Abstract:Many recent biomedical applications use medium-power frequency-tunable terahertz (THz) sources, such as sensitivity-enhanced nuclear magnetic resonance, THz imaging, and biomedical treatment. As a promising candidate, a low-voltage gyrotron can generate watt-level, continuous THz-wave radiation. In particular, the frequency-pulling effect in a gyrotron, namely, the effect of the electron beam parameters on the oscillation frequency, can be used to tune the operating frequency. Most previous investigations used complicated and time-consuming gyrotron nonlinear theory to study the influence of many beam parameters on the interaction performance. While gyrotron linear theory investigation demonstrates the advantages of rapidly and clearly revealing the physical influence of individual key beam parameters on the overall system performance, this paper demonstrates systematically the use of gyrotron linear theory to study the frequency-pulling effect in a low-voltage gyrotron with either a Gaussian or a sinusoidal axial-field profile. Furthermore, simulations of a gyrotron operating in the first axial mode are carried out in the framework of nonlinear theory as a contrast. Close agreement is achieved between the two theories. Besides, some interesting results are obtained. In a low-current sinusoidal-profile cavity, the ranges of frequency variation for different axial modes are isolated from each other, and the frequency tuning bandwidth for each axial mode increases by increasing either the beam voltage or pitch factor. Lowering the voltage, the total tuning ranges are squeezed and become concentrated. However, the isolated frequency regions of each axial mode cannot be linked up unless the beam current is increased, meaning that higher current operation is the key to achieving a wider and continuous tuning frequency range. The results presented in this paper can provide a reference for designing a broadband low-voltage gyrotron.

Investigation of the Alignment Method for High-Frequency Gyrotrons

Influence of Misalignment on the Behavior of Electron Beam of an 800 GHz Gyrotron

Theoretical and experimental investigation on the effect of beam misalignment on a second harmonic 0.8 THz gyrotron

Linear and Saturated Behaviors of Gyrotron Oscillator With a Misaligned Electron Beam

Controllable Thermal-Frequency Tuning of a Terahertz Gyrotron

A 0.33-Thz Second-Harmonic Frequency-Tunable Gyrotron

Study On A High-Efficiency Low-Voltage Tunable Terahertz Gyrotron

Numerical study of a high-harmonic gyrotron using an axis-encircling electron beam

Design and Experiment on a 95-GHz 400 kW-Level Gyrotron

Numerical and Experimental Verification of a Pulsed Magnet for an 800-GHz Gyrotron

Design of a 1-THz Fourth-Harmonic Gyrotron Driven by Axis-Encircling Electron Beam

Design of a High-Harmonic Gyrotron with a Permanent Magnet System

Electronic-Tuning Frequency Stabilization of a Terahertz Gyrotron Oscillator

The Design of A Multi-Harmonic Step-Tunable Gyrotron

Multiphysics Modeling and Thermal-Frequency Tuning of THz Gyrotron Devices

Investigation of a 0.34-THz Quasi-Optical Gyrotron Traveling Wave Amplifier

Experimental Study on Continuous Frequency Tuning of a Second-Harmonic 800-GHz Gyrotron

Development of a High-Harmonics Gyrotron Based on Large-Orbit Gun

Frequency Pulling in a Low-Voltage Medium-Power Gyrotron

Development of a Terahertz Harmonic Gyrotron

Design of a 330-GHz Frequency-Tunable Gyrotron With a Prebunched Circuit