Abstract:Purpose This study aims to comprehensively investigate the mixed-mode fracture behavior and mechanical properties of selective laser sintering (SLS) polyamide 12 (PA12) components, considering different build orientations and layer thicknesses. The primary objectives include the following. Conducting mixed-mode fracture and mechanical analyses on SLS PA12 parts. Investigating the influence of build orientation and layer thickness on the mechanical properties of SLS-printed components. Examining the fracture mechanisms of SLS-produced Arcan fracture and tensile specimens through experimental methods and finite element analyses. Design/methodology/approach The research used a combination of experimental techniques and numerical analyses. Tensile and Arcan fracture specimens were fabricated using the SLS process with varying build orientations (X, X–Y, Z) and layer thicknesses (0.1 mm, 0.2 mm). Mechanical properties, including tensile strength, modulus of elasticity and critical stress intensity factor, were quantified through experimental testing. Mixed-mode fracture tests were conducted using a specialized fixture, and finite element analyses using the J-integral method were performed to calculate fracture toughness. Scanning electron microscopy (SEM) was used for detailed morphological analysis of fractured surfaces. Findings The investigation revealed that the highest tensile properties were achieved in samples fabricated horizontally in the X orientation with a layer thickness of 0.1 mm. Additionally, parts manufactured with a layer thickness of 0.2 mm exhibited favorable mixed-mode fracture behavior. The results emphasize the significance of build orientation and layer thickness in influencing mechanical properties and fracture behavior. SEM analysis provided valuable insights into the failure mechanisms of SLS-produced PA12 components. Originality/value This study contributes to the field of additive manufacturing by providing a comprehensive analysis of the mixed-mode fracture behavior and mechanical properties of SLS-produced PA12 components. The investigation offers novel insights into the influence of build orientation and layer thickness on the performance of such components. The combination of experimental testing, numerical analyses and SEM morphological observations enhances the understanding of fracture behavior in additive manufacturing processes. The findings contribute to optimizing the design and manufacturing of high-quality PA12 components using SLS technology.

Fracture Analysis of 316L Specimens Fabricated via Material Extrusion Additive Manufacturing: Influence of Building Orientation and Notch Acuity

Orientation effects on the fracture behaviour of additively manufactured stainless steel 316L subjected to high cyclic fatigue

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Anisotropy in tensile properties and fracture behaviour of 316L stainless steel parts manufactured by fused deposition modelling and sintering

Mixed-mode fracture prediction of acrylonitrile butadiene styrene material fabricated via fused deposition modeling

Anisotropy of Mechanical Properties and Residual Stress in Additively Manufactured 316L Specimens

Fracture assessment of inclined double keyhole notches in polylactic acid specimens fabricated by fused deposition modeling and traditional method

Fracture behavior of double edge notch AlSi10Mg alloy fabricated by laser powder bed fusion

Exploring mixed-mode fracture behavior and mechanical properties of selective laser sintered polyamide 12 components

The Influence of Residual Stress on Fatigue Crack Growth Rates in Stainless Steel Processed by Different Additive Manufacturing Methods

Failure Analysis and Anisotropy Evaluation of 3D-Printed Tensile Test Specimens of Different Geometries and Print Raster Patterns

Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage

Anisotropic and elastoplastic mode‐I fracture toughnesses of three additively manufactured polymers fabricated via material extrusion and powder bed fusion

Crack Growth Behavior of Additively Manufactured 316L Steel—Influence of Build Orientation and Heat Treatment

Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L

Anisotropic Ductile Fracture Of A Stainless Steel Under Biaxial Loading: Experiments And Predictions

Quasi-static and dynamic tensile behaviour of 316L stainless steels: Rolled versus laser-powder bed fusion (LPBF) fabricated samples

The Influence of Microstructural Arrangement on the Failure Characteristics of 3D-Printed Polymers: Exploring Damage Behaviour in Acrylonitrile Butadiene Styrene

Influence of printing orientation on power-law hardening and ductile damage parameters for 3D-printed SS316L steel: experimental and FEA approach

Effects of Building Direction and Loading Mode on the High Cycle Fatigue Strength of the Laser Powder Bed Fusion 316L

Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing