Abstract:Calcium phosphate, particularly hydroxyapatite (HA), bears a close resemblance to human bones, rendering it a prevalent material in biomedical applications. This study focuses on the successful preparation of HA using a precipitation method with eggshell as a raw material. Subsequently, the HA powder was press-formed and sintered at various temperatures to investigate the impact of sintering temperature on the mechanical properties, including hardness, compressive strength, and fracture toughness, of the sintered HA samples (E-HA). Statistical analyses, including one-way ANOVA and Tukey's post-hoc test, were conducted to determine significant differences in these properties at different sintering temperatures. Experimental findings revealed that as the sintering temperature increased, HA partially transformed into β-TCP between 800 and 1300 °C, with α-TCP observed at 1400 °C. The elimination of pores led to an increase in relative density, with a maximum relative density of 94.5% achieved at 1200 and 1300 °C. E-HA sintered at 1200 °C exhibited the highest hardness (5.08 GPa), compressive strength (255.79 MPa), and fracture toughness (1.21 MPa·m0.5). However, at 1400 °C, a slight decrease in apparent density (2.90 g/cm3) was noted due to the presence of α-TCP, along with significant grain growth. This study's objective is clearly aligned with the study design, incorporating detailed statistical analyses to validate the findings. Furthermore, bacterial culture experiments were conducted using sintered E-HA, Chem-HA (HA synthesized from reagent-grade calcium carbonate), and Comm-HA (commercial HA). Streptococcus mutans was cultured on the surfaces of sintered E-HA, Chem-HA, and Comm-HA samples for 20 h. After culturing, the OD values for all samples were below 0.2, indicating significant antibacterial efficacy. The comparable OD values and bacterial counts (p > 0.05) suggest that the source of HA does not impact its antibacterial properties. This underscores the potential of eggshell-derived HA as an effective material for biomedical applications.

Hydroxyapatite and pore former effects on the microstructure and mechanical strength of porous pellets loaded with Lactobacillus

Structure reinforcement of porous hydroxyapatite pellets using sodium carbonate as sintering aid: Microstructure, secondary phases and mechanical properties

Powder Loading Effects on the Physicochemical and Mechanical Properties of 3D Printed Poly Lactic Acid/Hydroxyapatite Biocomposites

Effect of Filler Content on the Morphology and Physical Properties of Poly(Lactic Acid)-Hydroxyapatite Composites

Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite

Biological Efficacy of Modified Structure of Polymer Surfaces for Bone Substitute

The Effect of Pore Size Distribution and l-Lysine Modified Apatite Whiskers (HAP) on Osteoblasts Response in PLLA/HAP Foam Scaffolds Obtained in the Thermally Induced Phase Separation Process

Fabrication and Mineralization of Poly (propylene Fumarate)/Hydroxyapatite Porous Hydrogels

Effect of Sintering on Porosity, Phase, and Surface Morphology of Spray Dried Hydroxyapatite Microspheres

Effects of degradation and porosity on the load bearing properties of model hydroxyapatite bone scaffolds

Morphology, Deformation, and Micromechanical Behavior of Electrospun Nano‐hydroxyapatite Blended Biohybrid Scaffolds

Phase Transformation and Mechanical Optimization of Eggshell-Derived Hydroxyapatite across a Wide Sintering Temperature Range

Effect of hydroxyapatite size on properties of PBS-DLS/HAp composites obtained by twin-screw extrusion and injection moulding techniques

The combined effects of binder addition and different sintering methods on the mechanical properties of bovine hydroxyapatite

Study of the suitability of a commercial hydroxyapatite powder to obtain sintered compacts for medical applications

Mechanical Properties and in Vitro Evaluation of Bioactivity and Degradation of Dexamethasone-Releasing Poly-D-l-lactide/nano-hydroxyapatite Composite Scaffolds

Sol-Gel Synthesis and Characterisation of Nano-sized Hydroxyapatite Powders and Hydroxyapatite/ Poly(D,L-lactide-co-glycolide) Composite Scaffolds

Hierarchically nanostructured hydroxyapatite microspheres as drug delivery carriers and their effects on cell viability

Preparation and Biocompatibility of Nanoscaled La/Ag/HAP Powder

The Effect of Oxygen Plasma Pretreatment and Incubation in Modified Simulated Body Fluids on the Formation of Bone-Like Apatite on Poly(lactide-Co-glycolide) (70/30)

Fabrication and Characteristics of Porous Hydroxyapatite-CaO Composite Nanofibers for Biomedical Applications