Abstract:Abstract With the continuous upgrading of infrastructure construction and the gradual development of theoretical research about engineering construction, higher performance requirements have been put forward for concrete materials. Therefore, to meet the engineering quality requirements of various concrete structures, the research direction of engineering materials has shifted towards developing new concrete with high strength, high ductility, high toughness, and other multifunctional properties. Mixing two or more types of fibers with conductive properties with the cement matrix material allows various fibers to leverage their strengths and weaknesses, thereby utilizing their respective characteristics. This results in the formation of a complex-phase conductive fiber cementitious material (CFCM), which enhances the safety, durability, and toughness of the structure. It enables the engineering structure to exhibit intelligence and resourcefulness, thereby improving its service life and reducing the full life cycle cost of the cementitious material structure. Additionally, this approach relatively eases the demand for concrete materials and reduces material consumption. This method represents one of the research directions for new concrete. Complex-phase CFCMs are essentially smart materials capable of sensing not only compressive or tensile stresses but also temperature. The emergence of CFCM represents a significant step forward in enhancing the mechanics, functionality, and sustainability of modern infrastructure. In this experiment, an orthogonal test involving 16 working conditions with three factors and four levels was designed, with steel fiber (SF) type, SF content, and carbon fiber (CF) content as the factors. The study focused on the physical and mechanical properties of composite conductive fiber cement-based materials containing both SF and CF. Performance indicators such as flexural strength, volume resistivity, and energized temperature rise of the composite conductive fiber cement-based materials were tested. The analysis of orthogonal tests produced the following results regarding the degree of influence of each factor on the mechanical and physical properties: the order of influence on flexural strength was SF doping > SF type > CF doping. Further analysis revealed that the best combination was A 4 B 4 C 4. The relationship between the effect of each factor on resistivity is as follows: carbon fiber doping > SF doping > SF type. Comparing the weights between the levels, it can be observed that the optimal combination of conductivity schemes is also A 3 B 4 C 4. SF and CFs, respectively, enhanced the mechanical and physical properties of complex-phase conductive fiber cementitious materials. The results of the temperature rise test on cementitious materials concluded that there is a certain relationship between the temperature rise and electrical conductivity. Specifically, the higher the electrical conductivity, the greater the temperature rise observed. Through orthogonal analysis of electrical conductivity, disregarding the effect of the non-significant influence factor SF type on the conductive heating test, the impact of two factors, CF doping and SF doping, on the heating test was investigated under 16 sets of conditions, and the data were analyzed visually. The optimal mix ratio for the test is A 3 B 4 C 4, determined through comprehensive optimization of orthogonal and intuitive analyses. This means that the optimal physico-mechanical properties are achieved when using copper-plated SFs, with a SF dosage of 1.25% and a CF dosage of 0.48%. As a preceding study in the field of intelligent concrete, this experiment explores the research path of intelligent concrete, which holds positive significance for subsequent, more intricate research endeavors.

Preparation and Long-Term Stability Study of Steel Fiber/Graphite Conductive Concrete

Preparation of steel fiber/graphite conductive concrete for grounding in substation

Conductivity and mechanical properties study of steel fiber reinforced graphite conductive concrete

Preparation and Properties of Carbon Fiber/Flexible Graphite Composite Grounding Material

Study on Strength and Conductivity of Graphite and Carbon Fiber Concrete

A Study on Electro-Magnetic Properties of Concrete by Using Steel Fiber and Graphite

Preparation of carbon fiber conductive concrete and study on its mechanical and heating properties

Research and Development of Steel Fiber Reinforced Concrete Filling Material and Its Application in Gob-Side Entry Retaining Technology in Deep Mines

Properties of grounding system adopting reinforced steel in concrete

Foundation Froperties of Graphite Filled Cement Conductive Composites

Study on physical and mechanical properties of complex-phase conductive fiber cementitious materials

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Experiment on mechanical properties of steel fiber reinforced concrete and application in deep underground engineering

Long Age Mechanical Properties and Application of Self-Compacting Concrete

Properties of self-compacting concrete and its application in nuclear power project

Preparation of Conductive Asphalt Concrete Based on the Action Mechanism of Conductive Phase Materials

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Study on electrical, thermal, mechanical and corrosion resistance properties of conductive silicone rubber for polymer-based metal composite grounding electrodes

Preparation of a novel foamed concrete modified with carbon fiber and graphite: Mechanical, electro-magnetic and microstructural characteristics based on X-CT

Macro-galvanic corrosion of tower grounding device consisting of graphite and Zn-coated steel in a simulated soil environment