Abstract:Advances in solid electrolytes (SEs) with superionic conductivity and stabilized electrode-electrolyte interfaces are key enablers for all solid-state batteries (SSBs) to meet the energy density and cost targets for next generation batteries for electric vehicles. Compared to their ceramic counterparts, sulfide- and thiophosphate-based electrolytes offer several key advantages, including (i) exceptionally high ionic conductivities up to 10 -2 S/cm (comparable to non-aqueous liquid electrolytes) as reported for Li 10 GeP 2 S 12 and Li 9.54 Si 1.74 P 1.44 S 11.7 Cl 0.3 , (ii) availability of low temperature and inexpensive synthesis routes to produce glass, glass-ceramic, and crystalline structures, and (iii) soft mechanical properties, which facilitates material processing. Among the drawbacks, sulfides have a narrow electrochemical window, hence limited electrochemical stability against Li-metal and cathodes and poor chemical stability including high sensitivity to moisture. Despite an intrinsic narrow thermodynamic range, most SEs rely on kinetic stability based on slow growth of the interfacial layer that has reasonable ionic conductivity and very low electronic conductivity. In addition to the thermodynamical instability, significant mechanical stresses develop in SE due to (i) volume changes of the electrode material during repeated lithiation (delithiation) and (ii) interface roughening from side reactions upon extended cycling. This effect often termed as “chemo-mechanical effect” results in poor interfacial contact between the SE and cathode. The talk will highlight a few material based approaches towards addressing the interfacial stabilities (as mentioned above) between Li 3 PS 4 SE and lithium-ion cathodes such as NMC. The area specific resistance (ASR) between SE-Cathode interfaces were optimized by coating cathode particles, varying stack pressure and doping the SE compositions. Acknowledgment - This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and is supported by Asst. Secretary, Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (VTO) through the Advanced Battery Materials Research (BMR) Program

Thermal Stability between Sulfide Solid Electrolytes and Oxide Cathode

Thermal Stability of Sulfide Solid Electrolyte with Lithium Metal

Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Air Stability and Interfacial Compatibility of Sulfide Solid Electrolytes for Solid‐State Lithium Batteries: Advances and Perspectives

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Stable Interface between Sulfide Solid Electrolyte and Room-Temperature Liquid Lithium Anode

Interplay of Cathode–Halide Solid Electrolyte in Enhancing Thermal Stability of Charged Cathode Material in All-Solid-State Batteries

Air Stability of Solid-State Sulfide Batteries and Electrolytes

Chemical stability of sulfide solid-state electrolytes: stability toward humid air and compatibility with solvents and binders

Research progress and prospect in typical sulfide solid-state electrolytes

Sulfide Solid Electrolytes for Lithium Battery Applications

Advances in air stability of sulfide solid electrolytes with high ion conductivity

Current Status and Future Directions in Environmental Stability of Sulfide Solid-State Electrolytes for All-Solid-State Batteries

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

(Invited) Investigations on Sulfide Solid-Electrolyte Cathode Interfaces

Electrolyte for Solid Lithium-Sulfur Batteries with High Safety and High Specific Energy

Cathode–Sulfide Solid Electrolyte Interfacial Instability: Challenges and Solutions

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes