Abstract:SummaryIt is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high‐strength elastic materials, such as fiber‐reinforced polymer (FRP) and high‐strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high‐strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic‐perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree‐of‐freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R‐μp‐T‐α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.

A yield displacement distribution‐based approach for strength assignment to lateral force‐resisting elements having strength dependent stiffness

Distribution of Shear Force: A Multi-Level Assessment of a Cantilever RC Slab

ELASTIC STABILITY OF STEEL PLATE SHEAR WALL WITH CROSS STIFFENERS IN SHEAR

THE EQUIVALENT NEGATIVE FLEXURAL STIFFNESS OF AXIAL FORCES IN SWAY-PROHIBITED COLUMNS

Yield Point Spectra with constant ductility

Inelastic Storey-Buckling Factor of Steel Frames

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

STUDY ON THE INFLUENCE OF POST-YIELDING STIFFNESS TO THE SEISMIC RESPONSE OF BUILDING STRUCTURES

Influence of Post-Yielding Stiffness to Seismic Response of Building Structures

Buckling and yield strength estimation of architected materials under arbitrary loads

Influence of Axial Stress on Shear Response of Reinforced Concrete Elements

Ductility-strength and strength-ductility relations for a constant yield displacement seismic design procedure

Cyclic performance for low-yield point steel plate shear walls with diagonal T-shaped-stiffener

Seismic Responses of Postyield Hardening Single–degree‐of‐freedom Systems Incorporating High‐strength Elastic Material

Lateral Stiffness of Steel Shear Wall Systems

Hybrid-member Stiffness Matrix Accounting for Geometrical Nonlinearity and Member Inelasticity in Semi-Rigid Frameworks

Strength modeling of sheet metals from shear to plane strain tension

Response assessment and prediction of low yield point steel plate shear walls with curved corrugated web plates and reduced beam sections

Uncertainty in Distinct Element Modeling of Freestanding Structures Considering Stiffness Parameters

Cyclic Behavior of Improved Low-Yield Point Steel Plate Shear Walls with T-shaped Stiffeners

Role of anisotropic strength and stiffness in governing the initiation and propagation of yielding in polycrystalline solids