Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Propagating compaction bands in confined compression of snow: Experiment and Modelling

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Local Fluctuations and Spatial Correlations in Granular Flows under Constant-Volume Quasistatic Shear.

Long-Term One-Dimensional Compression Tests and Fractional Creep Model of Compacted Snow

Effects of Densities and Sintering Time on Elastic Moduli of Compacted Antarctic Snow Near Zhongshan Station and the Corresponding Microstructure Evolution

A model for French-press experiments of dry snow compaction

Incremental behavior of granular soils: a strain response envelope perspective

DEM analyses of mesoscopic failure mechanism and stress bearing mechanism of compacted snow subjected to unconfined compressive loading

Compaction band localization in geomaterials: a mechanically consistent failure criterion

Measurements of Snow Strain Combined with Finite Element Simulations

Constitutive description of snow at finite strains by the modified cam‐clay model and an implicit gradient damage formulation

Compacting an assembly of soft balls far beyond the jammed state: insights from 3D imaging

Role of Ice Mechanics on Snow Viscoplasticity

Numerical investigation of crack propagation regimes in snow fracture experiments

Discrete element model for high strain rate deformations of snow

Dynamic strain localization into a compaction band via a phase-field approach

Microstructure-based simulations of the viscous densification of snow and firn

A soft departure from jamming: the compaction of deformable granular matter under high pressures

Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Theory

Numerical simulation of wave propagation and snow failure from explosive loading