Abstract:In recent times, MoNbTaW Refractory High Entropy Alloys (RHEAs) have drawn attention due to their exciting high-temperature applications and efforts are being made to improve their properties further. Alloying addition is an effective and practical approach to enhancing material properties. Ti is well known for its strength, low density, and corrosion resistance and its role in the properties of MoNbTaW-based RHEAs is required to be understood. RHEAs are commonly synthesized by vacuum arc melting (VAR) process and micro-segregation of the elements is reported. However, the effect of micro-segregation on MoNbTaW RHEAs is not well understood. Hence, the present work deals with the addition of Ti and micro-segregation on the structure, microstructure, and indentation behavior of MoNbTaW RHEAs. A novel non-equiatomic MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs were prepared by vacuum arc melting (VAR) process. The structure and microstructure of these RHEAs were ascertained through X-ray diffraction (XRD) and transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with EDS for ascertaining the nominal chemical composition. The as-cast MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs contains two BCC phase having slightly different lattice parameter i.e., BCC1 (a = 0.324 nm) and BCC2 (a = 0.323 nm) close to Ti and W respectively. These as-cast RHEAs having dendritic and inter-dendritic regions were found to be enriched in W and Ta, and Mo, Nb and Ti respectively. The microhardness of these RHEAs was investigated through instrumented indentation techniques. The microhardness of the BCC1 and BCC2 phases was found to be ∼4.5 GPa and 5.7 GPa. Further, the influence of Ti addition on the structure, elastic constant, and microhardness were estimated from the perspective of the first principle approximation. The special quasi-random structure (SQS) was used for first-principle calculations. The strengthening mechanisms influencing the mechanical properties in these BCC RHEAs were discussed in details. The experimental results were in good agreement with the results pertaining to theoretical modelling, demonstrating the effectiveness of these methods in predicting the structure and mechanical properties of RHEAs.

Local lattice distortions and chemical short-range order in MoNbTaW

Interplay between Lattice Distortions, Vibrations and Phase Stability in NbMoTaW High Entropy Alloys

Short-range order and compositional phase stability in refractory high-entropy alloys via first principles theory and atomistic modelling: NbMoTa, NbMoTaW and VNbMoTaW

Local lattice distortions, phase stability, and mechanical properties of NbMoTaWHf x alloys: A combined theoretical and experimental study

Long-ranged interactions in bcc NbMoTaW high-entropy alloys

Ta-Nb-Mo-W refractory high-entropy alloys: anomalous ordering behavior and its intriguing electronic origin

Prediction of A2 to B2 Phase Transition in the High-Entropy Alloy Mo-Nb-Ta-W

Prediction of A2 to B2 Phase Transition in the High Entropy Alloy MoNbTaW

Temperature dependent phase stability of Mo-Nb-Ta-W refractory high-entropy alloys

Experimental investigation of the local environment and lattice distortion in refractory medium entropy alloys

Solidification Microstructures of V-Nb-Mo-Ta-W Alloys: Insights from Non-equiatomic Alloys

Frustrated metastable-to-equilibrium grain boundary structural transition in NbMoTaW due to segregation and chemical complexity

Competition between phase ordering and phase segregation in the Ti$_x$NbMoTaW and Ti$_x$VNbMoTaW refractory high-entropy alloys

Ordering transformation in Nb 0.8 CoSb induced by in situ heating-induced Nb diffusion

Entropy and Diffuse Scattering: Comparison of NbTiVZr and CrMoNbV

Modeling refractory high-entropy alloys with efficient machine-learned interatomic potentials: Defects and segregation

Atomistic simulation of local chemical order in NbTiZrMoV high entropy alloy based on a newly-developed interatomic potential

Competition between phase ordering and phase segregation in the Ti x NbMoTaW and Ti x VNbMoTaW refractory high-entropy alloys

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

Influence of micro-segregation on the microstructure, and microhardness of MoNbTaxTi(1-x)W refractory high entropy alloys: Experimental and DFT approach