Abstract:Liquid crystal small molecules (LCSMs) are manifested as the effective additives to regulate the morphology of active layers and elevate the performance of ternary organic solar cells (TOSCs) in fullerene systems. However, the current studies for TOSCs based on efficient LCSMs are most out of the LC phase transition temperature, which is not conducive to accurately disclosure the effect of LCSMs on the morphology evolution. Besides, the inner working mechanism of LCSMs has not been investigated systematically and in-depth. Herein, a structurally simple donor–acceptor–donor type LCSM DFBT-TT6 with a low liquid crystal phase transition temperature is utilized as the third component to construct TOSCs based on a highly efficient nonfullerene system PM6:Y6. To unveil the work mechanism of LCSMs on the TOSCs performance and eliminate other interferences simultaneously, a structurally similar non-LCSM DFBT-DT6 with a low glass-transition temperature is further synthesized for a more clear comparison. Interestingly, the addition of DFBT-TT6 can delicately control the crystallinity and phase separation of PM6:Y6, rendering the optimized morphology with only 3 wt % DFBT-TT6. In contrast, the non-LCSM DFBT-DT6 shows a negligible effect on morphology regulation, indicating the unique ability of LC molecules in morphology control. The underlying working mechanism is revealed by the combined study of miscibility and the wetting coefficient of the blends, elucidating that the LCSM DFBT-TT6 has good compatibility with PM6 and Y6. Therefore, DFBT-TT6 is more prone to being located at the interface of PM6 and Y6, and it is energetically favorable for charge transfer. The aforementioned favorable morphology evolution is associated with improved crystallinity, phase separation, charge transfer, exciton dissociation, and collection efficiency, ultimately boosting the power conversion efficiency of TOSCs from 15.76% to 17.05% with a remarkable short-circuit current density of 26.56 mA/cm<sup>2</sup>. This work not only offers deep insight into the LCSM induced morphology evolution but also puts forward an affordable strategy to achieve high-performance TOSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c04297?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c04297</a>.Instruments, solar cell characterization, SCLC measurement, GIWAXS, DSC, water contact angle measurement, fs-TA, AFM, and spectral charts of NMR and MS (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c04297/suppl_file/cm0c04297_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

All-Tunicate Cellulose Film with Good Light Management Properties for High-Efficiency Organic Solar Cells

A cellulose-based light-management film incorporated with benzoxazine resin/tannic acid exhibiting UV/blue light double blocking and enhanced mechanical property

Construction of -FeOOH@tunicate cellulose nanocomposite hydrogels and their highly efficient photocatalytic properties

Construction of β-FeOOH@tunicate cellulose nanocomposite hydrogels and their highly efficient photocatalytic properties

Fabrication of transparent and hazy cellulosic light-management film for enhancing photon utilization in photocatalytic membrane process

Multi‐component Copolymerized Donors enable Frozen Nano‐morphology and Superior Ductility for Efficient Binary Organic Solar Cells

Enabling High‐Efficiency and Stable Binary Organic Solar Cells by Solid Additive‐Assisted Morphology Modulation

High‐Performance Green Thick‐Film Ternary Organic Solar Cells Enabled by Crystallinity Regulation

Regulating Favorable Morphology Evolution by a Simple Liquid-Crystalline Small Molecule Enables Organic Solar Cells with over 17% Efficiency and a Remarkable Jsc of 26.56 Ma/cm2

Regulating Favorable Morphology Evolution by a Simple Liquid-Crystalline Small Molecule Enables Organic Solar Cells with over 17% Efficiency and a Remarkable J sc of 26.56 mA/cm 2

Enhanced efficiency of organic solar cells through trans-cinnamic acid doped cathode interface layer

A partial dissolution-regeneration strategy for preparing water-resistant composite film of cellulose I and cellulose II with high light transmittance and adjustable haze

2D/1a Strategy to Regulate Film Morphology for Efficient and Stable Nonfullerene Organic Solar Cells

Achieving the low interfacial tension by balancing crystallization and film-forming ability of the cathode interlayer for organic solar cells

Self-Organized Cholesteric Liquid Crystal Polymer Films with Tunable Photonic Band Gap As Transparent and Flexible Back-Reflectors for Dye-Sensitized Solar Cells

Molecular Weight-regulated Sequential Deposition Strategy Enables Semitransparent Organic Solar Cells with Light Utilization Efficiency over 5%

Highly Efficient Organic Solar Cells with Improved Stability Enabled by Ternary Copolymers with Antioxidant Side Chains

Designing flexible CNT/CNF films with highly light-absorbing for solar energy harvesting: Seawater desalination, photothermal power generation and light- driven actuators

Enhancing Mechanical Durability and Long‐Term Stability in Organic Solar Cells via Flexible Linker‐Sequential Block Copolymerized Donors

High performance opaque and semi-transparent organic solar cells with good tolerance to film thickness realized by a unique solid additive

Optimizing Molecular Packing and Film Morphology in Organic Solar Cells via Additive‐Modulated Growth Processes