Abstract:Hard carbon (HC) is considered to be an anode material with great promise for sodium-ion batteries (SIBs), on account of the advantages of high reversible specific capacity and abundant source. Nevertheless, its poor high-rate and long-term cycle performance, which were caused by the unrestricted decomposition of the electrolyte and sustained formation of the solid–electrolyte interface (SEI) film, limit the practical use. Herein, the balance between high mechanical strength and good flexibility of the SEI layer formed in the discharge/charge process was achieved by modifying the surface of the HC anode with a proper amount of AlF3 coating. In this way, the reversible specific capacity increased from 322 to 346 mA h g–1 at 20 mA g–1. Furthermore, the capacity retention at 100 mA g–1 for 100 cycles of the modified sample considerably increased from 47.4 to 76.5%, as well as rate performance was significantly improved from 69 to 135 mA h g–1 at 200 mA g–1. The improvement of performance is mainly attributed to the rational distribution of organic–inorganic phase components in the SEI film (about 43% inorganic phase and 57% organic phase), which ensures the stability of the SEI layer in the continuous discharge/charge process, resulting in a superior performance. Therefore, this work not only provides an effective method to synthesize HC anode with high electrochemical performance in SIBs but also clearly illustrates the mechanism of how the coating affects the composition of the SEI film to improve the performance of materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01497.SEM images of HC particles; PSD diagram; TG curve; XRD pattern and Raman spectrum photograph; infrared spectra; EDS spectrum of the profile and EDS images of the electrode surface after five cycles; CV curves and rate capability diagram under different experimental conditions; and charge–discharge curves and cycle performance diagram at 20 mA g–1 of 3.0 wt % 3 (PDF)This article has not yet been cited by other publications.

Carbon coating with different carbon sources on rare earth hydrogen storage alloy

Effect of carbon coating on the electrochemical properties of La–Y–Ni-based hydrogen storage alloys

Effect of carbon coating on electrochemical properties of AB3.5-type La–Y–Ni-based hydrogen storage alloys

Unraveling the synergistic effects and mechanisms of nano-carbon modification on metal hydride alloys for enhanced electrochemical performance in energy storage applications

Influence of Rapid Quenching on the Microstructure and Electrochemical Properties of Co-free LaNi4.92Sn0.33LaNi4.92Sn0.33 Hydrogen Storage Electrode Alloy

The different effect of Co3O4 or/and carbon fiber originated from biomass on the electrochemical hydrogen storage performance of Co2B alloy

Enhanced electrochemical hydrogen storage performance of Co 9 S 8 material by doping with cobalt nanoparticles embedded hollow porous carbon nanofibers

Effect of flower-like Ni/C nanocrystal on electrochemical hydrogen storage properties of Co–P alloy

Study of Lithiation Mechanisms of High Performance Carbon-Coated Si Anodes by In-Situ Microscopy

Synthesis of Mo2C@MWCNTs and its application in improving the electrochemical hydrogen storage properties of Co0.9Cu0.1Si alloy

Enhanced electrochemical hydrogen storage properties of Ti49Zr26Ni25 quasicrystal alloy by doping with CO2-activated porous graphene

The Surface Capacitance Behavior and Its Contribution to the Excellent Performance of Cobalt Ferrite/carbon Anode in Lithium Storage

Effect of Mesoporous Α-Fe2o3 Nanoparticles Doping on the Structure and Electrochemical Hydrogen Storage Properties of Co0.9Cu0.1Si Alloy

Synergistic effect of hydrogen bond and carbon coating to suppress the capacity and voltage fading in Li-Rich cathode

Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries

Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes

Honeycomb-like nitrogen-doped porous carbon decorated with Co3O4 nanoparticles for superior electrochemical performance pseudo-capacitive lithium storage and supercapacitors

Cobalt Nanoparticles Synergize with Oxygen‐Containing Functional Groups to Realize Fast and Stable Potassium Storage for Carbon Anode

Carbon thermal shock assisted activated carbon for lead carbon batteries: Uniform loading of lead nanoparticles and pore regulation

CO2 Etching Modulates Lithium and Sodium Storage Performance of Hard-Soft Carbon Composite-Based Freestanding Thick Electrodes