Abstract:Determination and monitoring of the mean sea level especially in the coastal areas are essential, environmentally, and as a vertical datum. Ground-based Global Navigation Satellite System Reflectometry (GNSS-R) is an innovative way which is becoming a reliable alternative for coastal sea-level altimetry. Comparing to traditional tide gauges, GNSS-R can offer different parameters of sea surface, one of which is the sea level. The measurements derived from this technique can cover wider areas of the sea surface in contrast to point-wise observations of a tide gauge.  We use long-term ground-based GNSS-R observations to estimate sea level. The dataset includes one-year data from January to December 2016. The data was collected by a coastal GNSS-R experiment at the Onsala space observatory in Sweden. The experiment utilizes three antennas with different polarization designs and orientations. The setup has one up-looking, and two sea-looking antennas at about 3 meters above the sea surface level. The up-looking antenna is Right-Handed Circular Polarization (RHCP). The sea-looking antennas with RHCP and Left-Handed Circular Polarization (LHCP) are used for capturing sea reflected Global Positioning System (GPS) signals. A dedicated reflectometry receiver (GORS type) provides In-phase and Quadrature (I/Q) correlation sums for each antenna based on the captured interferometric signal. The generated time series of I/Q samples from different satellites are analyzed using the Least Squares Harmonic Estimation (LSHE) method. This method is a multivariate analysis tool which can flexibly retrieve the frequencies of a time series regardless of possible gaps or unevenly spaced sampling. The interferometric frequency, which is related to the reflection geometry and sea level, is obtained by LSHE with a temporal resolution of 15 minutes. The sea level is calculated based on this frequency in six modes from the three antennas in GPS L1 and L2 signals.Our investigation shows that the sea-looking antennas perform better compared to the up-looking antenna. The highest accuracy is achieved using the sea-looking LHCP antenna and GPS L1 signal. The annual Root Mean Square Error (RMSE) of 15-min GNSS-R water level time series compared to tide gauge observations is 3.7 (L1) and 5.2 (L2) cm for sea-looking LHCP, 5.8 (L1) and 9.1 (L2) cm for sea-looking RHCP, 6.2 (L1) and 8.5 (L2) cm for up-looking RHCP. It is worth noting that the GPS IIR block satellites show lower accuracy due to the lack of L2C code. Therefore, the L2 observations from this block are eliminated.

Determination of Mean Sea Level by Tide Level Observations Using Ultrasonic Sensors

Monitoring the vertical changes of a tidal flat using a MEMS accelerometer array

The Response of Tidal Wave and Engineering Water Level to Long-Term Sea Level Variation in the Jiaozhou Bay

Tidal Analysis of High and Low Water Data

Analysis and Prediction of Tidal Measurement Data from Temporary Stations using the Least Squares Method

Determining Undersampled Coastal Tidal Harmonics Using Regularized Least Squares

Tidal harmonics retrieval using GNSS-R dual-frequency complex observations

Analysis of Tidal Amplitude Changes Using the EMD Method

Sea-Level Estimation from GNSS-IR under Loose Constraints Based on Local Mean Decomposition

A study on the quality of GNSS signals for extracting the sea level height and tidal frequencies utilizing the GNSS-IR approach

Mean Sea Surface Model over the Sea of Japan Determined from Multi-Satellite Altimeter Data and Tide Gauge Records

Low-cost multi-GNSS, single-frequency RTK averaging for marine applications: accurate stationary positioning and vertical tide measurements

Performance Assessment of GNSS-R Polarimetric Observations for Sea Level Monitoring

Multi-constellation GNSS interferometric reflectometry for tidal analysis: mitigations for K1 and K2 biases due to GPS geometrical errors

Estimates of Baroclinic Tidal Sea Level and Currents from Lagrangian Drifters and Satellite Altimetry

Shipborne GNSS-Determined Sea Surface Heights Using Geoid Model and Realistic Dynamic Topography

Coastal Sea Level and Related Fields from Existing Observing Systems

Quasi zenith satellite system-reflectometry for sea-level measurement and implication of machine learning methodology

Sea Surface Height Measurements Based on Multi-Antenna GNSS Buoys

GNSS-IR Inshore Tide Measurement Based on Low-cost Chipset

Regional tidal modeling on the European coast using tide gauges and satellite altimetry