Abstract:The location of people, robots, and Internet-of-Things (IoT) devices has become increasingly important. Among the available location technologies, solutions based on ultrawideband (UWB) radio are having much success due to their accuracy, which is ideally at a centimeter level. However, this accuracy is degraded in most common indoor environments due to the presence of obstacles which block or reflect the radio signals used for ranging. One way to circumvent this difficulty is through robust estimation algorithms based on measurement redundancy, permitting to minimize the effect of significantly erroneous ranges (outliers). This need for redundancy often conflicts with hardware restraints put up by the location system's designers. In this work, we present a procedure to increase the redundancy of UWB systems and demonstrate it with the help of a commercial system made by Decawave. This system is particularly easy to deploy, by configuring a network of beacons (anchors) and devices (tags) to be located; however, its architecture presents a major disadvantage as each tag to be located can only measure ranges to a maximum of four anchors. This limitation is embedded in the Positioning and Networking Stack (PANS) protocol designed by Decawave, and therefore is not easy to bypass without a total redesign of the firmware. In this paper, we analyze the strategies that we have been able to identify in order to provide this equipment with multiple range measurements, and thus enable each tag to be positioned with more than four measured ranges. We will see the advantages and disadvantages of each of these strategies, and finally we will adopt a solution that we implemented to be able to measure up to eight ranges for each mobile device (tag). This solution implies the duplication of the tags at the mobile user, and the creation of a double interleaved network of anchors. The range among tags and the eight beacons is obtained through an API via a wireless BLE protocol at a 10 Hz rate. A robustified Extended Kalman filter (EKF) is designed to estimate, by trilateration, the position of the pair of mobile tags, using eight ranges. Two different scenarios are used to make localization experimentation: a laboratory and an apartment. Our position estimation, which exploits redundant information and performs outlier removal, is compared with the commercial solution limited to four ranges, demonstrating the need and advantages of our multi-range approach.

A Robust Indoor Pedestrian Localization Approach Against Human Body Shadowing for UWB-Enabled Smartphones

Robust IMU-Based Mitigation of Human Body Shadowing in UWB Indoor Positioning

Pedestrian Localization with Stride-Wise Error Estimation and Compensation by Fusion of UWB and IMU Data

A UWB/Improved PDR Integration Algorithm Applied to Dynamic Indoor Positioning for Pedestrians

Map-aided and UWB-based Anchor Placement Method in Indoor Localization

UWB-Assisted Bluetooth Localization Using Regression Models and Multi-Scan Processing

Virtual Wireless Device-Constrained Robust Extended Kalman Filters for Smartphone Positioning in Indoor Corridor Environment

Anchor Self-Localization Algorithm Based on UWB Ranging and Inertial Measurements

A Dynamic Window-Based UWB-Odometer Fusion Approach for Indoor Positioning

A Reliable and Efficient UWB-Based Indoor Localization Scheme.

Improving the Accuracy of Decawave's UWB MDEK1001 Location System by Gaining Access to Multiple Ranges

Global UWB System: A High-Accuracy Mobile Robot Localization System With Tightly Coupled Integration

An Indoor Positioning Method Based on UWB and Visual Fusion

A Novel Method for UWB-based Localization Using Fewer Anchors in a Floor with Multiple Rooms and Corridors.

Towards Robust and Efficient Device-Free Localization Using UWB Sensor Network

A CSI-Based Indoor Positioning System Using Single UWB Ranging Correction.

Tightly-Coupled Vehicle Positioning Method at Intersections Aided by UWB.

Multipath-Assisted Single-Anchor Localization Via Deep Variational Learning

An UWB-based Indoor Coplanar Localization and Anchor Placement Optimization Method

Single UWB Anchor Aided PDR Heading and Step Length Correcting Indoor Localization System

Robust Localization for Mobile Targets Along a Narrow Path With LoS/NLoS Interference