternatives to traditional capacitors and batteries. The use of transition-metal compounds as electrode materials for supercapacitors has been a compelling research topic in recent years because their use can effectively enhance the electrical performance of supercapacitors. The current research on capacitor electrode materials can mainly be divided into the following three categories: carbon-based materials, metal oxides, and conductive polymers. Nickel hydroxide (Ni(OH)2) is a potential electrode material for use in supercapacitors. Depending on the preparation conditions, two crystal phases of nickel hydroxide, α and β, can be produced. When compared to α-NiOH, the structure of β-Ni(OH)2 does not experience ion intercalation. As a result, the carrier transmission rate of α-Ni(OH)2 is slower, and its specific capacitance value is smaller. Its carrier transport rate can be improved by adding conductive materials, such as graphene. β-Ni(OH)2 was chosen as an electrode material for a supercapacitor in this study. Homemade low-pressure chemical vapor deposition graphene (LPCVD-Graphene) conductive material was introduced to modify β-Ni(OH)2 in order to increase its carrier transport rate. The LPCVD method was used to grow high-quality graphene films on three-dimensional (3D) nickel foam substrates. Then, a hydrothermal synthesis method was used to grow β-Ni(OH)2 nanostructures on the 3D graphene/nickel foam substrate. In order to improve the electrical properties of the composite structure, a high-quality graphene layer was incorporated between the nickel hydroxide and the 3D nickel foam substrate. The effect of the conductive graphene layer on the growth of β-Ni(OH)2, as well as its electrical properties and electrochemical performance, was studied. When this β-Ni(OH)2/CVD-Graphene/3D-NF (nickel foam) material was used as the working electrodes of the supercapacitor under a current density of 1 A/g and 3 A/g, they exhibited a specific capacitance of 2015 F/g and 1218.9 F/g, respectively. This capacitance value is 2.62 times higher than that of the structure without modification with a graphene layer. The capacitance value remains at 99.2% even after 1000 consecutive charge and discharge cycles at a current density of 20 A/g. This value also improved compared to the structure without graphene layer modification (94.7%).

Controlling the Cooling Rate of Hydrothermal Synthesis to Enhance the Supercapacitive Properties of β-Nickel Hydroxide Electrode Materials

Facile Hydrothermal Synthesis of Feather-like Nickel Phosphite As Cathode Materials for Supercapacitors

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

Preparation of Electrodes with β-Nickel Hydroxide/CVD-Graphene/3D-Nickel Foam Composite Structures to Enhance the Capacitance Characteristics of Supercapacitors

Micro-Spatial Hydrothermal Preparation of Nitrogen-doped Carbon/NiCo2S4 Electrode Material for Supercapacitors

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

Unveiling the Dynamic Capacitive Storage Mechanism of Co3O4 @nico2o4 Hybrid Nanoelectrodes for Supercapacitor Applications

Controllable Growth of NiSe Nanorod Arrays Via One-Pot Hydrothermal Method for High Areal-Capacitance Supercapacitors

One-Pot Fabrication Of Layered Alpha-Phase Nickel-Cobalt Hydroxides As Advanced Electrode Materials For Pseudocapacitors

Simple deposition of mixed α, β-nickel hydroxide thin film onto nickel foam as high-performance supercapacitor electrode material

One-step Synthesis of Amino Acid-Derived HTC/NiO/Ni(OH)2@Ni Cathode for High Performance Supercapacitors

A One‐Step and Binder‐Free Method to Fabricate Hierarchical Nickel‐Based Supercapacitor Electrodes with Excellent Performance

Facile Electrodeposition of 3D Concentration-Gradient Ni-Co Hydroxide Nanostructures on Nickel Foam As High Performance Electrodes for Asymmetric Supercapacitors

Hydrothermal preparation of MnNiO3/Ni6MnO8 nanospheres on nickel foam as a high stability electrode material for supercapacitor

Design of Three-Dimensional Nickel Foam/Carbon Fiber Composite Supported Nickel–Cobalt Hydroxides for High-Performance Supercapacitor Electrode Materials

Nickel–Cobalt Hydroxide Microspheres Electrodepositioned on Nickel Cobaltite Nanowires Grown on Ni Foam for High-Performance Pseudocapacitors

Rapid and Controllable Synthesis of Nanocrystallized Nickel‐Cobalt Boride Electrode Materials via a Mircoimpinging Stream Reaction for High Performance Supercapacitors

Facile synthesis of nanostructured bismuth oxide on nickel foam with outstanding electrochemical behavior for supercapacitor application

High-Performance Nickel Cobalt Hydroxide Nanosheets/Graphene/Ni foam Composite Electrode for Supercapacitor Applications

Controllable Synthesis of 3D Binary Nickel–cobalt Hydroxide/graphene/nickel Foam As a Binder-Free Electrode for High-Performance Supercapacitors

A new method for one-step hydrothermal synthesis of nickel cobalt selenide electrode material for supercapacitor