Abstract:The ballasted track superstructure is characterized by a relative quick deterioration of track geometry due to ballast settlements and the accumulation of sleeper voids. The track zones with the sleeper voids differ from the geometrical irregularities with increased dynamic loading, high vibration, and unfavorable ballast-bed and sleeper contact conditions. This causes the accelerated growth of the inhomogeneous settlements, resulting in maintenance-expensive local instabilities that influence transportation reliability and availability. The recent identification and evaluation of the sleeper support conditions using track-side and on-board monitoring methods can help planning prevention activities to avoid or delay the development of local instabilities such as ballast breakdown, white spots, subgrade defects, etc. The paper presents theoretical and experimental studies that are directed at the development of the methods for sleeper support identification. The distinctive features of the dynamic behavior in the void zone compared to the equivalent geometrical irregularity are identified by numeric simulation using a three-beam dynamic model, taking into account superstructure and rolling stock dynamic interaction. The spectral features in time domain in scalograms and scattergrams are analyzed. Additionally, the theoretical research enabled to determine the similarities and differences of the dynamic interaction from the viewpoint of track-side and on-board measurements. The method of experimental investigation is presented by multipoint track-side measurements of rail-dynamic displacements using high-speed video records and digital imaging correlation (DIC) methods. The method is used to collect the statistical information from different-extent voided zones and the corresponding reference zones without voids. The applied machine learning methods enable the exact recent void identification using the wavelet scattering feature extraction from track-side measurements. A case study of the method application for an on-board measurement shows the moderate results of the recent void identification as well as the potential ways of its improvement.

Layered stiffness detection of ballastless track based on loading force and multiple displacements

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Quantification of Dynamic Track Stiffness Using Machine Learning

Dynamic Response of Railways on Layered Half-Space Subjected to Moving Train Load

Ballasted Track Behaviour Induced by Absent Sleeper Support and its Detection Based on a Convolutional Neural Network Using Track Data

Three-dimensional steady-state response of a railway system on layered half-space soil medium subjected to a moving train

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Image-Aided Analysis of Ballast Particle Movement along a High-Speed Railway

Intelligent identification of differential subgrade settlement of ballastless track system based on vehicle dynamic responses and 1D-CNN approach

Non-coincident contact deformation behavior between double-block ballastless track interlayers under normal load

Advanced Full-Scale Laboratory Dynamic Load Testing of a Ballasted High-Speed Railway Track

Looseness Identification of Track Fasteners Based on Ultra-Weak FBG Sensing Technology and Convolutional Autoencoder Network

A method for support stiffness failure identification in a steel spring floating slab track of urban railway: a case study in China

Vold-Kalman Filter Order tracking of Axle Box Accelerations for Railway Stiffness Assessment

A numerical framework for modelling settlements of railway ballast layers

Intelligent Detection of Surface Defects in High‐Speed Railway Ballastless Track Based on Self‐Attention and Transfer Learning

Mapping Relation between Rail and Bridge Deformation Considering Nonlinear Contact of Interlayer

Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations

Identification of Sleeper Support Conditions Using Mechanical Model Supported Data-Driven Approach

Degraded Ballast Stiffness Characterization Using Bender Element Field Sensor and PANDA® Penetrometer