Abstract:Background: Unexpected performance degradation occurs in wind turbine blades due to leading edge defect when suffering from continuous impacts with rain drops, hails, insects, or solid particles during its operation life. To assess this issue, this paper numerically investigates the steady and dynamic stall characteristics of an S809 airfoil with various leading edge defects. More leading edge defect sizes and much closer to practical parameters are investigated in the paper. Methodology: Numerical computation is conducted using the SST k-ω turbulence model, and the method has been validated by comparison with existed published data. In order to ensure the calculation convergence, the residuals for the continuity equation are set to be less than 10-7 and 10-6 in steady state and dynamic stall cases. The simulations are conducted with the software ANSYS Fluent 13.0. Results: It is found that the characteristics of aerodynamic coefficients and flow fields are sensitive to leading edge defect both in steady and dynamic conditions. For airfoils with the defect thickness of 6%tc, leading edge defect has a relative small influence on the aerodynamics of S809 airfoil. For other investigated defect thicknesses, leading edge defect has much greater influence on the flow field structures, pressure coefficients and aerodynamic characteristics of airfoil at relative small defect lengths. For example, the lift coefficients decrease and drag coefficients increase sharply after the appearance of leading edge defect. However, the aerodynamic characteristics could reach a constant value when the defect length is large enough. The flow field, pressure coefficient distribution and aerodynamic coefficients do not change a lot when the defect lengths reach to 0.5%c,1%c, 2%c and 3%c with defect thicknesses of 6%tc, 12%tc,18%tc and 25%tc, respectively. In addition, the results also show that the critical defect length/thickness ratio is 0.5, beyond which the aerodynamic characteristics nearly remain unchanged. In dynamic stall, leading edge defect imposes a greater influence on the aerodynamic characteristics of airfoil than steady conditions. By increasing in defect length, it is found that the separated area becomes more intense and moves forward along the suction surface. Conclusions: Leading edge defect has significant influence on the aerodynamic and flow characteristics of the airfoil, which will reach a stable status with enough large defect size. The leading edge separation bubble, circulation in the defect cavity and intense tailing edge vortex are the main features of flow around defective airfoils.

Aerodynamic characteristic of wind turbine with the leading edge slat and Microtab

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Flow Separation Control and Aeroacoustic Effects of a Leading-Edge Slat over a Wind Turbine Blade

The effects of the dual control method on the aerodynamic characteristics of the wind turbine blade

Stall control on the wind turbine airfoil via the single and dual-channel of combining bowing and suction technique

Improvement of NACA6309 Airfoil with Passive Air-Flow Control by using Trailing Edge Flap

Comparative study of two combined blowing and suction flow control methods on pitching airfoils

Experimental Validation of a Passive-Adaptive Slat Concept and Characterization under Sinusoidal Fluctuations in the Angle of Attack

Numerical study on technical and conceptual improvements to a civil aircraft trailing-edge flap using passive/active flow control

Experimental and numerical analysis of NREL S823 airfoil with auxiliary airfoil integration

Numerical Evaluations Of The Effect Of Leading-Edge Protuberances On The Static And Dynamic Stall Characteristics Of An Airfoil

Numerical Investigation on the Aerodynamic Performance of an Airfoil with Leading-Edge Protuberances

Impact of Leading-Edge Tubercles on Airfoil Aerodynamic Performance and Flow Patterns at Different Reynolds Numbers

Noise Control for High-Lift Devices by Slat Wall Treatment

Numerical study of the aerodynamic effects of bio-inspired leading-edge serrations on a heaving wing at a low Reynolds number

The Effect of Fsti to the Combined Separation Control Strategy of Surface Roughness with Upstream Wakes

Investigation of leading-edge protuberances for the performance improvement of thick wind turbine airfoil1

Effects of Leading Edge Defect on the Aerodynamic and Flow Characteristics of an S809 Airfoil

Detached-eddy Simulation of Flow Past a Pitching NACA 0015 Airfoil with Pulsed Actuation

Effects of Simulated Surface Roughness on Flow Characteristics in Symmetrical Airfoil

Enhancement of aerodynamic performance of a heaving airfoil using synthetic-jet based active flow control