Abstract:Ductile-regime machining has been used to generate damage-free surface of hard and brittle materials by setting the cutting depth to be smaller than the ductile-brittle transition depth (DBTD). However, the ductile-regime cutting of sapphire remains challenging owing to its extreme hardness, small DBTD, serious surface fractures, and severe tool wear. To solve this problem, ion implantation-assisted elliptical vibration cutting (Ii-EVC) has been proposed in this study to enhance the machinability of hard and brittle materials. Taking sapphire as an example, high-energy phosphorus ions were implanted into the workpiece to modify its surface. Nanoindentation tests revealed that the modified materials undergo plastic and elastic deformation more easily due to the decrease in hardness and modulus. Compared with nanocutting without implantation assistance, the DBTD of implanted sapphire has been increased by more than five times. The advantageous effects of Ii-EVC achieve great enhancement in machinability, including surface fractures suppression, tool-wear reduction, chips morphology transformation from discontinuous to continuous, and cutting force decrease. Furthermore, even near the cracks in the brittle region after Ii-EVC, the subsurface microstructure showed a more complete lattice arrangement and a strain distribution close to zero, indicating that crack propagation was effectively suppressed. Due to the promoted localized plastic deformation, the stress distribution in the implanted material is much smaller than that in pristine workpiece. Implantation-induced defects not only serve as a core for absorbing external energy from the high-frequency vibration and improving the in-grain deformation but also facilitate the formation of shear bands. The interface with high distortion between the modified layer and substrate can effectively dissipate strain energy and hinder crack propagation to the free surface. The turning experiments verified that Ii-EVC can achieve better surface quality, less tool wear and higher optical transmittance. Overall, Ii-EVC addresses the challenges of tool breakage and surface fracture caused by high-frequency collision between tool and workpiece in traditional EVC, overcomes the problem of limited modification depth in ion implantation, and increases the ductile-regime removal depth of extremely hard and brittle materials to several microns. Such findings demonstrate that Ii-EVC is a promising method for the ultra-precision manufacturing of advanced materials.

Nano material removal mechanism of 4H-SiC in ion implantation-assisted machining

Nano-cutting mechanism of ion implantation-modified SiC: reducing subsurface damage expansion and abrasive wear

Modification Mechanism of Collaborative Ions Implanted into 4H-Sic by Atomic Simulation and Experiment

Molecular dynamics analysis of the influence of ion implantation parameters on ultra-precision machining of silicon carbide

Molecular Dynamics Simulation of Ultra-Precision Machining 3C-Sic Assisted by Ion Implantation

Mechanical properties and indentation-induced phase transformation in 4H–SiC implanted by hydrogen ions

A Numerical Analysis of Ductile Deformation during Nanocutting of Silicon Carbide via Molecular Dynamics Simulation

Nanocutting mechanism of 6H-SiC investigated by scanning electron microscope online observation and stress-assisted and ion implant-assisted approaches

Molecular Dynamics Simulation of Ion-Implanted Single-Crystal 3C-Sic Nano-Indentation

Investigation of Nanocutting Characteristics of Off-Axis 4H-Sic Substrate by Molecular Dynamics

Nanoindentation Study of Silicon-implanted Monocrystal Cubic Silicon Carbide

Molecular Dynamics Simulations Of Nano-Cutting Of 4h-Silicon Carbide (Sic) By Two Diamond Tools

Improvement mechanism of brittle-plastic transition and residual stress in scratching 4H-SiC implanted by hydrogen ions

Simulation and experimental study on limited cutting and heat effect of silicon carbide

Material Removal Characteristics of Single-Crystal 4H-SiC Based on Varied-Load Nanoscratch Tests

MD Simulation of Stress-Assisted Nanometric Cutting Mechanism of 3C Silicon Carbide

Investigation on the Machining Mechanism of Silicon Modified by Au Ion Irradiation in Elliptical Vibration Diamond Cutting

Nanometric Cutting of Single Crystal Silicon Surfaces Modified by Ion Implantation

EHTT2022-Material removal characteristics of single crystal 4H-SiC based on varied-load nanoscratch tests

Cutting mechanism of reaction-bonded silicon carbide in laser-assisted ultra-precision machining

Investigation on the Material Removal Mechanism in Ion Implantation-Assisted Elliptical Vibration Cutting of Hard and Brittle Material