Abstract:The concept of computer-aided design/computer aided manufacturing (CAD/CAM) was first mentioned decades ago in the field of dentistry. The technology to make dental restorations has found wide application recently and developed rapidly in prosthodontics and oral implantology, for it could save patients' time and manpower, have precision on prostheses' edging, etc. Until now there are several commercial CAD/CAM systems on market. With the use of CAD/CAM technology in dentistry, it has broken the traditional pattern of making dentures manually. Meanwhile, it brings opportunity for material science. The machinable/milled materials in dentistry should have not only excellent biocompatibility, but also machining and physical properties. Both of them are important. Nowadays, a great number of blocks are made from feldspar ceramics, glass-ceramics, alumina oxide, zirconium oxide, titanium, composite materials, wax and so on. Lots of researchers have had their focus on metal-free materials, because it can make the restorations look more natural and not show the inside metal color. However, strength like feldspar ceramics has its own disadvantages. It has strict indications, otherwise the restoration may fail. The technique called In-Ceram has been used long time ago. It also has long clinical experience and excellent long-term prognosis. People have explored this technique in CAD/CAM restorations. Studies have manifested that it can be utilized this way. At first, alumina was milled with pores; then, glass was infiltrated to the milled material. After zirconia had its success used in orthopedics, it became more and more popular to investigate whether this stuff was suitable in dentistry or not. Luckily, it has been proved adaptable for making single crown in posterior area, fixed partial dentures, in particular, and milling it using CAM equipment, due to the partially sintered block's hardness like chalk. Several milled polymer materials are made for temporary crowns or bridges. In recent years, because of the phenomenon about microleakage of the direct filling composite resin intraoral, indirect filling method, inlay, by the adhesive agent has bonded the tooth tissue and the material to eliminate the microleakage. It is the chemical bonding. As a result of this, maybe composite material made inlay will be prospective. As the aging phenomenon of the polymers are inevitable, and the resin matrix are polymers, it is not suitable for cosmetic restorations. Metal materials for CAD/CAM have some commercial products. But few scholars do the studies about it. In this article you will find that many investigators abroad do the research about the commercial blocks on their physical and clinical study. On the other hand, domestic scholars pay attention to the basis of the material research. It provides the overview of the materials for CAD/CAM in dentistry.

Microstructural investigation of hybrid CAD/CAM restorative dental materials by micro-CT and SEM

Microstructural investigation of hybrid CAD/CAM restorative dental materials by micro-CT and SEM

On the Mechanical Properties of Hybrid Dental Materials for CAD/CAM Restorations

Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses

Three-dimensional finite element modelling of all-ceramic restorations based on micro-CT

Printable and Machinable Dental Restorative Composites for CAD/CAM Application-Comparison of Mechanical Properties, Fractographic, Texture and Fractal Dimension Analysis

Fracture Toughness Analysis of Ceramic and Resin Composite CAD/CAM Material

Evaluation of Physical–Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition "Multicolor"

From Artisanal to CAD-CAM Blocks

Comparative Analysis of Modern 3D-Printed Hybrid Resin-Ceramic Materials for Indirect Restorations: An In Vitro Study

[Research Progress of Dental Machinable Materials].

Additive manufacturing trueness and internal fit of crowns in resin modified with a commercially available ceramic composite concentrate

Mechanical behavior of CAD/CAM occlusal ceramic reconstruction assessed by digital color holography.

Physico-mechanical properties and bacterial adhesion of resin composite CAD/CAM blocks: An in-vitro study

Evaluation of optical and mechanical properties of crown materials produced by 3D printing

Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study

Review on Polymer, Ceramic and Composite Materials for CAD/CAM Indirect Restorations in Dentistry—Application, Mechanical Characteristics and Comparison

Microstructural and flexural strength of various CAD-CAM lithium disilicate ceramics

Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study

Fracture strength test of digitally produced ceramic-filled and unfilled dental resin restorations via 3d printing: An in vitro study

Exploring the optical behavior and relative translucency parameter of CAD-CAM resin-based composites, polymer-infiltrated ceramic network, and feldspar porcelain