Abstract:The sluggish redox kinetics and the severe shuttle effect of soluble lithium polysulfides (LiPSs) are the main key issues which would hinder the development of lithium-sulfur (Li-S) batteries. In this work, a nickel-doped vanadium selenide in-situ grows on reduced graphene oxide(rGO) to form a two-dimensional (2D) composite Ni-VSe 2 /rGO by a simple solvothermal method. When it is used as a modified separator in Li-S batteries, the Ni-VSe 2 /rGO material with the doped defect and super-thin layered structure can greatly adsorb LiPSs and catalyze the conversion reaction of LiPSs, resulting in effectively reducing LiPSs diffusion and suppressing the shuttle effect. More importantly, the cathode-separator bonding body is first developed as a new strategy of electrode-separator integration in Li-S batteries, which not only could decrease the LiPSs dissolution and improve the catalysis performance of the functional separator as the upper current-collector, but also is good for the high sulfur loading and the low electrolyte/sulfur (E/S) ratio for high energy density Li-S batteries. When the Ni-VSe 2 /rGO-PP (polypropylene, Celgard 2400) modified separator is applied, the Li-S cell can retain 510.3 mA h g -1 capacity after 1190 cycles at 0.5 C. In the electrode-separator integrated system, the Li-S cell can still maintain 552.9 mA h g -1 for 190 cycles at a sulfur loading 6.4 mg cm -2 and 4.9 mA h cm -2 for 100 cycles at a sulfur loading 7.0 mg cm -2 . The experimental results indicate that both the doped defect engineering and the super-thin layered structure design might optimally be chosen to fabricate a new modified separator material, and especially, the electrode-separator integration strategy would open a practical way to promote the electrochemical behavior of Li-S batteries with high sulfur loading and low E/S ratio.

VSe 2 /V 2 C heterocatalyst with built-in electric field for efficient lithium-sulfur batteries: Remedies polysulfide shuttle and conversion kinetics

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Engineering Fe and V Coordinated Bimetallic Oxide Nanocatalyst Enables Enhanced Polysulfides Mediation for High Energy Density Li-S Battery.

A Rational Design of a CoS2-CoSe2 Heterostructure for the Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries

Polymorph Interface Strategy Presents Avenues for Kinetics-Enhanced and Dendrite-Free Lithium Sulfur Batteries

In Situ Construction of 3D 1T-VS2/V2C Heterostructures for Enhanced Polysulfide Trapping and Catalytic Conversion in Lithium-Sulfur Batteries

Improving Performances of Lithium-Sulfur Cells via Regulating of VSe 2 Functional Mediator with Doping-Defect Engineering and Electrode-Separator Integration Strategy

Selenium vacancies enable efficient immobilization and bidirectional conversion acceleration of lithium polysulfides for advanced Li-S batteries

Spontaneous Built‐In Electric Field in C 3 N 4 ‐CoSe 2 Modified Multifunctional Separator with Accelerating Sulfur Evolution Kinetics and Li Deposition for Lithium‐Sulfur Batteries

Bidirectional tandem catalysis coupled with interface engineering and Se vacancies for accelerating the polysulfide conversion

In-situ Grown Ti3C2Tx@CoSe2 Heterostructure As Trapping-Electrocatalyst for Accelerating Polysulfides Conversion in Lithium-Sulfur Battery

Bimetallic sulfides heterostructure efficient adsorption and catalytic of polysulfides for high-performance lithium-sulfur batteries

Spontaneous Built-In Electric Field in C3N4-CoSe2 Modified Multifunctional Separator with Accelerating Sulfur Evolution Kinetics and Li Deposition for Lithium-Sulfur Batteries

Cubic CoSe2@carbon as polysulfides adsorption-catalytic mediator for fast redox kinetics and advanced stability lithium-sulfur batteries

Built-in Electric Field Within CoSe2-FeSe2 Heterostructure for Enhanced Sulfur Reduction Reaction in Li-S Batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

A rational design of V2O3/VN heterostructures with high-efficient chemisorption and electrocatalytic activity for polysulfides in lithium-sulfur batteries

Tin Disulfide Embedded on Porous Carbon Spheres for Accelerating Polysulfide Conversion Kinetics Toward Lithium-Sulfur Batteries.

A Bifunctional N-doped Carbon Nanosheet Embedded with VN/Mo2C Heterointerfaces Electrocatalyst for Expediting Sulfur Redox and Lithium Regulation Toward Advanced Li-S Battery

CoSe2@C-N/CNT-modified separator for highly efficient lithium-sulphur battery