Abstract:Zinc oxide (ZnO) thin films have been grown by radio frequency sputtering technique on fused silica substrates. Optical and morphological characteristics of as-grown ZnO samples were measured by various techniques; an X-ray diffraction spectrum showed that the films exhibited hexagonal wurtzite structure and were c-axis-oriented normal to the substrate surface. Scanning electron microscopy images showed the dense columnar structure of the ZnO layers, and light absorption measurements allowed us to estimate the penetration depth of the optical radiation in the 200 to 480 nm wavelength range and the ZnO band-gap. ZnO layers were used as a basic material for surface acoustic wave (SAW) delay lines consisting of two Al interdigitated transducers (IDTs) photolithographically implemented on the surface of the piezoelectric layer. The Rayleigh wave propagation characteristics were tested in darkness and under incident UV light illumination from the top surface of the ZnO layer and from the fused silica/ZnO interface. The sensor response, i.e., the wave velocity shift due to the acoustoelectric interaction between the photogenerated charge carriers and the electric potential associated with the acoustic wave, was measured for different UV power densities. The reversibility and repeatability of the sensor responses were assessed. The time response of the UV sensor showed a rise time and a recovery time of about 10 and 13 s, respectively, and a sensitivity of about 318 and 341 ppm/(mW/cm2) for top and bottom illumination, respectively. The ZnO/fused silica-based SAW UV sensors can be interrogated across the fused silica substrate thanks to its optical transparency in the UV range. The backlighting interrogation can find applications in harsh environments, as it prevents the sensing photoconductive layer from aggressive environmental effects or from any damage caused by cleaning the surface from dust which could deteriorate the sensor's performance. Moreover, since the SAW sensors, by their operating principle, are suitable for wireless reading via radio signals, the ZnO/fused-silica-based sensors have the potential to be the first choice for UV sensing in harsh environments.

Industrial Waste Residue Converted into Value-Added ZnO for Optoelectronic Applications

Largely Enhanced Efficiency In Zno Nanowire/P-Polymer Hybridized Inorganic/Organic Ultraviolet Light-Emitting Diode By Piezo-Phototronic Effect

Low-cost fabrication methods of ZnO nanorods and their physical and photoelectrochemical properties for optoelectronic applications

High UV and Sunlight Photocatalytic Performance of Porous ZnO Nanostructures Synthesized by a Facile and Fast Microwave Hydrothermal Method

Integrated Ultraviolet Sensor Using Zinc Oxide Nanorods by Ac-Electric-Filed-Assisted Growth Method

Enhanced ultraviolet photodetection with Ag nanoparticle-decorated ZnO nanowires and core-shell electrodes

Thermal-desorption Induced Enhancement and Patterning of Ultraviolet Emission in Chemically Grown ZnO

Immobilisation of ZnO nanoparticles on carbon and on glass fibres for visible light photocatalytic applications

Development of ZnO and Si Semiconductor-Based Ultraviolet Photodetectors Enhanced by Laser-Ablated Silver Nanoparticles

The Fast and One-Step Growth of ZnO Nanorods on Cellulose Nanofibers for Highly Sensitive Photosensors

Toward Industrial Production of a High-Performance Self-Powered Ultraviolet Photodetector Using Nanoporous Al-Doped ZnO Thin Films

Facile Fabrication of UV Photodetectors Using Spin-Coating Flame-Synthesized ZnO Nanoparticles

Nanostructural Design of ZnO Using an Agro-Waste Extract for a Sustainable Process and Its Photocatalytic Activity

Focused Ion Beam Exposed Zinc Acetate Films for Preparation of Highly Sensitive Ultraviolet Photodetectors

Low‐Temperature Water‐Assisted Oxidation of Sponge‐Like Zn Nanostructures for Environmental and Energy Harvesting Applications

High-performance UV photodetection of unique ZnO nanowires from zinc carbonate hydroxide nanobelts.

UV Sensor Based on Surface Acoustic Waves in ZnO/Fused Silica

Enhanced Photocatalytic Performance under Ultraviolet and Visible Light Illumination of ZnO Thin Films Prepared by Modified Sol-Gel Method

Sponge-templated Production of Ultra-Thin ZnO Nanosheets for Printed Ultraviolet Photodetectors

OBTAINING ZINC OXIDE NANORODS BY HYDROTHERMAL METHOD

Structural and morphology of ZnO nanorods synthesized using ZnO seeded growth hydrothermal method and its properties as UV sensing