Abstract:The synthesis of 2-methylfuran from biomass-based furfural is valuable in terms of addressing current environmental problems and energy crises. In this work, a series of Cu- and Cu-Re-based catalysts were prepared by the incipient wetness impregnation method and applied for the selective transfer hydrogenation of furfural to the fuel additive 2-methylfuran (2-MF) with the use of isopropanol as the hydrogen donor and solvent. The results showed that the SCu3Re/Al2O3 catalyst served as an effective multifunctional catalyst for the dehydrogenation, transfer hydrogenation, and hydrogenolysis reaction steps in the transfer hydrogenation process, exhibiting a 94.0% yield of 2-MF with a high selectivity after 4 h at 220 degrees C; additionally, this catalyst could be reused at least five times without an obvious drop in activity and the formation rate of 2-MF. The superior performance of the bimetallic CuRe/Al2O3 catalyst could be attributed to the synergy of the Al2O3 support, metallic Cu and Re species, in which Al2O3 with abundant acid-base sites and large specific surface area enabled the transfer hydrogenation process; the introduction of Cu on the Al(2)O(3 )surface enhanced the dehydrogenation of isopropanol and the hydrogenation of furfural into furfuryl alcohol, while the modification with Re species promoted the further hydrogenolysis of furfuryl alcohol into 2-MR Moreover, the strong interaction of ReOx with Cu and Al(2)O(3 )resulted in the high stability of the bimetallic CuRe/Al2O3 catalyst. The present work provided an efficient and stable catalytic system for biomass-related hydrogenation reactions without any external hydrogen supply.

Direct Hydrogenation of Furfural to 2-Methyltetrahydrofuran over an Efficient Cu–Pd/HY Bimetallic Catalyst

Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol by Cu-Pd/Al2O3 in Near-Critical Isopropanol

Catalytic Transfer Hydrogenation of Furfural to 2-Methylfuran and 2-Methyltetrahydrofuran over Bimetallic Copper-Palladium Catalysts.

Catalytic in-situ hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran over Cu-based catalysts with methanol as a hydrogen donor

Efficient catalytic transfer hydrogenation of furfural to furfuryl alcohol in near-critical isopropanol over Cu/MgO-Al2O3 catalyst

In-situ Reduction of Furfural to Furfuryl Alcohol with Hydrogen Derived from Aqueous-Phase Reforming of Methanol

Efficient one-pot conversion of furfural into 2-methyltetrahydrofuran using non-precious metal catalysts

Highly dispersed PdCu supported on MCM-41 for efficiently selective transfer hydrogenation of furfural into furfuryl alcohol

Enhanced Catalytic Transfer Hydrogenation of Biomass-Based Furfural into 2-Methylfuran over Multifunctional Cu-Re Bimetallic Catalysts

Total Hydrogenation of Furfural over Pd/Al2O3 and Ru/ZrO2 Mixture under Mild Conditions: Essential Role of Tetrahydrofurfural As an Intermediate and Support Effect

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol over in-situ prepared nano Cu-Pd/C catalyst using formic acid as hydrogen source

Hydrogenation of Biomass-Derived Furfural to Tetrahydrofurfuryl Alcohol over Hydroxyapatite-Supported Pd Catalyst under Mild Conditions

Selective Hydrogenation of Furfural over Pt Based and Pd Based Bimetallic Catalysts Supported on Modified Multiwalled Carbon Nanotubes (MWNT)

Pd–Cu/SiO2 Catalyzed Efficient Hydrogen Transfer of Cyclohexanol and Furfural Platforms into Cyclohexanone and Furfuryl Alcohol

Selective hydrogenation of 5‐hydroxymethylfurfural to 5‐hydroxymethyltetrahydrofurfural over heterogeneous Pd catalyst under mild conditions

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst

Preparation of Tetrahydrofuran by Hydrogenation of Furan Catalyzed by Pd/C Catalyst

Transfer Hydrogenation of Biomass-Derived Furfural to 2-Methylfuran over CuZnAl Catalysts

Selective Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol in 2-Butanol over an Equimolar Ni-Cu-Al Catalyst Prepared by the Co-Precipitation Method

Facile Preparation of Pd/UiO-66-v for the Conversion of Furfuryl Alcohol to Tetrahydrofurfuryl Alcohol under Mild Conditions in Water

A Highly Selective and Efficient Pd/Ni/Ni(OH)2/C Catalyst for Furfural Hydrogenation at Low Temperatures