Treatment of leachate concentrate by electrocoagulation coupled with electro-Fenton-like process: Efficacy and mechanism

Jing Ding,Miao Jiang,Guanshu Zhao,Liangliang Wei,Sining Wang,Qingliang Zhao
DOI: https://doi.org/10.1016/j.seppur.2020.117668
IF: 8.6
2021-01-01
Separation and Purification Technology
Abstract:<p>The efficient treatment of leachate concentrate is a key issue in the application of membrane technology to leachate treatment. Here a process coupling electrocoagulation with an electro-Fenton-like process was developed and tested for the treatment of leachate concentrate using a dual-anode system. The effects of pH, electrode gap, electrical charge, and suspended solids on the performance of organics and ammonia removal were evaluated with leachate concentrates from a municipal waste incineration facility. 57% of the organics and 60% of the ammonia were removed at the electrical charge of 7Ah/L, the potential of 7 V, and pH of 7. Electro-oxidation by hypochlorite ions generated <em>in situ</em>, electrocoagulation and electro-Fenton-like reaction via hypochlorite and ferrous ions achieved the removal. Higher levels of suspended solids and a smaller electrode gap both benefitted the removal of organics. Most of the fulvic acid and humic acid-like substances in the concentrate were removed, with the treatment effectiveness following the order coupled process &gt; electro-Fenton-like process &gt; electrocoagulation process. This coupled process shows an alternative potential as a preliminary process in the treatment of leachate concentrates.</p>
engineering, chemical
What problem does this paper attempt to address?
The paper aims to address the efficient treatment of leachate concentrate (LC). Specifically, the study developed a method combining electrocoagulation (EC) with an Electro-Fenton-like (EF-like) process and tested this method using a dual-anode system. ### Main Objectives of the Study: 1. **Develop Combined Process**: Develop a new method combining electrocoagulation with an Electro-Fenton-like process (referred to as the EC/EF-like process). 2. **Optimize Operating Parameters**: Optimize operating parameters affecting wastewater characteristics and precipitate changes, such as pH, voltage, and electrode gap. 3. **Propose Reaction Mechanism**: Propose the reaction mechanism for pollutant removal in the EC/EF-like process. ### Specific Issues Addressed: - **Organic Matter Removal**: The study investigated the removal efficiency of organic matter under different conditions, finding that the optimal pH is neutral or slightly acidic, and the increase in suspended solids (SS) aids in the removal of organic matter. - **Ammonia Nitrogen Removal**: The removal rate of ammonia nitrogen is not affected by pH but is influenced by the competitive effect of organic matter concentration. - **Energy Consumption**: The study examined the energy consumption for organic matter removal at different voltages, finding that higher voltages can improve removal efficiency but also increase energy consumption. - **Precipitate Characteristics**: The precipitates formed were analyzed using X-ray diffraction (XRD), indicating that iron ions mainly precipitate in the form of iron oxides. - **By-product Formation**: The study investigated the halogenated by-products (such as THMs, DCAN, etc.) produced during the electrochemical process and discussed the pathways for their elimination. ### Main Conclusions: - The EC/EF-like process outperforms standalone EC or EF-like processes in removing organic matter and ammonia nitrogen. - Neutral pH is the optimal operating condition, avoiding the need for additional pH adjustment. - The presence of suspended solids aids in the removal of organic matter but has a minor effect on ammonia nitrogen removal. - High voltage increases removal efficiency but also raises energy consumption. - The precipitates formed are mainly composed of iron oxides, with more pronounced crystal formation under alkaline conditions. - The formation of by-products can be reduced by extending the electrolysis time, but further process optimization is needed to minimize by-product generation.