Abstract:In order to explore the all-round influence of nano-SiO2 (NS) and nano-Al2O3 (NA) on cement-based materials, especially the small dosage and compound effect, the single and combined effects of NS and NA on mechanical and durability properties of cement-based materials were investigated. The contents of nanomaterials were 0.5%, 1.0%, 2.0% and 3.0% of the binder by weight, respectively. Results show that setting time could be shortened by introducing NS and NA except single-doped 2% and 3% NA and binary combination NS + NA at 3%. In addition, all hardened mortar systems with nanomaterials exhibited positive strength growth rate compared to control group. Especially, the compressive strength growth rates of mortars containing NS after 3 days were 10.5%, 27.09%, 26.78% and 42.13%, respectively, with the increase of NS content from 0.5% to 3%. In terms of durability, the charge passed, weight loss and capillary permeability coefficient decreased by adding small amount (0.5%) of NS and NA. And then the introducing of 0.5%NS + 0.5%NA powders at 1% reduced capillary permeability coefficient of concrete samples compared to that of 0.5%NS and 0.5%NA samples. Among all groups, the best performance was provided from NS at 1%, NA at 0.5%, and the binary combination NS + NA at 1%. Finally, the relationships between the drying rate/water absorption rate and time were given, which was conductive to study the moisture transport of nano-concrete. ABSTRACT In order to explore the all-round influence of nano-SiO2 (NS) and nano-Al2O3 (NA) on cement-based materials, especially the small dosage and compound effect, the single and combined effects of NS and NA on mechanical and durability properties of cement-based materials were investigated. The contents of nanomaterials were 0.5%, 1.0%, 2.0% and 3.0% of the binder by weight, respectively. Results show that setting time could be shortened by introducing NS and NA except single-doped 2% and 3% NA and binary combination NS + NA at 3%. In addition, all hardened mortar systems with nanomaterials exhibited positive strength growth rate compared to control group. Especially, the compressive strength growth rates of mortars containing NS after 3 days were 10.5%, 27.09%, 26.78% and 42.13%, respectively, with the increase of NS content from 0.5% to 3%. In terms of durability, the charge passed, weight loss and capillary permeability coefficient decreased by adding small amount (0.5%) of NS and NA. And then the introducing of 0.5%NS + 0.5%NA powders at 1% reduced capillary permeability coefficient of concrete samples compared to that of 0.5%NS and 0.5%NA samples. Among all groups, the best performance was provided from NS at 1%, NA at 0.5%, and the binary combination NS + NA at 1%. Finally, the relationships between the drying rate/water absorption rate and time were given, which was conductive to study the moisture transport of nano-concrete.

Research on performance monitoring of binary nano modified concrete based on temperature variation

Residual mechanical properties of concrete incorporated with nano supplementary cementitious materials exposed to elevated temperature

Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges

Optimal Design and Performance of Concrete with Function Component in Marine Environment

The Mechanical Properties and Failure Mechanisms of Steel-Fiber- and Nano-Silica-Modified Crumb Rubber Concrete Subjected to Elevated Temperatures

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Mechanical Modification of Nanomaterials on Fully Saturated Concrete in Groundwater Reservoir Under Long-Term Water Immersion

Evaluation of the mechanical performance of concrete containing calcium carbide residue and nano silica using response surface methodology

A review of high temperature properties of cement based composites: Effects of nano materials

Latest Research Progress on Nano-Engineered Concrete

Mechanical Properties of Hybrid Fibers and Nano Silica Reinforced Concrete During Exposure to Elevated Temperatures

Mechanical Properties and Durability Performance of Concrete Containing Calcium Carbide Residue and Nano Silica

Effect of Nano-SiO2 on the Microstructure and Mechanical Properties of Concrete under High Temperature Conditions

Performance of carbon nanomaterials incorporated with concrete exposed to high temperature

Study on mechanical properties of steel fiber reinforced nano-concrete (SFRNC) after elevated temperature

Experimental Study on Mechanical Properties of Nano-Alumina-Modified Cement Composites Exposed to High Temperatures

Effects of Nano-Sio2 and Nano-Al2o3 on Mechanical and Durability Properties of Cement-Based Materials: A Comparative Study

Insights on the influence of nano-Titanium dioxide and nano-Zinc oxide on mechanical properties and inhibiting of steel reinforcement

A Review of the Effect of Nano-Silica on the Mechanical and Durability Properties of Cementitious Composites

Effect of nano-SiO2 and nano-CaCO3 on the static and dynamic properties of concrete