Abstract:Arterial thrombus formation is directly related to the mechanical shear experienced by platelets within flow. High shear strain rates (SSRs) and large shear gradients cause platelet activation, aggregation and production of thrombus. This study, for the first time, investigates the influence of pulsatile flow on local haemodynamics within sutured microarterial anastomoses. We measured physiological arterial waveform velocities experimentally using Doppler ultrasound velocimetry, and a representative example was applied to a realistic sutured microarterial geometry. Computational geometries were created using measurements taken from sutured chicken femoral arteries. Arterial SSRs were predicted using computational fluid dynamics (CFD) software, to indicate the potential for platelet activation, deposition and thrombus formation. Predictions of steady and sinusoidal inputs were compared to analyse whether the addition of physiological pulse characteristics affects local intravascular flow characteristics. Simulations were designed to evaluate flow in pristine and hand-sutured microarterial anastomoses, each with a steady-state and sinusoidal pulse component. The presence of sutures increased SSRmax in the anastomotic region by factors of 2.1 and 2.3 in steady-state and pulsatile flows respectively, when compared to a pristine vessel. SSR values seen in these simulations are analogous to the presence of moderate arterial stenosis. Steady-state simulations, driven by a constant inflow velocity equal to the peak systolic velocity (PSV) of the measured pulsatile flow, underestimated SSRs by ∼ 9% in pristine, and ∼ 19% in sutured vessels compared with a realistic pulse. Sinusoidal flows, with equivalent frequency and amplitude to a measured arterial waveform, represent a slight improvement on steady-state simulations, but still SSRs are underestimated by 1-2%. We recommend using a measured arterial waveform, of the form presented here, for simulating pulsatile flows in vessels of this nature. Under realistic pulsatile flow, shear gradients across microvascular sutures are high, of the order ∼ 7.9 × 106 m-1 s-1, which may also be associated with activation of platelets and formation of aggregates.

Modelling pulsatile blood flow through surgically coupled microvascular anastomoses

Experimental Study on Anastomotic Hemodynamics Using Tomographic Particle Image Velocimetry

Experimental Study on Hemodynamics of an End-to-side Anastomosis

Modeling of blood flow through sutured micro-vascular anastomoses

Improving the hemocompatibility of a porohyperelastic layered vascular graft using luminal reversal microflows

Influence of microvascular sutures on shear strain rate in realistic pulsatile flow

Blood-Flow Modelling Along and Trough a Braided Multi-Layer Metallic Stent

A hemodynamic model of artery bypass graft considering microcirculation function

Microvasculature‐on‐a‐Post Chip That Recapitulates Prothrombotic Vascular Geometries and 3D Flow Disturbance

Local Hemodynamic Disturbance Accelerates Early Thrombosis Of Small-Caliber Expanded Polytetrafluoroethylene Grafts

Clot Accumulation in 3D Microfluidic Bifurcating Microvasculature Network

Air-blood interface engineered microfluidic device to mimic shear rate gradient induced human bleeding model

Novel Simulation Model with Pulsatile Flow System for Microvascular Training, Research, and Improving Patient Surgical Outcomes

Optimum anastomosis angle of end-to-side microsurgical anastomosis for preventing future shear-related risk of thrombosis by computationalmodeling

Charting the Course of Blood Flow: Vessel-on-a-chip Technologies in Thrombosis Studies

Numerical modeling of hemodynamics scenarios of patient-specific coronary artery bypass grafts

Design of artificial vascular devices: Hemodynamic evaluation of shear-induced thrombogenicity

Investigating clot-flow interactions by integrating intravital imaging with in silico modeling for analysis of flow, transport, and hemodynamic forces

Efficiency and safety of microvascular anastomotic coupler for wrist revascularization in traumatic injuries

A multiphysics modeling approach for in-stent restenosis: Theoretical aspects and finite element implementation

Macro- And Microscale Variables Regulate Stent Haemodynamics, Fibrin Deposition And Thrombomodulin Expression