Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Surface controlled mechanism of water boiling for nuclear reactor fuel assembly

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Deciphering the molecular mechanism of water boiling at heterogeneous interfaces

Multiphase SPH Modeling of Water Boiling on Hydrophilic and Hydrophobic Surfaces

Molecular dynamics investigation of the effect of nanostructured surfaces on flow boiling

Molecular dynamics study on the enhancement of heterogeneous nucleate boiling of mixed liquid on superhydrophilic surfaces

Numerical Study on Bubble Departing Behavior from Heated Surface in Subcooled Pool Boiling

How does boiling occur in lattice Boltzmann simulations?

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Investigation of water bubble nucleation by using molecular dynamics simulation

Nucleation site interaction during boiling

A study of interface evolution-triggering different nucleate boiling heat transfer phenomenon on the structured surfaces

Enhancement of nucleate boiling by combining the effects of surface structure and mixed wettability: A lattice Boltzmann study

Direct Numerical Simulation of single bubble dynamics in nucleate pool boiling with micro-region modeling and thermal coupling to a solid wall

Nanoscale Thin-Film Boiling Processes on Heterogeneous Surfaces

A unifying criterion of the boiling crisis

Effect of Nanostructures of Different Sizes on Boiling and Nucleation: A Molecular Dynamics Study

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling

Surface topography controls bubble nucleation at rough water/silicon interfaces for different initial wetting states

The study of nanoscale boiling on hierarchical nanostructured surfaces using molecular dynamics simulation