Fast Zernike fitting of freeform surfaces using the Gauss-Legendre quadrature

Yiwen Fan,G. W. Forbes,Jannick P. Rolland

DOI: https://doi.org/10.1364/oe.523022

IF: 3.8

2024-05-17

Optics Express

Abstract:Yiwen Fan, G. W. Forbes, Jannick P. Rolland Zernike polynomial orthogonality, an established mathematical principle, is leveraged with the Gauss-Legendre quadrature rule in a rapid ... [Opt. Express 32, 20011-20023 (2024)]

optics

What problem does this paper attempt to address?

Description Of Complex Optical Surface Based On Sparse Radial Basis Function Approximation With Spatially Variable Shape Parameters

Xiangdong Zhou,Jian Bai,Xiao Huang,Lei Zhao,Chen Wang,Yujie Luo

DOI: https://doi.org/10.1117/12.2506450

2018-01-01

Abstract:It is necessary to fit the discrete sampling value of the optical element surface obtained by measuring equipment, because the results of fitting are useful for manufacturing and optical design. The commonly used fitting methods are X-Y polynomial approximation, Zernike polynomial approximation and radial basis function (RBF) approximation. Compared with others, radial basis function is more suitable to fit the complex optical surface. However, the further improvement of fitting accuracy and cost are limited by the fixed shape parameter of the classic RBF approximation. In this paper, we propose the sparse radial basis function approximation with spatially variable shape parameters to fit discretely sampled optical surfaces. Our main purpose is to improve fitting accuracy and to reduce computational cost. Then, we analyze the impact of the spatial distribution of RBF nodes on fitting. Finally, we compare the accuracy and cost between the classic RBF approximation and the sparse RBF approximation with spatially variable shape parameters by fitting various complex surface.
Simplified Quadrilateral Grid Generation of Complex Free-Form Gridshells by Surface Fitting

Zhiwei Shan,Lijie Chen,Qisheng Wang,Hui Wu,Boqing Gao

DOI: https://doi.org/10.1016/j.jobe.2021.103827

IF: 7.144

2021-01-01

Journal of Building Engineering

Abstract:In this paper, a quadrilateral grid generation algorithm based on surface fitting is proposed for complex free-form surfaces. The ray-surface intersection and plane-surfce intersection methods are proposed to fit complex free-form surfaces into one free-form surface. Based on the fitted surface, quadrilateral grids were generated by using the geodesics or the Chebyshev algorithm. The grids were then smoothed by a physics-based algorithm. The grid quality was evaluated by fluency, shape quality and rod length indices. Compared with the conventional method in which grids are separately generated and manually modified, the fluency index and the standard deviation of the rod length index of the grids generated by the proposed methods reduce by up to 87% and 94% respectively. The results show that the grids generated by the proposed methods are more fluent and uniform compared with those by the conventional method.
Generating Optical Freeform Surfaces Considering Both Coordinates and Normals of Discrete Data Points

Jun Zhu,Xiaofei Wu,Tong Yang,Guofan Jin

DOI: https://doi.org/10.1364/josaa.31.002401

2014-01-01

Abstract:Through direct design methods, both coordinates and normals of discrete data points on a freeform surface are usually obtained, but traditionally the freeform surface is generated by only fitting the coordinates. In this paper, a novel generating method that fits both the coordinates and the normals is proposed based on the mathematical multiobjective optimization theory. This new method is suited for generating some freeform polynomial surfaces. Two design examples are introduced, and their optical performance is significantly improved when applying the new method compared with the traditional method. This new method is validated to be effective, and it is widely useful as long as the coordinates and the normals are provided in advance.
Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

Yijie Dai,Yingli Liu,Fanqi Shen,Cuifang Kuang,Zhenrong Zheng,Rengmao Wu

DOI: https://doi.org/10.1364/ao.473823

IF: 1.9

2022-01-01

Applied Optics

Abstract:Aberration theory is a fundamental understanding of the optical aberrations and remains the best way to guide optical system design. The nodal aberration theory, which can be used to describe the aberration fields of freeform imaging systems, is limited by the small field of view (FOV) of the imaging system. In this paper, we propose a method to predict the induced aberration of Fringe Zernike terms with field-dependent footprints. The footprint of each field point is calculated in its corresponding local tangent plane of the optical surface; therefore, a more accurate prediction of the induced aberrations of Fringe Zernike terms can be achieved. Both the FOV and highly tilted architecture of freeform imaging systems are considered when calculating the footprints. Two examples are presented to verify the effectiveness of the proposed method, which we believe can provide good guidance for the design of freeform imaging systems with a relatively large FOV.
ZERNIPAX: A Fast and Accurate Zernike Polynomial Calculator in Python

Yigit Gunsur Elmacioglu,Rory Conlin,Daniel W. Dudt,Dario Panici,Egemen Kolemen

2024-09-28

Abstract:Zernike Polynomials serve as an orthogonal basis on the unit disc, and have been proven to be effective in optics simulations, astrophysics, and more recently in plasma simulations. Unlike Bessel functions, they maintain finite values at the disc center, ensuring inherent analyticity along the axis. We developed ZERNIPAX, an open-source Python package capable of utilizing CPU/GPUs, leveraging Google's JAX package and available on <a class="link-external link-https" href="https://github.com/PlasmaControl/FastZernike.git" rel="external noopener nofollow">this https URL</a> as well as PyPI. Our implementation of the recursion relation between Jacobi polynomials significantly improves computation time compared to alternative methods by use of parallel computing while still preserving accuracy for mode numbers n>100.

Performance
Spectral Quadrangulation with Orientation and Alignment Control.

Jin Huang,Muyang Zhang,Jin Ma,Xinguo Liu,Leif Kobbelt,Hujun Bao

DOI: https://doi.org/10.1145/1457515.1409100

2008-01-01

Abstract:This paper presents a new quadrangulation algorithm, extending the spectral surface quadrangulation approach where the coarse quadrangular structure is derived from the Morse-Smale complex of an eigenfunction of the Laplacian operator on the input mesh. In contrast to the original scheme, we provide flexible explicit controls of the shape, size, orientation and feature alignment of the quadrangular faces. We achieve this by proper selection of the optimal eigenvalue (shape), by adaption of the area term in the Laplacian operator (size), and by adding special constraints to the Laplace eigenproblem (orientation and alignment). By solving a generalized eigen-problem we can generate a scalar field on the mesh whose Morse-Smale complex is of high quality and satisfies all the user requirements. The final quadrilateral mesh is generated from the Morse-Smale complex by computing a globally smooth parametrization. Here we additionally introduce edge constraints to preserve user specified feature lines accurately.
Aspherical Surface Profile Fitting Based on the Relationship Between Polynomial and Inner Products

Xuemin Cheng,Yikang Yang,Qun Hao

DOI: https://doi.org/10.1117/1.oe.55.1.015105

IF: 1.3

2016-01-01

Optical Engineering

Abstract:High-precision aspherical polynomial fitting is essential to image quality evaluation in optical design and optimization. However, conventional fitting methods cannot reach optimal fitting precision and may somehow induce numerical ill-conditioning, such as excessively high coefficients. For this reason, a projection from polynomial equations to vector space was here proposed such that polynomial solutions could be obtained based on matrix and vector operation, so avoiding the problem of excessive coefficients. The Newton-Raphson iteration method was used to search for optimal fitting of the spherical surface. The profile fitting test showed that the proposed approach was able to obtain results with high precision and small value, which solved the numerical ill-conditioning phenomenon effectively. (C) The Authors. Published by SPIE
Wavefront Fitting with Zernike Polynomials Based on Total Variation Regularization Method

Lihong Lu,Qingyu Hou

DOI: https://doi.org/10.1117/12.2001016

2012-01-01

Abstract:The wavefront function can be achieved by fitting the optical surfaces date using Zernike polynomials because of the corresponding relation between Zernike polynomials and Seidel aberrations. In this paper, the reason of the stable solution cannot be achieved when proceed to fit wavefront by least square, Gram-Schmidt orthogonalization and Householder transformation is deduced in theory. The Zernike coefficients fitting method based total variation ( TV) regularization is presented to resolve the instability of numerical solution because of there are errors in phase values obtained by optimization algorithm in Least Square, Gram-Schmidt orthogonalization and Householder transformation. The solving model of Zernike coefficients is developed, and the regularization term is introduced in solving model, then the L-curve method is applied to determine the regularization parameter and the modified steepest descent method is applied to solve Zernike coefficients. The simulation experiment shows that the proposed algorithm can be achieve the stable fitting coefficients with the error on fitting data.
A Novel Optical Aspherical Surface for Panoramic Imaging System

李晓彤,岑兆丰

DOI: https://doi.org/10.3969/j.issn.1003-501X.2001.06.010

2001-01-01

Abstract:Single fore-element with complex aspherical surface used for panoramic imaging system is presented. Proceeding from the basic principle of geometry optics, the Gaussian analysis is derived and a group of equations for the surface form under the different cases are given. A series of polynomial expressions are obtained by use of orthogonal fitting algorithm. These expressions have been successfully applied to ray tracing and aberration calculation.
Third Order Newton's Method for Zernike Polynomial Zeros

Richard J. Mathar

2024-04-21

Abstract:The Zernike radial polynomials are a system of orthogonal polynomials over the unit interval with weight x. They are used as basis functions in optics to expand fields over the cross section of circular pupils. To calculate the roots of Zernike polynomials, we optimize the generic iterative numerical Newton's Method that iterates on zeros of functions with third order convergence. The technique is based on rewriting the polynomials as Gauss Hypergeometric Functions, reduction of second order derivatives to first order derivatives, and evaluation of some ratios of derivatives by terminating continued fractions.

Numerical Analysis
Description and implementation studies on field dependent wavefront aberration

Luwei Zhang,Xiaotong Li,Zhaofeng Cen

DOI: https://doi.org/10.1117/12.999684

2012-01-01

Abstract:Zernike polynomials have been widely used to fit lens surface figure error and the wavefront aberration of optical systems, for its orthogonality in the unit circle and its corresponding relationships with optical aberrations 1. Because the current extensively used Zernike polynomials are just functions of the aperture, without consideration of the field factor, it can only represent single field wavefront aberration. This is incomplete for the description of the wavefront aberration, especially for lithographic lens with a large field and high imaging quality 2. Thus, considering the field factor in the description of wavefront aberration becomes very necessary. This paper presents a convenient and practical method to describe the full field wavefront aberration. A rotationally symmetric optical system has been taken as an example, in the scope of normalized full field, taking the Chebyshev zero points as nodes, and applying the Chebyshev polynomials to the fitting of Zernike coefficients of different fields. Meanwhile, the influence of the degree of Chebyshev polynomials and the number of fitting nodes on the fitting accuracy is taken into account. The results show that the fitting method used in this paper is of high accuracy, and this fitting method is very significant for the analysis of full field wavefront aberration.
Fast Evaluation of Minimum Zone form Errors of Freeform NURBS Surfaces

xiangchao zhang,hao zhang,xiaoying he,min xu

DOI: https://doi.org/10.1016/j.procir.2015.04.038

2015-01-01

Procedia CIRP

Abstract:Nowadays freeform components are more and more commonly employed in precision engineering and it is crucial to evaluate their form qualities. The widely adopted PV parameters for form errors need to be evaluated in the sense of minimum zone, which is a non-differentiable optimization problem, and very difficult to be solved. Currently NURBS has become a ubiquitous data format in computer aided design and manufacturing. However, little can be found concerning the minimum zone fitting between the NURBS surfaces and measured data, due to the mathematical complexity of this problem. A fast evaluation strategy is proposed in this paper. It is implemented in three stages. The NURBS model is decomposed into Bezier patches first and the iterative closest point matching is implemented. And then the relative position is refined by the orthogonal distance least squares fitting. Finally the minimum zone fitting is carried out by the primal-dual interior point method. The solutions are recursively updated by line search until the Karush-Kuhn-Tucker conditions are satisfied. Numerical experiments proved that the proposed method is capable of minimum zone fitting for freeform NURBS surfaces with very high accuracy and efficiency.
High-precision analysis of aberration contribution of Zernike freeform surface terms for non-zero field of view

Shuai Zhang,Xing Zhao,Da Li,Hao Feng,Shangnan Zhao,Lingjie Wang,Xin Zhang

DOI: https://doi.org/10.1364/oe.511052

IF: 3.8

2024-01-18

Optics Express

Abstract:Shuai Zhang, Xing Zhao, Da Li, Hao Feng, Shangnan Zhao, Lingjie Wang, Xin Zhang Clarifying the aberrations arising from freeform surfaces is of great significance for maximizing the potential of freeform surfaces in the ... [Opt. Express 32, 3167-3183 (2024)]

optics
Spectral quadrangulation with boundary conformation

Ruotian Ling,Jin Huang,Feng Sun,Bert Juttler,Hujun Bao,Wenping Wang

2011-01-01

Abstract:Existing spectral quadrangulation methods are effective only for closed surfaces, because they cannot satisfactorily handle surfaces with boundaries or feature lines that need to be respected. We propose an extension to the spectral quadrangulation approach that ensures boundary/feature conformation. Our contributions include the formulation of a set of new boundary conditions and the introduction of quasi-eigenfunctions that are solutions of a PDE with the new boundary conditions. We also develop algorithms for computing the quasi-eigenfunctions and extracting their Morse-Smale complexes to generate desired quadrangulation. We further extend the method to generating adaptive quadrangulation observing a pre-specified density function. Experiments show that our method produces better quadrilateral meshes with conforming boundaries/features and varying element size than existing methods do.
Study on Wavefront Fitting Using Zernike Polynomials

ZHANG Wei,LIU Jian-feng,LONG Fu-nian,WANG Zhi-le

DOI: https://doi.org/10.3321/j.issn:1002-1582.2005.05.006

2005-01-01

Abstract:Both radial errors with different spatial frequencies and local errors with different aperture sizes were fitted using Zernike polynomials. Householder transformation method was applied to work out Zernike coefficients, getting the RMS value of fitting errors. The limitation of Zernike polynomials was analyzed. The results showed that the maximum spatial frequency limits the fitting accuracy of radial errors, and the aperture size limits the fitting accuracy of local errors, generating extra ripples.
Variational calculus approach to Zernike polynomials with application to FCS

Ivan Gligonov,Jörg Enderlein

DOI: https://doi.org/10.1016/j.bpj.2024.08.010

2024-08-20

Abstract:Zernike polynomials are a sequence of orthogonal polynomials that play a crucial role in optics and, in particular, modeling microscopy systems. Introduced by Frits Zernike in 1934, they are particularly useful in expressing wavefront aberrations and, thus, imperfections of imaging systems. However, their origin and properties are rarely discussed and proven. Here, we present a novel approach to Zernike polynomials using variational calculus and apply them to describe aberrations in fluorescence microscopy. In particular, we model the impact of various optical aberrations on the performance of one-photon and two-photon excitation fluorescence microscopy.
Nodal Aberration Properties of Coaxial Imaging Systems Using Zernike Polynomial Surfaces.

Tong Yang,Jun Zhu,Guofan Jin

DOI: https://doi.org/10.1364/josaa.32.000822

2015-01-01

Journal of the Optical Society of America A

Abstract:As a combination of the nodal aberration theory (NAT) and the freeform surface optical design, the nodal aberration properties of Zernike polynomial surfaces in a coaxial imaging system are analyzed in detail in this paper. The aberrations induced by the Zernike polynomial terms on either the reflective or the refractive surfaces in the system can be quantitatively calculated, which can be used to predict the surface figure or mount-induced errors, or as guidance for aberration correction and optimization during the freeform optical design. Specially, some new kinds of aberrations with complex field dependence can be generated by the Zernike polynomial terms, which further lead to the discovery of linear or multilinear nodes (cruciate nodes) in the aberration field. This linear nodal property will benefit the design of some kinds of freeform optical systems with a linear field of view. Furthermore, an iterative method based on the NAT is proposed to correct the field-constant aberrations.
Description Method with Automatically Configurable Gaussian Radial Basis Function for Complex Freeform Surface

Qun Hao,Xu Chang,Yao Hu,Xin Tao,Jiahang Lv,Yan Ning,Xuemin Cheng

DOI: https://doi.org/10.1364/oe.426130

IF: 3.8

2021-01-01

Optics Express

Abstract:The description of deformable mirror (DM) surface, which is usually a complex freeform surface, affects the measurement speed and accuracy in a real-time interferometric measurement system with a DM as the dynamic compensator. We propose an accurate and fast description method with automatically configurable Gaussian radial basis function. The distribution and shape factors of GRBFs are related to the complexity of the surface with sufficient flexibility to improve the accuracy, and the fitting results are automatically obtained using a traversal optimization algorithm, which can improve the fitting speed by reducing the number of time-consuming calculations. The feasibility is verified by numerical and practical experiment.
Parameter Analysis of Freeform Surface Description Method with Automatically Configurable Gaussian Radial Basis Function

Xu Chang,Qun Hao,Yao Hu,Xin Tao,Jiahang Lv,Zhen Wang,Yiming Liu,Xuemin Cheng

DOI: https://doi.org/10.1117/12.2615962

2021-01-01

Abstract:In AR and VR devices, freeform surfaces are widely used to improve system performance. The manufacture of freeform surfaces is limited to the measurement. In order to guide the manufacturing process, we have proposed a real-time interferometric measurement system. In the system, an accurate, automatic and fast description method is needed to describe complex freeform surface. In order to improve this situation, a description method with automatically configurable Gaussian radial basis function (AC-GRBF) has been proposed. The key parameters of AC-GRBF, the number of subapertures N, coefficient A and the base number of GRBFs affect the fitting accuracy and speed, and they are analyzed by numerical simulation in the paper. The analysis in this paper can provide reference for the description method of GRBF, especially AC-GRBF, and the description of complex freeform surfaces in the design.
Zeros of generalized hypergeometric polynomials via finite free convolution. Applications to multiple orthogonality

Andrei Martinez-Finkelshtein,Rafael Morales,Daniel Perales

2024-06-03

Abstract:We address the problem of the weak asymptotic behavior of zeros of families of generalized hypergeometric polynomials as their degree tends to infinity. The main tool is the representation of such polynomials as a finite free convolution of simpler elements; this representation is preserved in the asymptotic regime, so we can formally write the limit zero distribution of these polynomials as a free convolution of explicitly computable measures. We derive a simple expression for the S-transform of the limit distribution, which turns out to be a rational function, and a representation of the Kampé de Fériet polynomials in terms of finite free convolutions. We apply these tools, as well as those from [<a class="link-https" data-arxiv-id="2309.10970" href="https://arxiv.org/abs/2309.10970">arXiv:2309.10970</a>], to the study of some well-known families of multiple orthogonal polynomials (Jacobi-Piñeiro and multiple Laguerre of the first and second kinds), obtaining results on their zeros, such as interlacing, monotonicity, and asymptotics.

Classical Analysis and ODEs

Fast Zernike fitting of freeform surfaces using the Gauss-Legendre quadrature

Description Of Complex Optical Surface Based On Sparse Radial Basis Function Approximation With Spatially Variable Shape Parameters

Simplified Quadrilateral Grid Generation of Complex Free-Form Gridshells by Surface Fitting

Generating Optical Freeform Surfaces Considering Both Coordinates and Normals of Discrete Data Points

Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

ZERNIPAX: A Fast and Accurate Zernike Polynomial Calculator in Python

Spectral Quadrangulation with Orientation and Alignment Control.

Aspherical Surface Profile Fitting Based on the Relationship Between Polynomial and Inner Products

Wavefront Fitting with Zernike Polynomials Based on Total Variation Regularization Method

A Novel Optical Aspherical Surface for Panoramic Imaging System

Third Order Newton's Method for Zernike Polynomial Zeros

Description and implementation studies on field dependent wavefront aberration

Fast Evaluation of Minimum Zone form Errors of Freeform NURBS Surfaces

High-precision analysis of aberration contribution of Zernike freeform surface terms for non-zero field of view

Spectral quadrangulation with boundary conformation

Study on Wavefront Fitting Using Zernike Polynomials

Variational calculus approach to Zernike polynomials with application to FCS

Nodal Aberration Properties of Coaxial Imaging Systems Using Zernike Polynomial Surfaces.

Description Method with Automatically Configurable Gaussian Radial Basis Function for Complex Freeform Surface

Parameter Analysis of Freeform Surface Description Method with Automatically Configurable Gaussian Radial Basis Function

Zeros of generalized hypergeometric polynomials via finite free convolution. Applications to multiple orthogonality