Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

Fatigue-constrained topology optimization using the constrained natural element method

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Fatigue-resistance topology optimization of continuum structure by penalizing the cumulative fatigue damage

Fatigue-constrained topology optimization method for orthotropic materials based on an expanded Tsai-Hill criterion

A fatigue-resistance topology optimization formulation for continua subject to general loads using rainflow counting

Optimal topologies considering fatigue with reliability constraint

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

Application of Virtual Laminated Element in the Topology Optimization of Structures

Topology Optimization of Compliant Mechanisms Considering Manufacturing Uncertainty, Fatigue, and Static Failure Constraints

A unified approach for topology optimization with local stress constraints considering various failure criteria: von Mises, Drucker-Prager, Tresca, Mohr-Coulomb, Bresler- Pister and Willam-Warnke

Topology Optimization of Laminated Composite Structures with Design-Dependent Loads

Alternating optimization of design and stress for stress-constrained topology optimization

Maximum stress minimization via data-driven multifidelity topology design

TOPOLOGICAL OPTIMIZATION OF CONTINUUM STRUCTURE UNDER THE STRATEGY OF GLOBALIZATION OF STRESS CONSTRAINTS

Topology optimization with continuously varying load magnitude and direction for compliance minimization

Defect-Driven topology optimization for fatigue design of additive manufacturing structures: Application on a real industrial aerospace component

TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURE WITH GLOBALIZATION OF STRESS CONSTRAINTS BY ICM METHOD

Structural topology optimization considering both performance and manufacturability: strength, stiffness, and connectivity

Topology Optimization for Minimum Compliance with Material Volume and Buckling Constraints under Design-Dependent Loads

Thermo‐elastic topology optimization with stress and temperature constraints